Numerical and experimental study of scaling criteria accuracy for film cooling using CO2 coolant

[1]  Jun Li,et al.  Experimental and numerical study on film cooling effectiveness of an annular cascade endwall with different slot configuration , 2020 .

[2]  Z. Tao,et al.  A tip region film cooling study of the fan-shaped hole using PSP , 2020, International Journal of Heat and Mass Transfer.

[3]  Jianjun Liu,et al.  Effects of Mainstream Turbulence Intensity and Coolant-to-Mainstream Density Ratio on Film Cooling Effectiveness of Multirow Diffusion Slot Holes , 2019, Journal of Heat Transfer.

[4]  Todd A. Oliver,et al.  Large eddy simulation of compressible, shaped-hole film cooling , 2019, International Journal of Heat and Mass Transfer.

[5]  L. Wright,et al.  An experimental investigation on streamwise distance and density ratio effects on double-jet film-cooling , 2019, Applied Thermal Engineering.

[6]  Ronald S. Bunker,et al.  Evolution of Turbine Cooling , 2017 .

[7]  John W. McClintic,et al.  Effects of Freestream Mach Number, Reynolds Number, and Boundary Layer Thickness on Film Cooling Effectiveness of Shaped Holes , 2016 .

[8]  Daniel C. Crites,et al.  Application of S-PIV for Investigation of Round and Shaped Film Cooling Holes at High Density Ratios , 2016 .

[9]  M. Polanka,et al.  Film Coolant Property Variation in Scaling Gas Turbine Cooling Effectiveness , 2016 .

[10]  Zhong-yi Fu,et al.  The Effects of Inlet Reynolds Number, Exit Mach Number and Incidence Angle on Leading Edge Film Cooling Effectiveness of a Turbine Blade in a Linear Transonic Cascade , 2015 .

[11]  Hui Hu,et al.  An experimental study of density ratio effects on the film cooling injection from discrete holes by using PIV and PSP techniques , 2014 .

[12]  Christian Saumweber,et al.  Free-Stream Effects on the Cooling Performance of Cylindrical and Fan-Shaped Cooling Holes , 2012 .

[13]  Sayuri D. Yapa,et al.  Effects of varying Reynolds number, blowing ratio, and internal geometry on trailing edge cutback film cooling , 2012 .

[14]  J. Eaton,et al.  Film Effectiveness Measurements on the Pressure Surface of a Transonic Airfoil , 2010 .

[15]  Danesh K. Tafti,et al.  Effect of coolant-mainstream blowing ratio on leading edge film cooling flow and heat transfer : LES investigation , 2008 .

[16]  Sumanta Acharya,et al.  Large Eddy Simulation of Film Cooling Flow From an Inclined Cylindrical Jet , 2003 .

[17]  David G. Bogard,et al.  Scaling of performance for varying density ratio coolants on an airfoil with strong curvature and pressure gradient effects , 2000 .

[18]  Je-Chin Han,et al.  Detailed Film Cooling Measurements on a Cylindrical Leading Edge Model: Effect of Free-Stream Turbulence and Coolant Density , 1997 .

[19]  David G. Bogard,et al.  Investigation of Various Parametric Influences on Leading Edge Film Cooling , 1997 .

[20]  D. Lampard,et al.  The Effect of Density Ratio on the Heat Transfer Coefficient From a Film-Cooled Flat Plate , 1990 .

[21]  D. Bogard,et al.  Film-cooling effectiveness downstream of a single row of holes with variable density ratio , 1990 .

[22]  D. Lampard,et al.  Effects of density and velocity ratio on discrete hole film cooling , 1975 .

[23]  Brian Launder,et al.  Discrete-hole cooling in the presence of free stream turbulence and strong favourable pressure gradient , 1974 .

[24]  R. J. Goldstein,et al.  Effects of hole geometry and density on three-dimensional film cooling , 1974 .

[25]  Bin Yang,et al.  Heat Transfer Coefficients of Film Cooling on a Rotating Turbine Blade Model: Part II—Effects of Reynolds Number and Rotation Number , 2008 .

[26]  Je-Chin Han,et al.  Film-Cooling on a Gas Turbine Blade Pressure Side or Suction Side With Compound Angle Shaped Holes , 2007 .

[27]  V. Garg,et al.  Effect of Coolant Temperature and Mass Flow on Film Cooling of Turbine Blades , 1997 .

[28]  C. Liess,et al.  Experimental Investigation of Film Cooling With Ejection From a Row of Holes for the Application to Gas Turbine Blades , 1975 .