A metrological device for robot identification

[1]  Stéphane Caro,et al.  Joint stiffness identification of six-revolute industrial serial robots , 2011 .

[2]  Michael Ruderman,et al.  Modeling and Identification of Elastic Robot Joints With Hysteresis and Backlash , 2009, IEEE Transactions on Industrial Electronics.

[3]  Kevin L. Conrad,et al.  On the Accuracy, Repeatability, and Degree of Influence of Kinematics Parameters for Industrial Robots , 2002 .

[4]  Ilian A. Bonev,et al.  Optimal Experiment Design for Elasto-Geometrical Calibration of Industrial Robots , 2019, IEEE/ASME Transactions on Mechatronics.

[5]  Damien Chablat,et al.  Stiffness modeling of robotic manipulator with gravity compensator , 2013, ArXiv.

[6]  Andreas Archenti,et al.  Closed-force-loop elastostatic calibration of serial articulated robots , 2019, Robotics and Computer-Integrated Manufacturing.

[7]  Alexandr Klimchik,et al.  Robotic manipulators with double encoders: accuracy improvement based on advanced stiffness modeling and intelligent control , 2018 .

[8]  Andreas Archenti,et al.  A new method for circular testing of machine tools under loaded condition , 2012 .

[9]  J.P. Desai,et al.  Modeling and control of the Mitsubishi PA-10 robot arm harmonic drive system , 2005, IEEE/ASME Transactions on Mechatronics.

[10]  Ilian A. Bonev,et al.  Comparison of two calibration methods for a small industrial robot based on an optical CMM and a laser tracker , 2013, Robotica.

[11]  Peter I. Corke,et al.  A robotics toolbox for MATLAB , 1996, IEEE Robotics Autom. Mag..

[12]  Ilian A. Bonev,et al.  Absolute robot calibration with a single telescoping ballbar , 2014 .

[13]  Stéphane Caro,et al.  Optimal measurement pose selection for joint stiffness identification of an industrial robot mounted on a rail , 2014, 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[14]  Benoît Furet,et al.  New method for decoupling the articular stiffness identification: Application to an industrial robot with double encoding system on its 3 first axis , 2017, 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[15]  Stéphane Caro,et al.  Geometric calibration of industrial robots using enhanced partial pose measurements and design of experiments , 2015 .

[16]  Alexandr Klimchik,et al.  Efficiency evaluation of robots in machining applications using industrial performance measure , 2017 .

[17]  Benoît Furet,et al.  Joint stiffness identification of industrial serial robots , 2011, Robotica.

[18]  Ilian A. Bonev,et al.  Robot calibration using a portable photogrammetry system , 2018 .