Characterization of multi-walled carbon nanotube/phenylethynyl terminated polyimide composites

Abstract Multi-walled carbon nanotubes (MW-CNTs) were dispersed throughout a thermosetting polyimide Triple A PI (TriA-PI). TriA-PI is a newly developed phenylethynyl terminated polyimide, and exhibits excellent mechanical properties and processability with high glass transition temperature (T g >300 °C ). The resulting composites containing 3.3, 7.7, 14.3 wt% MW-CNT exhibited relatively good dispersion in macroscopic scale. Tensile tests on the composites showed an increase in the elastic modulus and the yield strength, and decrease in the failure strain. Dynamic mechanical analysis (DMA) showed an increase in the glass transition temperature with incorporation of the carbon nanotubes. The experimental results suggested that the carbon nanotubes are acting as macroscopic crosslinks, and are further immobilizing the polyimide chains at elevated temperature.

[1]  Peter Beighton,et al.  de la Chapelle, A. , 1997 .

[2]  G. A. D. Briggs,et al.  Elastic and shear moduli of single-walled carbon nanotube ropes , 1999 .

[3]  Bingqing Wei,et al.  Study on poly(methyl methacrylate)/carbon nanotube composites , 1999 .

[4]  Masatoshi Hasegawa,et al.  Molecular Design of Heat Resistant Polyimides Having Excellent Processability and High Glass Transition Temperature , 2001 .

[5]  C. A. Bernardo,et al.  Transport properties of polymer-vapour grown carbon fibre composites , 2000 .

[6]  Elizabeth C. Dickey,et al.  Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites , 2000 .

[7]  Hui-Ming Cheng,et al.  Mechanical and electrical properties of a MWNT/epoxy composite , 2002 .

[8]  Serge Lefrant,et al.  Characterization of singlewalled carbon nanotubes-PMMA composites , 2000 .

[9]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[10]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[11]  R. Ruoff,et al.  Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties , 2000, Physical review letters.

[12]  Joerg Mayer,et al.  Distribution and alignment of carbon nanotubes and nanofibrils in a polymer matrix , 2002 .

[13]  K. Miyagawa,et al.  Processing and properties of carbon fiber reinforced triple-A polyimide (Tri-A PI) matrix composites , 2002 .

[14]  T. Chou,et al.  Advances in the science and technology of carbon nanotubes and their composites: a review , 2001 .

[15]  Philipp Werner,et al.  Carbon-nanofibre-reinforced poly(ether ether ketone) composites , 2002 .

[16]  Joseph G. Smith,et al.  Chemistry and properties of imide oligomers end-capped with phenylethynylphthalic anhydrides , 1994 .