论文信息 - Low-Loss 765 KV Pipe-Type Power Cable

Low-Loss 765 KV Pipe-Type Power Cable

A 765 kV Low-Loss Pipe-Type AC Transmission Cable with oil-impregnated laminar insulation of cellulose paper and poly-propylene film has been developed. The development of the prototype sample (using specially treated conventional oil), bending tests and EHV tests on one specimen are described. Test results indicate the integrity and reliability of this design.

E. Allam | H. Doepken | W. Cortelyou

[1] Z. Iwata,et al. New modified polyethylene paper proposed for UHV cable insulation , 1977, IEEE Transactions on Power Apparatus and Systems.

[2] E.M. Allam,et al. 138 kV prefab capacitive-graded joint for oil-filled cable systems , 1977, IEEE Transactions on Power Apparatus and Systems.

[3] H. Fujita,et al. Synthetic polymer papers suitable for use in EHV underground cable insulation , 1976, IEEE Transactions on Power Apparatus and Systems.

[4] J.S. Engelhardt,et al. Preliminary qualification of a HPOF pipe cable system for service at 765 kv , 1975, IEEE Transactions on Power Apparatus and Systems.

[5] E. Occhini,et al. Self-Contained Oil-Filled Cables for High Power Tranmission in the 750-1200 kV Range , 1974 .

[6] E. Forster,et al. A Study of the Electrical Insulation Characteristics of Oil-Impregnated Polypropylene Paper , 1972, IEEE Transactions on Electrical Insulation.

[7] Edward D. Eich,et al. EEI-Manufacturers 500/550 KV Cable Research Project. Cable B-High Pressure Oil Paper Pipe Type , 1971 .

[8] J. Vermeer,et al. TENAX,∗ a new low-loss high-temperature resistant synthetic paper for EHV cables and other electrical equipment , 1970 .

[9] D. Schieber,et al. Radial Oil Flow and Pressure Differences in Cable Insulations , 1962, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.