Potential of Pyrogenic Nanosilica to Enhance the Service Life of Concrete

[1]  P. Akpınar,et al.  A case study for exploring the alkali-aggregate reactivity of Cyprus aggregates , 2022, Case Studies in Construction Materials.

[2]  N. Vatin,et al.  Improvement in Durability and Mechanical Performance of Concrete Exposed to Aggressive Environments by Using Polymer , 2022, Materials.

[3]  F. Saeed,et al.  Recycling of Waste Facial Masks as a Construction Material, a Step towards Sustainability , 2022, Materials.

[4]  S. Praveenkumar,et al.  Influence of Nano Silica on Fresh and Hardened Properties of Cement-based Materials – A Review , 2022, Silicon.

[5]  R. Al-Rousan.  Cyclic Behavior of Alkali-Silica Reaction-Damaged Reinforced Concrete Beam-Column Joints Strengthened with FRP Composites , 2022, Case Studies in Construction Materials.

[6]  Prem Pal Bansal,et al.  A comprehensive review on effects of mineral admixtures and fibers on engineering properties of ultra-high-performance concrete , 2021, Journal of Building Engineering.

[7]  S. Chithra,et al.  Investigation on the Properties of Sustainable Steel Fiber Reinforced Reactive Powder Concrete by Utilization of Coir Pith Aggregates and Pyrogenic Silica , 2021, Silicon.

[8]  K. Liew,et al.  Multicriteria performance evaluation of fiber-reinforced cement composites: An environmental perspective , 2021 .

[9]  M. Idrees,et al.  Hydration behavior of calcium aluminate cement mortars with mineral admixtures at different curing temperatures , 2021 .

[10]  P. Hou,et al.  Effects of nanosilica on the hydration and hardening properties of slag cement , 2021 .

[11]  Waiching Tang,et al.  Effects of nano silica on the properties of cement-based materials: A comprehensive review , 2021 .

[12]  J. Brito,et al.  Rheology, Hydration, and Microstructure of Portland Cement Pastes Produced with Ground Açaí Fibers , 2021, Applied Sciences.

[13]  F. Saeed,et al.  Improvement in compressive strength of Styrene-Butadiene-Rubber (SBR) modified mortars by using powder form and nanoparticles , 2021 .

[14]  Abdullah Almakrab,et al.  Alkali-silica reaction (ASR) in concrete structures: Mechanisms, effects and evaluation test methods adopted in the United States , 2021 .

[15]  Muhammad Shafique,et al.  Sugarcane bagasse ash-based engineered geopolymer mortar incorporating propylene fibers , 2021 .

[16]  J. Costa,et al.  Durability of coating mortars containing açaí fibers , 2020 .

[17]  F. Saeed,et al.  Effectiveness of metakaolin and hybrid polymers incorporated mortar for the compressive strength and acid resistance of industrial and wastewater infrastructure , 2020, Environmental Progress & Sustainable Energy.

[18]  Jesse Zhu,et al.  Investigation of the Performance of Fumed Silica as Flow Additive in Polyester Powder Coatings , 2020, Coatings.

[19]  K. M. Liew,et al.  Influence of elevated temperature on the microstructure and mechanical performance of cement composites reinforced with recycled carbon fibers , 2020 .

[20]  Arslan Akbar,et al.  Assessing recycling potential of carbon fiber reinforced plastic waste in production of eco-efficient cement-based materials , 2020 .

[21]  G. Cheraghian,et al.  Ultraviolet aging study on bitumen modified by a composite of clay and fumed silica nanoparticles , 2020, Scientific Reports.

[22]  H. Madani,et al.  An investigation on the influence of nano silica morphology on the characteristics of cement composites , 2020 .

[23]  Thomas J. Wallin,et al.  3D Printing of Viscoelastic Suspensions via Digital Light Synthesis for Tough Nanoparticle–Elastomer Composites , 2020, Advanced materials.

[24]  Huijun Wu,et al.  Study on properties of phase change foam concrete block mixed with paraffin / fumed silica composite phase change material , 2020 .

[25]  Xiaohong Zhu,et al.  Effect of nanosilica on sulfate resistance of cement mortar under partial immersion , 2020 .

[26]  P. Mounika.  Effect of Nano Silica on Mechanical Properties of Concrete , 2020 .

[27]  Shuangfeng Wang,et al.  Preparation and properties of phase change temperature-tuned composite phase change material based on sodium acetate trihydrate–urea/fumed silica for radiant floor heating system , 2019, Applied Thermal Engineering.

[28]  L. G. Li,et al.  Cementing efficiencies and synergistic roles of silica fume and nano-silica in sulphate and chloride resistance of concrete , 2019, Construction and Building Materials.

[29]  G. González,et al.  Control of water absorption in concrete materials by modification with hybrid hydrophobic silica particles , 2019, Construction and Building Materials.

[30]  R. Douglas Hooton,et al.  Future directions for design, specification, testing, and construction of durable concrete structures , 2019, Cement and Concrete Research.

[31]  Tingyu Wang,et al.  Effect of fumed silica additive on supercooling, thermal reliability and thermal stability of Na2HPO4·12H2O as inorganic PCM , 2019, Thermochimica Acta.

[32]  Y. J. Kim,et al.  Development of Ultra-High-Performance Concrete with Various Silica Admixtures , 2019, ACI Materials Journal.

[33]  A. Ben Fraj,et al.  Effect of nano-silica particles on the hydration, the rheology and the strength development of a blended cement paste , 2019, Cement and Concrete Composites.

[34]  F. Jin,et al.  Interface and anti-corrosion properties of sea-sand concrete with fumed silica , 2018, Construction and Building Materials.

[35]  Jukka Lahdensivu,et al.  Alkali-silica reaction in Southern-Finland’s bridges , 2018, Case Studies in Construction Materials.

[36]  K. M. Mini,et al.  Strength and Durability Studies of SCC Incorporating Silica Fume and Ultra Fine GGBS , 2018 .

[37]  Ali Akbar Ramezanianpour,et al.  Effect of controlled environmental conditions on mechanical, microstructural and durability properties of cement mortar , 2018 .

[38]  Afonso Rangel Garcez de Azevedo,et al.  Assessment of the durability of grout submitted to accelerated carbonation test , 2018 .

[39]  H. Satoh,et al.  Direct Transmission Electron Microscopy Visualization of the Cement Reaction by Colloidal Aggregation of Fumed Silica , 2018 .

[40]  Taesub Lim,et al.  A Comparative Study of Energy Performance of Fumed Silica Vacuum Insulation Panels in an Apartment Building , 2017 .

[41]  Jun Liu,et al.  Understanding the interacted mechanism between carbonation and chloride aerosol attack in ordinary Portland cement concrete , 2017 .

[42]  M. Nematzadeh,et al.  The effect of forta-ferro and steel fibers on mechanical properties of high-strength concrete with and without silica fume and nano-silica , 2017 .

[43]  A. Khaloo,et al.  Mechanical properties of fiber-reinforced high-performance concrete incorporating pyrogenic nanosilica with different surface areas , 2015 .

[44]  B. Łaźniewska-Piekarczyk.  The influence of chemical admixtures on cement hydration and mixture properties of very high performance self-compacting concrete , 2013 .

[45]  Surendra P. Shah,et al.  Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials , 2012 .

[46]  Mucteba Uysal,et al.  Durability performance of concrete incorporating Class F and Class C fly ashes , 2012 .

[47]  Konstantin Kovler,et al.  Effect of internal curing on durability-related properties of high performance concrete , 2012 .

[48]  B. Lothenbach,et al.  Supplementary cementitious materials , 2011 .

[49]  R. Siddique.  Utilization of silica fume in concrete: Review of hardened properties , 2011 .

[50]  George Z. Papageorgiou,et al.  Dynamic mechanical and morphological studies of isotactic polypropylene/fumed silica nanocomposites with enhanced gas barrier properties , 2006 .

[51]  B. Möser,et al.  Influence of sulfate solution concentration on the formation of gypsum in sulfate resistance test specimen , 2006 .

[52]  Aleksandar Matic,et al.  Accelerating effects of colloidal nano-silica for beneficial calcium–silicate–hydrate formation in cement , 2004 .