A simple charge sensitive preamplifiers for experiments with a small number of detector channels

We present a Charge Sensitive Preamplifiers, CSP, based on a very simple design. The CSP consists of an input transistor and a Differential Amplifier, DA, in the second stage. The circuit does not make use of a cascode connection to load the input transistor, to minimize the supply voltage, with a consequent reduction of power dissipation. In addition, only two active devices, a transistor and an Operational Amplifier, are needed where discrete components are used. By exploiting both the inputs of the DA and thanks to a simple resistive network used to load the input transistor, stability, noise and dynamic performances can be met applying a few very simple mathematical rules.

[1]  Lorenzo Fabris,et al.  A fast, compact solution for low noise charge preamplifiers , 1998 .

[2]  Holger Vogt,et al.  JFET-PMOS technology, in the design of monolithic preamplifier systems for multielectrode detectors , 1991 .

[3]  Gábor Kalinka,et al.  Realization of charge sensitive preamplifiers using current feedback operational amplifier , 1995 .

[4]  Antonio Francesco Longoni,et al.  Integrated HEMT-based charge amplifier-design and experiment , 2001 .

[5]  V. Radeka Signal, Noise and Resolution in Position-Sensitive Detectors , 1974 .

[6]  P. F. Manfredi,et al.  Optimization of front-end design in imaging and spectrometry applications with room temperature semiconductor detectors , 2001 .

[7]  P. F. Manfredi,et al.  Signal Coupling from a Semiconductor Detector to a Cold Resistance Preamplifier Through a Cable or a Delay - Line Transformer , 1978, IEEE Transactions on Nuclear Science.

[8]  Terry L. Mayhugh,et al.  A Fast Low-Noise Charge Preamplifier , 1977, IEEE Transactions on Nuclear Science.

[9]  T. Zimmerman,et al.  Design and characterization of the BVX: an 8-channel CMOS preamplifier-shaper for silicon strips , 1992 .

[10]  Andrea Baschirotto,et al.  A radiation hard bipolar monolithic front-end readout , 1999 .

[11]  G. Boella,et al.  A charge sensitive preamplifier made with SiGe bipolar transistors , 2004 .

[12]  G. Pessina,et al.  A very simple method to measure the input capacitance and the input current of transistors , 2001 .

[13]  M. Porro,et al.  A CMOS Readout Circuit for Silicon Drift Detectors With on-Clip JFET and Feedback Capacitor , 2006, IEEE Transactions on Nuclear Science.

[14]  V. Speziali,et al.  Monolithic junction field-effect transistor charge preamplifier for calorimetry at high luminosity hadron colliders , 1991, Conference Record of the 1991 IEEE Nuclear Science Symposium and Medical Imaging Conference.

[15]  G. Pessina,et al.  Improvements in dynamic and noise performance of cryogenic GaAs monolithic ASICs , 1996 .

[16]  G. De Geronimo,et al.  MOSFET optimization in deep submicron technology for charge amplifiers , 2005, IEEE Transactions on Nuclear Science.