Investigation on fretting wear mechanism of 316 stainless steel induced by Ni dissolution during pre-immersion corrosion in the liquid lead-bismuth eutectic (LBE)

[1]  W. Tan,et al.  Effect of the third body layer formed at different temperature on fretting wear behavior of 316 stainless steel in the composite fretting motion of slip and impact , 2022, Wear.

[2]  H. Kou,et al.  Dependence of fretting wear on the microstructure characteristics and impact on the subsurface stability of a metastable β titanium alloy , 2022, Tribology International.

[3]  S. Qu,et al.  Effect of ultrasonic nanocrystalline surface modification process on fretting wear behavior of laser surface textured 20CrMoH steel , 2021, Surface and Coatings Technology.

[4]  S. Fouvry,et al.  Modeling contact size effect on fretting wear: A combined contact oxygenation - Third body approach , 2021, Wear.

[5]  C. Hyde,et al.  A Computationally Efficient Method for the Prediction of Fretting Wear in Practical Engineering Applications , 2021, Tribology International.

[6]  M. Yurechko,et al.  Creep of 316L austenitic steel at 450-550°C in static lead-bismuth eutectic covered by argon-hydrogen gas , 2021, Journal of Nuclear Materials.

[7]  D. Duan,et al.  Effect of groove surface texture on the fretting wear of Ti–6Al–4V alloy , 2021 .

[8]  X. Shao,et al.  Evolution of wear damage in 690 alloy tube mated with 405 stainless steel plate due to fretting conditions , 2021 .

[9]  Xiaotao Zheng,et al.  Review on sodium corrosion evolution of nuclear-grade 316 stainless steel for sodium-cooled fast reactor applications , 2021 .

[10]  H. Shang,et al.  Fretting wear evolution of γ-TiAl alloy , 2021 .

[11]  B. Shen,et al.  Multiscale analysis of friction behavior at fretting interfaces , 2021 .

[12]  Xiaoyu Zhang,et al.  An experimental investigation on fretting wear behavior of copper–magnesium alloy , 2020 .

[13]  Peng Wang,et al.  Fretting wear behaviors of Zr-4 alloy under different ions irradiation conditions , 2020 .

[14]  Gaoqi Wang,et al.  Fretting wear and mechanical properties of surface-nanostructural titanium alloy bone plate , 2020 .

[15]  Minhao Zhu,et al.  A review of fretting study on nuclear power equipment , 2020 .

[16]  Y. Lei,et al.  Corrosion behavior of 410 stainless steel in flowing lead-bismuth eutectic alloy at 550 °C , 2019, Journal of Nuclear Materials.

[17]  W. Gan,et al.  Hot deformation behavior originated from dislocation activity and β to α phase transformation in a metastable β titanium alloy , 2019, International Journal of Plasticity.

[18]  A. Yawny,et al.  Running condition and material response fretting maps of incoloy 800 steam generator tubes against AISI 304L pads in air and room temperature , 2019, Tribology International.

[19]  Q. Liu,et al.  Interactions between dislocations and three-dimensional annealing twins in face centered cubic metals , 2019, Computational Materials Science.

[20]  T. Van der Donck,et al.  Effect of deformation twinning on dissolution corrosion of 316L stainless steels in contact with static liquid lead-bismuth eutectic (LBE) at 500 °C , 2018, Journal of Nuclear Materials.

[21]  S. Niezgoda,et al.  Influence of deformation induced nanoscale twinning and FCC-HCP transformation on hardening and texture development in medium-entropy CrCoNi alloy , 2018, Acta Materialia.

[22]  Preet M. Singh,et al.  Fretting wear comparison of cladding materials for reactor fuel cladding application , 2018, Journal of Nuclear Materials.

[23]  Shao-Shi Rui,et al.  EBSD analysis of cyclic load effect on final misorientation distribution of post-mortem low alloy steel: A new method for fatigue crack tip driving force prediction , 2018, International Journal of Fatigue.

[24]  Le-fu Zhang,et al.  Fretting wear of alloy 690 tube mated with different materials in high temperature water , 2018 .

[25]  Le-fu Zhang,et al.  Effects of sliding amplitude and normal load on the fretting wear behavior of alloy 690 tube exposed to high temperature water , 2017 .

[26]  Z. H. Wang,et al.  The degradation mechanism of Inconel 690TT induced by fretting wear in air , 2017 .

[27]  Minhao Zhu,et al.  Impact-fretting wear behavior of Inconel 690 alloy tubes effected by pre-compressive stress , 2017 .

[28]  Yujin Hu,et al.  Effect of surface machining on the corrosion behaviour of 316 austenitic stainless steel in simulated PWR water , 2017 .

[29]  Minhao Zhu,et al.  Impact fretting wear of Inconel 690 tube with different supporting structure under cycling low kinetic energy , 2017 .

[30]  Yan Zhou,et al.  Study on dual rotary fretting wear behavior of Ti6Al4V titanium alloy , 2017 .

[31]  E. Rigaud,et al.  An energy approach for impact wear in water environment , 2017 .

[32]  Yonghao Lu,et al.  Effect of normal force on fretting wear behavior and mechanism of Alloy 690TT in high temperature water , 2016 .

[33]  Ali Zaoui,et al.  Mechanical properties of magnetite (Fe3O4), hematite (α-Fe2O3) and goethite (α-FeO*OH) by instrumented indentation and molecular dynamics analysis , 2011 .

[34]  L. Martinelli,et al.  Dissolution mechanism of 316L in lead–bismuth eutectic at 500 °C , 2011 .

[35]  S. Fouvry,et al.  Effect of variable normal force and frequency on fretting wear response of Ti–6Al–4V contact , 2011 .

[36]  Yves Berthier,et al.  Wear modeling and the third body concept , 2007 .

[37]  M. Helmi Attia,et al.  Fretting fatigue and wear damage of structural components in nuclear power stations—Fitness for service and life management perspective , 2006 .

[38]  M. Attia.  Fretting wear of Zr-alloy pressure tubes under the combined effects of in-plane and out-of-plane flow-induced vibrations , 2005 .

[39]  Sm Hong,et al.  Impact fretting wear of alloy 690 tubes at 25 °C and 290 °C , 2005 .

[40]  G. Benamati,et al.  Corrosion behaviour of steels and refractory metals in flowing Lead-Bismuth Eutectic at low oxygen activity , 2005 .

[41]  M. Niinomi,et al.  Effect of microstructure on fretting fatigue and sliding wear of highly workable titanium alloy, Ti–4.5Al–3V–2Mo–2Fe , 2004 .

[42]  Hyung-Kyu Kim,et al.  Influence of contact shape and supporting condition on tube fretting wear , 2003 .

[43]  N. J. Fisher,et al.  Steam Generator Fretting-Wear Damage: A Summary of Recent Findings , 1999 .

[44]  M. H. Attia,et al.  Experimental investigation of long-term fretting wear of multi-span steam generator tubes with U-bend sections , 1999 .

[45]  Minhao Zhu,et al.  Impact fretting wear behavior of 304 stainless steel thin-walled tubes under low-velocity , 2017 .

[46]  L. Jian.  Tribological Properties of AlCoCrFeNiCu High Entropy Alloy in Hydrogen Peroxide , 2011 .