论文信息 - A design of a compact superconducting magnet for a 40 T hybrid magnet

A design of a compact superconducting magnet for a 40 T hybrid magnet

A superconducting magnet for a 40 T hybrid magnet was designed to be as compact as possible, and to be constructed with epoxy-impregnated layer winding using highly strengthened Nb/sub 3/Sn wires. The magnet generates 16 T in a 420 mm inner diameter of windings. The total coil mass of 4.1 tons, approximately 40% of the conventional cryostabilized magnet wound with copper-matrix wire was attained.

[1] S. Murase,et al. Superconducting and mechanical properties of alumina-copper reinforced Nb3Sn wire fabricated using the tube process , 1996 .

[2] Takao Takeuchi,et al. Development of 40 tesla class hybrid magnet system , 1992 .

[3] Y. Iwasa. Stability issues in high performance superconducting magnets , 1991 .

[4] Yukikazu Iwasa,et al. Hybrid III system , 1988 .

[5] J. Williams. How Far will a Magnet go Without Helium , 1986 .