A novel method for production of spherical Ti-6Al-4V powder for additive manufacturing

A novel method was developed to produce spherical Ti-6Al-4V powder for advanced near-net-shape manufacturing processes including additive manufacturing and powder injection molding. The new process synergistically integrates a few common low-cost processing techniques including granulation, sintering, and de-oxygenation to produce spherical Ti alloy powders without relying on costly melting and atomizing techniques. This new granulation-sintering-deoxygenation (GSD) process can use low-cost source powders such as scrap Ti as the raw material. The spherical Ti-6Al-4V powder produced using this process has controlled particle size distribution and low oxygen content (< 0.15%), which meet the Aerospace Material Specification (AMS-4998) for spherical Ti-6Al-4V powder.

[1]  Maher I. Boulos,et al.  Plasma power can make better powders , 2004 .

[2]  Sapna S Gupta,et al.  Calciothermic reduction of TiO2: A diagrammatic assessment of the thermodynamic limit of deoxidation , 2009 .

[3]  Z. Fang,et al.  Pathways to Optimize Performance/Cost Ratio of Powder Metallurgy Titanium – A Perspective , 2012 .

[4]  Colin G. Mccracken,et al.  REVIEW OF TITANIUM. POWDER-PRODUCTION METHODS , 2010 .

[5]  Ma Qian,et al.  Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting , 2015 .

[6]  Damien Mangabhai,et al.  Production of titanium by the Armstrong Process , 2015 .

[7]  Daniel P. Barbis,et al.  Titanium powders from the hydride–dehydride process , 2015 .

[8]  R. Suzuki,et al.  Calciothermic reduction of titanium oxide in molten CaCl2 , 2003 .

[9]  T. Okabe,et al.  Titanium powder production by preform reduction process (PRP) , 2004 .

[10]  Ma Qian,et al.  Manipulation and Characterization of a Novel Titanium Powder Precursor for Additive Manufacturing Applications , 2015 .

[11]  J. Oh,et al.  Preparation method of Ti powder with oxygen concentration of <1000 ppm using Ca , 2012 .

[12]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[13]  L. Murr,et al.  Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies , 2012 .

[14]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[15]  Yang Yufen,et al.  Particle shape modification and related property improvements , 2008 .