Laser beam interaction with materials for microscale applications

[1]  S. Lambrakos,et al.  Temperature, macrostructure and hardness in high strength low alloy steel welds , 2003 .

[2]  T. Clyne,et al.  Application of a three-dimensional heat flow model to treat laser drilling of carbon fibre composites , 1998 .

[3]  R. Ganesh,et al.  A Model for Laser Hole Drilling in Metals , 1996 .

[4]  T. DebRoy,et al.  Macroporosity free aluminum alloy weldments through numerical simulation of keyhole mode laser welding , 2003 .

[5]  W. W. Duley,et al.  Laser Material Interactions of Relevance To Metal Surface Treatment , 1986 .

[6]  J. Mazumder,et al.  Heat transfer model for cw laser material processing , 1980 .

[7]  T. DebRoy,et al.  Liquid metal expulsion during laser irradiation , 1992 .

[8]  J. Ready.  Effects of high-power laser radiation , 1971 .

[9]  Wolfgang Schulz,et al.  Heat conduction losses in laser cutting of metals , 1993 .

[10]  M. Sentis,et al.  Analytical thermal model of ultraviolet laser ablation with single‐photon absorption in the plume , 1995 .

[11]  Satish G. Kandlikar,et al.  Handbook of Phase Change: Boiling and Condensation , 1999 .

[12]  Alloying element vaporization during laser spot welding of stainless steel , 2003 .

[13]  Peter Berger,et al.  The effect of plasma formation on beam focusing in deep penetration welding with CO2 lasers , 1995 .

[14]  Melting and vaporization for large-area film removal with a chemical oxygen–iodine laser , 1997 .

[15]  Vitali I. Konov,et al.  Micromachining with ultrashort laser pulses: from basic understanding to technical applications , 2003, Advanced Laser Technologies.

[16]  G. Chryssolouris.  Laser Machining: Theory and Practice , 1991 .

[17]  M. Modest.  Three-dimensional, transient model for laser machining of ablating/decomposing materials , 1996 .

[18]  J. Hermann,et al.  Plasma formation resulting from the interaction of a laser beam with a solid metal target in an ambient gas , 1993 .

[19]  W M Steen,et al.  Laser material processing—an overview , 2003 .

[20]  C. Grigoropoulos,et al.  Computational study of heat transfer and gas dynamics in the pulsed laser evaporation of metals , 1995 .

[21]  Nadezhda M. Bulgakova,et al.  Pulsed laser ablation of solids: transition from normal vaporization to phase explosion , 2001 .

[22]  M. Sparks.  Theory of laser heating of solids: Metals , 1976 .

[23]  G. Simon,et al.  On the gas kinetics of laser-induced evaporation of metals , 1990 .

[24]  Malcolm C. Gower,et al.  Microhole drilling using reshaped pulsed Gaussian laser beams , 2001, Optics + Photonics.

[25]  A. Kar,et al.  Two‐dimensional model for material damage due to melting and vaporization during laser irradiation , 1990 .

[26]  G Herziger.  Physics Of Laser Materials Processing , 1986, Other Conferences.

[27]  Xianfan Xu,et al.  Non-Equilibrium Phase Change in Metal Induced by Nanosecond Pulsed Laser Irradiation , 2002 .

[28]  C. Knight.  Theoretical Modeling of Rapid Surface Vaporization with Back Pressure , 1979 .

[29]  Remy Fabbro,et al.  Experimental study of continuous CO2 laser welding at subatmospheric pressures , 1995 .

[30]  T. Maiman.  Stimulated Optical Radiation in Ruby , 1960, Nature.

[31]  Xianfan Xu,et al.  Transport Phenomena and Droplet Formation During Pulsed Laser Interaction With Thin Films , 2000 .

[32]  H. W. Bergmann,et al.  Physical and material aspects in using visible laser pulses of nanosecond duration for ablation , 1996 .

[33]  Understanding high‐power fiber‐optic laser beam delivery , 1996 .

[34]  Yuwen Zhang,et al.  Vaporization, melting and heat conduction in the laser drilling process , 1999 .

[35]  Nobuyuki Abe,et al.  Beam hole behaviour during laser beam welding , 1983 .

[36]  Sergei I. Anisimov,et al.  Instabilities in Laser-Matter Interaction , 1995 .

[37]  A. H. Kahn,et al.  Theory of the Infrared Absorption of Carriers in Germanium and Silicon , 1955 .

[38]  I. Ursu,et al.  High‐intensity laser irradiation of metallic surfaces covered by periodic structures , 1987 .

[39]  Janez Možina,et al.  Laser pulse shape influence on optically induced dynamic processes , 1998 .

[40]  J. Mazumder,et al.  A stagnation flow analysis of the heat transfer and fluid flow phenomena in laser drilling , 2000 .

[41]  Surface processing with non-Gaussian beams , 1997 .

[42]  Isamu Miyamoto,et al.  Beam Absorption Mechanism In Laser Welding , 1986, Other Conferences.

[43]  J. Mazumder,et al.  One‐dimensional steady‐state model for damage by vaporization and liquid expulsion due to laser‐material interaction , 1987 .

[44]  R. E. Wagner,et al.  Laser drilling mechanics , 1974 .

[45]  T. A. Hall.  Laser induced plasmas and applications: Edited by Leon J. Radziemski and David A. Cremers, Marcel Dekker Inc., New York and Basel, 1989. Price: $99.75 US and Canada; $119.50 all other countries. ISBN 0-8247-8078-7. Hardbound, 464 pp , 1991 .

[46]  T. W. Clyne,et al.  An analytical model for simulation of heat flow in plasma-sprayed thermal barrier coatings , 2005 .

[47]  Lin Li,et al.  Hydrodynamic Physical Modeling of Laser Drilling , 2002 .

[48]  Bekir Sami Yilbas,et al.  Thermal processes taking place in the bone during CO2 laser irradiation , 1996 .

[49]  T. Clyne,et al.  Quantification of Melt Ejection Phenomena During Laser Drilling , 2000 .

[50]  Inspec.  Properties of silicon , 1988 .

[51]  Mark T Bronski.  Development of a process for characterization of Nd:YAG crystals , 2003 .

[52]  B. Yilbas,et al.  Laser short-pulse heating of surfaces , 1999 .

[53]  V. Veiko,et al.  Two-phase mechanism of laser-induced removal of thin absorbing films. I. Theory , 1980 .

[54]  Todd J. Rockstroh,et al.  Spectroscopic studies of plasma during cw laser materials interaction , 1987 .

[55]  G. Herziger,et al.  Metal Precision Drilling with Lasers , 1986, Other Conferences.

[56]  B. Yilbas,et al.  Laser heating : an electron-kinetic theory approach and induced thermal stresses , 2000 .

[57]  Ryszard J. Pryputniewicz,et al.  Absolute shape measurements using high-resolution optoelectronic holography methods , 2000 .

[58]  G. Mourou,et al.  Laser ablation and micromachining with ultrashort laser pulses , 1997 .

[59]  T. DebRoy,et al.  Weld pool development during GTA and laser beam welding of Type 304 stainless steel; Part I - theoretical analysis , 1989 .

[60]  V. Semak,et al.  On the possibility of microwelding with laser beamsSandia is a multiprogram laboratory operated by S , 2003 .

[61]  O. Bostanjoglo,et al.  IMAGING AND MODELING OF PULSE LASER INDUCED EVAPORATION OF METAL FILMS , 1997 .

[62]  Doina Craciun,et al.  Laser-induced explosive boiling during nanosecond laser ablation of silicon , 2002, Advanced Laser Technologies.

[63]  Mechanical Characterizations of Laser Microwelds for MEMS Packaging , 2003 .

[64]  U. Paek,et al.  High-intensity laser-induced vaporization and explosion of solid material , 1971 .

[65]  Thomas Benziger,et al.  Prediction of weld data using process control based on surface temperature measurement for high-power energy flow processes , 1996, Other Conferences.

[66]  R. Peierls,et al.  Quantum theory of solids , 1956 .

[67]  T. R. Anthony,et al.  Surface rippling induced by surface‐tension gradients during laser surface melting and alloying , 1977 .

[68]  Isamu Miyamoto,et al.  The role of assist gas in CO2 laser welding. , 1985 .

[69]  T. DebRoy,et al.  Probing laser induced metal vaporization by gas dynamics and liquid pool transport phenomena , 1991 .

[70]  M. Tillack,et al.  Survey of mechanisms for liquid droplet ejection from surfaces exposed to rapid pulsed heating , 2003 .

[71]  A. Kar,et al.  Mathematical modeling of key‐hole laser welding , 1995 .

[72]  I. Barin,et al.  Thermochemical properties of inorganic substances , 1973 .

[73]  B. Yilbas,et al.  Material response to thermal loading due to short pulse laser heating , 2001 .

[74]  J. McGeough,et al.  Micromachining of Engineering Materials , 2001 .

[75]  Alexander Kaplan,et al.  An analytical modeling of time dependent pulsed laser melting , 1999 .

[76]  R. Russo,et al.  Evidence for phase-explosion and generation of large particles during high power nanosecond laser ablation of silicon , 2000 .

[77]  J. Powell,et al.  The Role of Oxidation in Laser Cutting Stainless and Mild Steel , 1991 .

[78]  Valentin Craciun,et al.  SUBSURFACE BOILING DURING PULSED LASER ABLATION OF GE , 1998 .

[79]  Abdel-Monem El-Batahgy,et al.  Effect of laser welding parameters on fusion zone shape and solidification structure of austenitic stainless steels , 1997 .

[80]  U. Paek,et al.  Thermal analysis of laser drilling processes , 1971 .

[81]  Y. Zvirin,et al.  NUMERICAL SIMULATION OF METAL DRILLING WITH A CO2 LASER BEAM , 1991 .

[82]  D. R. Atthey,et al.  On the Motion of an Intensely Heated Evaporating Boundary , 1975 .

[83]  B. Yilbas,et al.  Investigation into absorption of the incident laser beam during Nd:YAG laser processing of metals , 1996 .

[84]  Frank M. Gerner,et al.  Test Cell for a Novel Planar MEMS Loop Heat Pipe Based on Coherent Porous Silicon , 2003 .

[85]  Xinwei Wang.  Thermal and Thermomechanical Phenomena in Picosecond Laser Copper Interaction , 2004 .

[86]  Bekir Sami Yilbas,et al.  Liquid ejection and possible nucleate boiling mechanisms in relation to the laser drilling process , 1997 .

[87]  M. Mitchner,et al.  Partially ionized gases , 1973 .

[88]  K. Kobe.  The properties of gases and liquids , 1959 .

[89]  W. C. Swope,et al.  Laser drilling with focused Gaussian beams , 1992 .

[90]  A. Solan,et al.  Metal drilling with a CO2 laser beam. I. Theory , 1989 .

[91]  José Luis Ocaña,et al.  A mathematical model for penetration laser welding as a free-boundary problem , 1997 .

[92]  J. Dowden.  The Mathematics of Thermal Modeling: An Introduction to the Theory of Laser Material Processing , 2001 .

[93]  B. Yilbas.  Electron kinetic theory approach – one- and three-dimensional heating with pulsed laser , 2001 .

[94]  J. Jones,et al.  Time dependent ablation and liquid ejection processes during the laser drilling of metals , 2001 .

[95]  A. Luft,et al.  A study of thermal and mechanical effects on materials induced by pulsed laser drilling , 1996 .

[96]  Phiroze Kapadia,et al.  Capillary waves on the weld pool in penetration welding with a laser , 1989 .

[97]  T. Clyne,et al.  Laser drilling of cooling holes through plasma sprayed thermal barrier coatings , 2004 .

[98]  M. Allmen.  Laser drilling velocity in metals , 1976 .

[99]  R. Reid,et al.  The Properties of Gases and Liquids , 1977 .

[100]  A. Matsunawa,et al.  The role of recoil pressure in energy balance during laser materials processing , 1997 .

[101]  Lijun Li,et al.  An experimental study on the keyhole shapes in laser deep penetration welding , 2004 .

[102]  R. E. Harrington.  Application of the Theory of Heat Conduction to the Absorption of Blackbody Radiation , 1967 .

[103]  A. Kaplan.  A MODEL OF DEEP PENETRATION LASER WELDING BASED ON CALCULATION OF THE KEYHOLE PROFILE , 1994 .

[104]  R. Gardon.  Heat Transfer Between a Flat Plate and Jets of Air Impinging on It , 1962 .

[105]  P. Solana,et al.  An analytical model for the laser drilling of metals with absorption within the vapour , 1999 .

[106]  G Herziger,et al.  Fundamentals Of Laser Processing Of Materials , 1986, Other Conferences.

[107]  Shu-Yi Zhang,et al.  Laser heating of thin plate with time‐dependent absorptance , 2001 .

[108]  Y. Arata,et al.  The role of assist gas in CO2 laser welding , 1984 .

[109]  Roger Kelly,et al.  Critical assessment of thermal models for laser sputtering at high fluences , 1995 .

[110]  A. Kar,et al.  Two‐dimensional model for laser‐induced materials damage: Effects of assist gas and multiple reflections inside the cavity , 1992 .

[111]  A. Landé.  Zur Quantentheorie der Strahlung , 1926 .