In-situ process and condition monitoring of advanced fibre-reinforced composite materials using optical fibre sensors

This paper presents a general overview of a number of optical fibre sensor systems which have been developed and used in advanced fibre-reinforced composites for in-situ process and condition monitoring. The in-situ process monitoring techniques were optical-fibre-based evanescent wave spectroscopy, transmission near-infrared spectroscopy and refractive index monitoring. The optical fibre sensors were successful in tracking the cure reaction. The condition monitoring of advanced fibre-reinforced composites was carried out using two intensity-based optical fibre sensor systems: an extrinsic multi-mode Fabry-Perot sensor and Bragg gratings. In addition to this, the feasibility of using the reinforcing fibre as a light guide was demonstrated. These sensor systems were evaluated under quasi-static, impact and fatigue loading. The test specimens consisted of prepreg-based carbon-fibre-reinforced epoxy and glass-fibre-reinforced epoxy filament-wound tubes. Excellent correlation was obtained between surface-mounted strain gauges and the embedded optical fibre sensors. The feasibility of using these sensor systems for the detection of impact damage and stiffness reduction in the composite due to fatigue damage was successfully demonstrated.

[1]  Kent A. Murphy,et al.  Optical fiber sensors , 1995, LEOS '95. IEEE Lasers and Electro-Optics Society 1995 Annual Meeting. 8th Annual Meeting. Conference Proceedings.

[2]  Xiaojun Wang,et al.  Self-monitoring carbon-fiber polymer-matrix composites , 1996, Smart Structures.

[3]  A. Kersey,et al.  High-resolution fibre-grating based strain sensor with interferometric wavelength-shift detection , 1992 .

[4]  Kent A. Murphy,et al.  Spatially weighted vibration sensors using tapered two-mode optical fibers , 1992 .

[6]  Raymond M. Measures,et al.  Wavelength demodulated Bragg grating fiber optic sensing systems for addressing smart structure critical issues , 1992 .

[7]  R. Day,et al.  Correlation between the acoustic emission and damage modes during splitting of carbon fibre reinforced poly-ether-ether-ketone composite , 1995, Journal of Materials Science Letters.

[8]  K. F. Hale,et al.  The application of optical fibres as witness devices for the detection of plastic strain and cracking , 1980 .

[9]  Gerald Meltz,et al.  Fiber Optic Bragg Grating Sensors , 1990, Other Conferences.

[10]  R. Measures.  The Detection of Damage and the Measurement of Strain within Composites by Means of Embedded Optical Fiber Sensors , 1991 .

[11]  R. Tatam,et al.  A fibre Fabry-Pérot temperature sensor using multiple wavelength interrogation , 1996 .

[12]  K. Reifsnider,et al.  Fatigue Damage Evaluation through Stiffness Measurements in Boron-Epoxy Laminates , 1981 .

[13]  J S Sirkis,et al.  In-line fiber étalon for strain measurement. , 1993, Optics letters.

[14]  Peter L. Fuhr.  Simultaneous single-fiber active vibration sensing and impact detection for large space structures , 1993, Smart Structures.

[15]  Gerard Franklyn Fernando,et al.  An intensity-based optical fibre sensor for fatigue damage detection in advanced fibre-reinforced composites , 1995 .

[16]  A. Barelli,et al.  Fiber optic heterodyne interferometer for vibration measurements in biological systems. , 1978, The Review of scientific instruments.

[17]  Yunjiang Rao,et al.  Combined spatial- and time-division-multiplexing scheme for fiber grating sensors with drift-compensated phase-sensitive detection. , 1995, Optics letters.

[18]  D. Jackson,et al.  Practical fiber-optic-based submicro-g accelerometer free from source and environmental perturbations. , 1989, Optics letters.

[19]  L. Reekie,et al.  Novel interrogating system for fibre Bragg grating sensors using an acousto-optic tunable filter , 1993 .

[20]  A. Mencaglia,et al.  Fiber optic vibration sensor for remote monitoring in high power electric machines. , 1989, Applied optics.

[21]  H. Kaczmarek,et al.  Ultrasonic Detection of Damage in CFRPs , 1995 .

[22]  B. N. Gupta,et al.  Sensitivity enhancement of an electro-optic sensor for displacement measurement , 1994 .

[23]  David A. Jackson,et al.  A simple fibre Fabry-Perot sensor , 1983 .

[24]  D. Jackson,et al.  Recent progress in fibre optic low-coherence interferometry , 1996 .

[25]  A. Kersey,et al.  Multiplexed fiber Bragg grating strain-sensor system with a fiber Fabry - Perot wavelength filter. , 1993, Optics letters.

[26]  D. Jackson,et al.  White Light Interferometer Using Linear Ccd Array with Signal Processing , 1995 .

[27]  Tonguy Liu,et al.  Design, fabrication, and evaluation of an optical fiber sensor for tensile and compressive strain measurements via the use of white light interferometry , 1996, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.