Optimisation of local in-plane constraining forces in double diaphragm forming

Rigid blocks (risers) were introduced in the double diaphragm forming (DDF) process to change the local in-plane strain distribution in the diaphragms, aimed at reducing wrinkling defects in the production of fabric preforms. A two-step optimisation method was developed to determine the position and dimension of each riser. In Step I, optimisation of the riser position was conducted using a simplified finite element (FE) model coupled with a genetic algorithm (GA). The height of each riser was optimised in Step II using a detailed FE model with the optimised riser positions from Step I. For demonstration, a hemisphere preform was manufactured by DDF using the optimum riser arrangement established by the optimisation routine. Results indicate that the optimum riser pattern (shape and position relative to the component boundary) can dramatically improve the preform quality through reduction of out-of-plane wrinkles, validating the feasibility of the two-step routine.

[1]  Sp.G. Pantelakis,et al.  Optimization of the diaphragm forming process with regard to product quality and cost , 2002 .

[2]  A. K. Pickett,et al.  Meso-modelling of Non-Crimp Fabric composites for coupled drape and failure analysis , 2006 .

[3]  D. Bhattacharyya,et al.  A direct comparison of matched-die versus diaphragm forming , 1998 .

[4]  S. Allaoui,et al.  Characterization of the dynamic friction of woven fabrics: Experimental methods and benchmark results , 2014 .

[5]  Klaus Wolf,et al.  Forming optimisation embedded in a CAE chain to assess and enhance the structural performance of composite components , 2018 .

[6]  G. N. Labeas,et al.  A concept to optimize quality and cost in thermoplastic composite components applied to the production of helicopter canopies , 2009 .

[7]  M. Hojjati,et al.  Experimental and numerical investigations on formability of out-of-autoclave thermoset prepreg using a double diaphragm process , 2017 .

[8]  L. T. Harper,et al.  Inter-ply stitching optimisation of highly drapeable multi-ply preforms , 2015 .

[9]  P. Hallander,et al.  Forming induced wrinkling of composite laminates with mixed ply material properties; an experimental study , 2015 .

[10]  Tae Jin Kang,et al.  The effect of blank holder force on the stamp forming behavior of non-crimp fabric with a chain stitch , 2007 .

[11]  R. Ogden.  Large deformation isotropic elasticity – on the correlation of theory and experiment for incompressible rubberlike solids , 1972, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[12]  D. Soulat,et al.  Composites Preforms Simulations for Helicopters Parts , 2008 .

[13]  Shuai Chen.  Fabric forming simulation and process optimisation for composites , 2016 .

[14]  A. Endruweit,et al.  Double diaphragm forming simulation for complex composite structures , 2017 .

[15]  E. H. Twizell,et al.  Non-linear optimization of the material constants in Ogden's stress-deformation function for incompressinle isotropic elastic materials , 1983, The Journal of the Australian Mathematical Society. Series B. Applied Mathematics.

[16]  C. Mattei,et al.  An experimental study of mechanisms behind wrinkle development during forming of composite laminates , 2013 .

[17]  Debes Bhattacharyya,et al.  Production and evaluation of secondary composite aircraft components—a comprehensive case study , 1997 .

[18]  Ignace Verpoest,et al.  Carbon composites based on multiaxial multiply stitched preforms. Part 3: Biaxial tension, picture frame and compression tests of the preforms , 2005 .

[19]  P. Hallander,et al.  Forming induced wrinkling of composite laminates: A numerical study on wrinkling mechanisms , 2016 .

[20]  L. T. Harper,et al.  Formability optimisation of fabric preforms by controlling material draw-in through in-plane constraints , 2015 .

[21]  A. Endruweit,et al.  Defect formation during preforming of a bi-axial non-crimp fabric with a pillar stitch pattern , 2016 .

[22]  E. I. Avgoulas,et al.  Frictional behaviour of non-crimp fabrics (NCFs) in contact with a forming tool , 2018 .

[23]  Remko Akkerman,et al.  Formability analyses of uni-directional and textile reinforced thermoplastics , 2014 .

[24]  P. Harrison,et al.  Press forming a 0/90 cross-ply advanced thermoplastic composite using the double-dome benchmark geometry , 2013 .

[25]  A. E. Ehret,et al.  On a molecular statistical basis for Ogden's model of rubber elasticity , 2015 .