Surface micromachined capacitive ultrasonic transducer for underwater imaging

Abstract This study presents the primary design, fabrication process and device measurement of a Capacitive Micromachined Ultrasonic Transducer (CMUT) for underwater acoustic imaging. Theoretical analysis and computer simulations of the CMUT are performed. The CMUT fabrication uses the full surface micromachining techniques of the Micro Electro Mechanical System (MEMS). These techniques are Low Pressure Chemical Vapor Deposition (LPCVD), photolithography, Reactive Ion Etching System (RIE) dry etching, sacrificial layer wet etching, metal thermal evaporation coating and Plasma‐Enhanced Chemical Vapor Deposition (PECVD). Several important issues regarding fabrication are discussed. The measured input impedance of the CMUT is in agreement with the theoretical prediction. The received signal has a 35 dB signal‐to‐noise ratio indicating that practical applications of the immersion CMUT are feasible and that the radiation pattern measurement of the CMUT array has good beamforming characteristics for underwater imaging.

[1]  A. Atalar,et al.  A fast method of calculating diffraction loss between two facing transducers , 1988, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[2]  Riccardo Carotenuto,et al.  Micromachined ultrasonic transducers using silicon nitride membrane fabricated in PECVD technology , 2000, 2000 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.00CH37121).

[3]  I. Ladabaum,et al.  Theory and analysis of electrode size optimization for capacitive microfabricated ultrasonic transducers , 1999, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[4]  M. Pappalardo,et al.  One-dimensional capacitative micromachined ultrasonic transducer arrays for echographic probes , 2004 .

[5]  K. Kirk Shung,et al.  Ultrasonic transducers and arrays , 1996 .

[6]  F. Foster,et al.  Fabrication and characterization of transducer elements in two-dimensional arrays for medical ultrasound imaging , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[7]  B.T. Khuri-Yakub,et al.  Phased subarray processing for underwater 3D acoustic imaging , 2002, OCEANS '02 MTS/IEEE.

[8]  Christofer Hierold,et al.  Surface micromachined ultrasound transducers in CMOS technology , 1996, 1996 IEEE Ultrasonics Symposium. Proceedings.

[9]  Kevin Warner,et al.  NOISE REDUCTION IN ULTRASONIC GAS FLOW MEASUREMENT , 1999 .

[10]  W. P. Mason.  Electromechanical transducers and wave filters , 1942 .

[11]  I. Ladabaum,et al.  Micromachined capacitive transducer arrays for medical ultrasound imaging , 1998, 1998 IEEE Ultrasonics Symposium. Proceedings (Cat. No. 98CH36102).

[12]  Lawrence E. Kinsler,et al.  Fundamentals of acoustics , 1950 .

[13]  Josef Binder,et al.  Capacitive micromachined ultrasonic transducers and their application , 2001, 2001 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.01CH37263).

[14]  Paul Muralt,et al.  Optimization of the fabrication of sealed capacitive transducers using surface micromachining , 2004 .

[15]  David A. Hutchins,et al.  Capacitive and piezoelectric air-coupled transducers for resonant ultrasonic inspection , 1996 .

[17]  L. Parrini.  Design of advanced ultrasonic transducers for welding devices , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[18]  B. Khuri-Yakub,et al.  Surface micromachined capacitive ultrasonic transducers , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.