Heat transfer and entropy generation in air jet impingement on a model rough surface

[1]  A. Bejan.  Entropy Generation Minimization , 2016 .

[2]  A. Mukherjee,et al.  Heat transfer enhancement from a small rectangular channel with different surface protrusions by a turbulent cross flow jet , 2015 .

[3]  Jing-wei Zhou,et al.  Heat transfer characteristics of impinging jets: The influence of unsteadiness with different waveforms , 2015 .

[4]  Entropy generation and second law analysis of pulsed impinging jet , 2015 .

[5]  Adriano Sciacovelli,et al.  Entropy generation analysis as a design tool - A review , 2015 .

[6]  A. Mujumdar,et al.  Heat transfer under composite arrangement of pulsed and steady turbulent submerged multiple jets impinging on a flat surface , 2014 .

[7]  S. Çalışkan.  Flow and heat transfer characteristics of transverse perforated ribs under impingement jets , 2013 .

[8]  Di Zhang,et al.  Flow and Heat Transfer Characteristics of Single Jet Impinging on Dimpled Surface , 2013 .

[9]  A. Mujumdar,et al.  Flow and mixing characteristics of pulsed confined opposed jets in turbulent flow regime , 2013 .

[10]  Arun S. Mujumdar,et al.  Energy-efficient thermal drying using impinging-jets with time-varying heat input – A computational study , 2013 .

[11]  Sinan Caliskan,et al.  Experimental investigation of impinging jet array heat transfer from a surface with V-shaped and convergent-divergent ribs , 2012 .

[12]  Bernhard Weigand,et al.  An Experimental and Numerical Study of Heat Transfer From Arrays of Impinging Jets With Surface Ribs , 2012 .

[13]  A. Mujumdar,et al.  A Numerical Study on the Convective Heat Transfer Characteristics of Pulsed Impingement Drying , 2012 .

[14]  A. Mujumdar,et al.  A study on the heat and mass transfer properties of multiple pulsating impinging jets , 2012 .

[15]  A. Mujumdar,et al.  Numerical Modeling of Pulsed Laminar Opposed Impinging Jets , 2012 .

[16]  B. Weigand,et al.  Experimental and numerical investigation of impingement heat transfer on a flat and micro-rib roughened plate with different crossflow schemes , 2011 .

[17]  K. Parham,et al.  A numerical study of turbulent opposed impinging jets issuing from triangular nozzles with different geometries , 2011 .

[18]  Arun S. Mujumdar,et al.  Turbulent impinging jet heat transfer enhancement due to intermittent pulsation , 2010 .

[19]  B. Sagot,et al.  Enhancement of jet-to-wall heat transfer using axisymmetric grooved impinging plates , 2010 .

[20]  M. Sharif,et al.  Parametric study of turbulent slot-jet impingement heat transfer from concave cylindrical surfaces , 2010 .

[21]  H. Herwig,et al.  Unsteady jet impingement: Heat transfer on smooth and non-smooth surfaces , 2009 .

[22]  S. V. Prabhu,et al.  Heat transfer enhancement on a flat surface with axisymmetric detached ribs by normal impingement of circular air jet , 2008 .

[23]  Dae Hee Lee,et al.  Jet Impingement Cooling of Chips Equipped With Multiple Cylindrical Pedestal Fins , 2007 .

[24]  S. Mei,et al.  Measurement of detailed heat transfer along rib-roughened surface under arrays of impinging elliptic jets , 2006 .

[25]  Christopher Yap,et al.  Effects of geometric parameters on confined impinging jet heat transfer , 2005 .

[26]  H. Herwig,et al.  Entropy production calculation for turbulent shear flows and their implementation in cfd codes , 2005 .

[27]  S. Hsieh,et al.  Local heat transfer in rotating square-rib-roughened and smooth channels with jet impingement , 2004 .

[28]  Nan Gao,et al.  Heat transfer to impinging round jets with triangular tabs , 2003 .

[29]  Srinath V. Ekkad,et al.  Jet impingement heat transfer on dimpled target surfaces , 2002 .

[30]  B. Sundén,et al.  Impingement cooling in a rib-roughened channel with cross-flow , 2001 .

[31]  Chie Gau,et al.  Flow and impingement cooling heat transfer along triangular rib-roughened walls , 2000 .

[32]  C. Patel,et al.  Effects of surface roughness on the average heat transfer of an impinging air jet , 2000 .

[33]  Local convective heat transfer to submerged pulsating jets , 1997 .

[34]  Adrian Bejan,et al.  Method of entropy generation minimization, or modeling and optimization based on combined heat transfer and thermodynamics , 1996 .

[35]  J. Lienhard,et al.  Wall Roughness Effects on Stagnation-Point Heat Transfer Beneath an Impinging Liquid Jet , 1994 .

[36]  M. Aziz,et al.  Convective Heat Transfer Enhancement Due to Intermittency in an Impinging Jet , 1993 .

[37]  S. Polat,et al.  HEAT AND MASS TRANSFER IN IMPINGEMENT DRYING , 1993 .

[38]  H. Martin.  Heat and Mass Transfer between Impinging Gas Jets and Solid Surfaces , 1977 .

[39]  Robert E. Wilson,et al.  Fundamentals of momentum, heat, and mass transfer , 1969 .