A Smart Autonomous WPT System for Electric Wheelchair Applications With Free-Positioning Charging Feature

Electric wheelchairs (EWs) are gradually replacing conventional wheelchairs as an assistive tool for people with disabilities who are unable to use the physical force to drive manual wheelchairs on their own. EW charging requires manipulating, plugging in, and unplugging an off-board charger, which can be challenging or impossible for people with severe disabilities. In this paper, a comprehensive solution to the problem of EW recharging is provided in the form of a smart, autonomous charging system, based on the wireless power transfer (WPT) technology. In this paper, a sufficiently large area of 0.75 m2 for a floor-charging pad involving multiple primary coils has been implemented while offering a free-positioning charging feature. A novel design methodology for primary and secondary charging pads’ optimization has been developed, taking into account various complex real-life constraints. In addition, a novel 250-W WPT controller design has been employed to maximize misalignment tolerance up to 7 cm while maintaining high system efficiency. In this paper, a novel, comprehensive, system-level organization of a master controller design has been presented which manages continuous coordination between the WPT controllers and the autonomous docking controller, records important system data, maintains safe operation of overall system, and prevents hazardous exposure to potentially harmful magnetic field beyond $15~\mu \text{T}$ . In addition, a novel design methodology for primary and secondary charging pads’ optimization has been developed, which takes into account various real-life constraints, and provides a fair comparison between different designs in a multivariable environment. The proposed design is tested in laboratory conditions and later validated in a practical environment.

[1]  Reilly Jp.  Comments concerning "Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz)". , 1999 .

[2]  M. Takamiya,et al.  Positioning-Free Resonant Wireless Power Transmission Sheet With Staggered Repeater Coil Array (SRCA) , 2012, IEEE Antennas and Wireless Propagation Letters.

[3]  Li Lijuan,et al.  Application of wireless energy transfer based on BCI to the power system of intelligent wheelchair , 2010, 2010 International Conference on Networking and Digital Society.

[4]  S. Mathar,et al.  Standard Proposal for Resonant Inductive Charging of Electric Vehicles , 2012 .

[5]  Zeljko Pantic,et al.  Design of Hybrid Energy Storage Systems for Wirelessly Charged Electric Vehicles , 2015, 2015 IEEE 82nd Vehicular Technology Conference (VTC2015-Fall).

[6]  Tae-Gyung Kang,et al.  Mobility Device Use in the United States , 2003 .

[7]  Zion Tsz Ho Tse,et al.  A Uniform Voltage Gain Control for Alignment Robustness in Wireless EV Charging , 2015 .

[8]  C. Dean,et al.  Development of a foreign object detection and analysis method for wireless power systems , 2011, 2011 IEEE Symposium on Product Compliance Engineering Proceedings.

[9]  K. Fotopoulou,et al.  Wireless Power Transfer in Loosely Coupled Links: Coil Misalignment Model , 2011, IEEE Transactions on Magnetics.

[10]  B. Fleming.  Electric Vehicle Collaboration¿Toyota Motor Corporation and Tesla Motors [Automotive Electronics] , 2013 .

[11]  William Yerazunis,et al.  Wireless Power Transfer: Metamaterials and Array of Coupled Resonators , 2013, Proceedings of the IEEE.

[12]  K. Jokela,et al.  ICNIRP Guidelines GUIDELINES FOR LIMITING EXPOSURE TO TIME-VARYING , 1998 .

[13]  José Francisco Sanz Osorio,et al.  High-Misalignment Tolerant Compensation Topology For ICPT Systems , 2012, IEEE Transactions on Industrial Electronics.

[14]  Zeljko Pantic,et al.  Analysis, Design, and Demonstration of a 25-kW Dynamic Wireless Charging System for Roadway Electric Vehicles , 2018, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[15]  J. Muhlethaler,et al.  Modeling and multi-objective optimization of inductive power components , 2012 .

[16]  Rory A Cooper,et al.  Joystick control for powered mobility: current state of technology and future directions. , 2010, Physical medicine and rehabilitation clinics of North America.

[17]  Grant A. Covic,et al.  Detection of EVs on IPT Highways , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[18]  S.Y.R. Hui,et al.  A new generation of universal contactless Battery Charging platform for portable Consumer Electronic equipment , 2004, IEEE Transactions on Power Electronics.

[19]  Jiseong Kim,et al.  Shielded coil structure suppressing leakage magnetic field from 100W-class wireless power transfer system with higher efficiency , 2012, 2012 IEEE MTT-S International Microwave Workshop Series on Innovative Wireless Power Transmission: Technologies, Systems, and Applications.

[20]  M. Brault.  Americans with Disabilities: 2010 , 2012 .

[21]  M E Buning,et al.  Occupational performance and the transition to powered mobility: a pilot study. , 2001, The American journal of occupational therapy : official publication of the American Occupational Therapy Association.

[22]  Grant Covic,et al.  Inductive Power Transfer , 2013, Proceedings of the IEEE.