The use of CAD/CAM technology to fabricate a custom ceramic implant abutment: a clinical report.

[1]  J. A. Arioli Filho,et al.  Influence of three types of abutments on preload values before and after cyclic loading with structural analysis by scanning electron microscopy. , 2013, The International journal of oral & maxillofacial implants.

[2]  M. Chiapasco,et al.  Zirconia and titanium implant abutments for single-tooth implant prostheses after 5 years of function in posterior regions. , 2013, The International journal of oral & maxillofacial implants.

[3]  Won-Gun Chang,et al.  The fabrication of a CAD/CAM ceramic crown to fit an existing partial removable dental prosthesis: a clinical report. , 2012, The Journal of prosthetic dentistry.

[4]  Van P Thompson,et al.  Marginal accuracy of three implant-ceramic abutment configurations. , 2012, The International journal of oral & maxillofacial implants.

[5]  M. Wichmann,et al.  Passivity of fit of CAD/CAM and copy-milled frameworks, veneered frameworks, and anatomically contoured, zirconia ceramic, implant-supported fixed prostheses. , 2012, The Journal of prosthetic dentistry.

[6]  M. Schmitter,et al.  Minimally invasive lithium disilicate ceramic veneers fabricated using chairside CAD/CAM: a clinical report. , 2012, The Journal of prosthetic dentistry.

[7]  Michael E Razzoog,et al.  Maxillary implant-supported bar overdenture and mandibular implant-retained fixed denture using CAD/CAM technology and 3-D design software: a clinical report. , 2011, The Journal of prosthetic dentistry.

[8]  E. Romeo,et al.  Influence of abutment material on the gingival color of implant-supported all-ceramic restorations: a prospective multicenter study. , 2011, Clinical oral implants research.

[9]  Alain Vanheusden,et al.  Fit of single tooth zirconia copings: comparison between various manufacturing processes. , 2011, The Journal of prosthetic dentistry.

[10]  U. Belser,et al.  The use of polytetrafluoroethylene tape for the management of screw access channels in implant-supported prostheses. , 2010, The Journal of prosthetic dentistry.

[11]  Gerry M Raghoebar,et al.  Immediate loading and customized restoration of a single implant in the maxillary esthetic zone: a clinical report. , 2009, The Journal of prosthetic dentistry.

[12]  W. Johnston,et al.  Effects of implant design and surface roughness on crestal bone and soft tissue levels in the esthetic zone. , 2009, The International journal of oral & maxillofacial implants.

[13]  K. Tan,et al.  Load fatigue performance of implant-ceramic abutment combinations. , 2009, The International journal of oral & maxillofacial implants.

[14]  J. D. Brewer,et al.  Comparison of fracture resistance of pressable metal ceramic custom implant abutments with CAD/CAM commercially fabricated zirconia implant abutments. , 2009, The Journal of prosthetic dentistry.

[15]  M. Kern,et al.  Retention of zirconia ceramic copings bonded to titanium abutments. , 2007, The International journal of oral & maxillofacial implants.

[16]  C. Ercoli,et al.  Measurement of the rotational misfit and implant-abutment gap of all-ceramic abutments. , 2007, The International journal of oral & maxillofacial implants.

[17]  Peter Ottl,et al.  A clinical report and overview of scientific studies and clinical procedures conducted on the 3M ESPE Lava All-Ceramic System. , 2005, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[18]  G. Quinn,et al.  Fracture toughness (KIc) of a dental porcelain determined by fractographic analysis. , 1999, Dental materials : official publication of the Academy of Dental Materials.

[19]  H. Spielman.  Influence of the implant position on the aesthetics of the restoration. , 1996, Practical periodontics and aesthetic dentistry : PPAD.

[20]  E. McGlumphy,et al.  The combination implant crown: a cement- and screw-retained restoration. , 1992, Compendium.