Aluminum doped zinc oxide (AZO) coated optical fiber LMR refractometers—An experimental demonstration

Abstract This work presents the experimental demonstration of lossy mode resonance generation by means of aluminum doped zinc oxide thin-films. The use of such material may allow to optimize the performance of LMR-based sensors, obtaining good sensitivity at lower costs than other overlays, such as those including indium. The refractometric response of the fabricated devices is explored in different spectral regions. One refractometer working in the near infrared region was fabricated, obtaining a sensitivity of 2280 nm/RIU. A second refractometer working in the visible light spectrum was also fabricated. This second device allows to observe rough refractive index variations with the naked eye as a change of the color of the light propagating through the fiber, simplifying the setup needed for its use.

[1]  Tadatsugu Minami,et al.  Present status of transparent conducting oxide thin-film development for Indium-Tin-Oxide (ITO) substitutes , 2008 .

[2]  Pablo Zubiate,et al.  Is there a frontier in sensitivity with Lossy mode resonance (LMR) based refractometers? , 2017, Scientific Reports.

[3]  Simon J. Henley,et al.  The growth of transparent conducting ZnO films by pulsed laser ablation , 2004 .

[4]  Miss A.O. Penney.  (b) , 1974, The New Yale Book of Quotations.

[5]  F. Arregui,et al.  Experimental demonstration of lossy mode resonance generation for transverse-magnetic and transverse-electric polarizations. , 2013, Optics letters.

[6]  Jooho Moon,et al.  Effect of metal (Al, Ga, and In)-dopants and/or Ag-nanoparticles on the optical and electrical properties of ZnO thin films , 2006 .

[7]  Joseph John,et al.  Sensitivity Enhancement of Aluminium Doped Zinc Oxide (AZO) Coated Lossy Mode Resonance (LMR) Fiber Optic Sensors Using Additional Layer of Oxides , 2014 .

[8]  Carlos Fernández-Valdivielso,et al.  Design rules for lossy mode resonance based sensors. , 2012, Applied optics.

[9]  J. John,et al.  Theoretical modeling and investigations of AZO coated LMR based fiber optic tapered tip sensor utilizing an additional TiO2 layer for sensitivity enhancement , 2017 .

[10]  Wei Cheng Chen,et al.  Formaldehyde sensing characteristics of an aluminum-doped zinc oxide (AZO) thin-film-based sensor , 2018 .

[11]  M. Hernaez,et al.  Lossy Mode Resonance Generation With Indium-Tin-Oxide-Coated Optical Fibers for Sensing Applications , 2010, Journal of Lightwave Technology.

[12]  Nerea De Acha,et al.  Optical sensors based on lossy-mode resonances , 2017 .

[13]  J. Homola,et al.  Surface plasmon resonance (SPR) sensors: approaching their limits? , 2009, Optics express.

[14]  Francisco J. Arregui,et al.  Optical fiber pH sensor based on lossy-mode resonances by means of thin polymeric coatings , 2011 .

[15]  Min-Hsiung Hon,et al.  The effects of thickness and operation temperature on ZnO:Al thin film CO gas sensor , 2002 .

[16]  Orlando Frazão,et al.  Review of fiber-optic pressure sensors for biomedical and biomechanical applications , 2013, Journal of biomedical optics.

[17]  Byoungho Lee,et al.  Current status of micro- and nano-structured optical fiber sensors , 2009 .

[18]  M. Hernáez,et al.  Sensing properties of ITO coated optical fibers to diverse VOCs , 2010 .

[19]  António Barrias,et al.  A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications , 2016, Sensors.

[20]  J. John,et al.  Lossy Mode Resonance (LMR) Based Fiber Optic Sensors: A Review , 2015, IEEE Sensors Journal.

[21]  F. Arregui,et al.  High sensitive and selective C-reactive protein detection by means of lossy mode resonance based optical fiber devices. , 2017, Biosensors & bioelectronics.

[22]  Chao Yang,et al.  Preparation and properties of AZO thin films on different substrates , 2010 .