Non-contact start/stop motion control of HDD suspension using shape memory alloy actuators

In hard disk drives (HDD), an important issue related to increased storage density is the tribological problem of the head/disk interface. The conventional head gimbal assembly (HGA) of the HDD is used in a contact start/stop mode which results in wear particles and debris. This may cause a serious problem for the read/write function. In this paper, we propose a new type of suspension featuring a shape memory alloy (SMA) actuator in order to prevent friction between the head (slider) and disk. As a first step, a finite element analysis is undertaken to investigate modal characteristics of the proposed HGA. Using the principal modal parameters, such as natural frequency, a control system model is established and a sliding mode control algorithm to achieve a non-contact start/stop (non-CSS) mode is formulated. The key control principle for accomplishing the non-CSS mode is that the control input is to be employed in the SMA actuator before the disk rotates, and is disconnected when the angular velocity of the disk is fully developed to achieve a certain flying height. In order to demonstrate the effectiveness of the proposed control system, a conventional HGA is modified to integrate the SMA actuator. The control algorithm is experimentally realized and controlled motions for the non-CSS mode are presented in the time domain.

[1]  Seung-Bok Choi,et al.  Moving Sliding Surfaces for Fast Tracking Control of Second-Order Dynamical Systems , 1994 .

[2]  Norio Tagawa,et al.  Development of a new sub-sub micron flying ramp-loading head with emphasis on slider roll control capability , 1992 .

[3]  David B. Bogy,et al.  Unloaded slider vibrations excited by air flow between slider and rotating disk , 1992, 1992. Digests of Intermag. International Magnetics Conference.

[4]  D.B. Bogy,et al.  Two calibration methods of AE measurement channels for head-disk contact detection , 1999, IEEE International Magnetics Conference.

[5]  Seung-Bok Choi,et al.  Sliding mode control of vibration in a single-link flexible arm with parameter variations , 1995 .

[6]  David B. Bogy,et al.  Slider air bearing designs for load/unload applications , 1999 .

[7]  Norio Tagawa,et al.  Self-Loading Slider Dynamics for Noncontact Start Stop Operation With Negative Pressure Air-Lubricated Slider Bearing in Magnetic Disk Storage , 1989 .

[8]  D. Bogy,et al.  Dynamics of the unload process for negative pressure sliders , 1999 .

[9]  Seung-Bok Choi,et al.  Structural vibration control using shape memory actuators , 2000 .

[10]  Norio Tagawa,et al.  Dynamic loading criteria for 3-1/2 inch inline HDD using multilayer piezoelectric load/unload mechanism , 1991 .

[11]  Frank E. Talke,et al.  Effect O F Ramp Profile And Spindle Speed On Head-disk Contact During Rotary Load/unload , 1993 .

[12]  David B. Bogy,et al.  Measurements of slider-disk contacts during dynamic load-unload , 1991 .

[13]  D. Bogy,et al.  Effects of certain design parameters on load/unload performance [disk drives] , 2000 .

[14]  Seung-Bok Choi,et al.  VIBRATION CONTROL OF A FLEXIBLE BEAM USING SHAPE MEMORY ALLOY ACTUATORS , 1996 .