Industrial Sustainability: Reviewing the Past and Envisioning the Future
暂无分享,去创建一个
Karl R. Haapala | Steven J. Skerlos | Fu Zhao | John W. Sutherland | Daniel R. Cooper | Aihua Huang | J. Sutherland | S. Skerlos | Fu Zhao | A. Huang
[1] Eckart Uhlmann,et al. An Evaluation of Building Sets Designed for Modular Machine Tool Structures to Support Sustainable Manufacturing , 2015 .
[2] Julian M Allwood,et al. Reusing steel and aluminum components at end of product life. , 2012, Environmental science & technology.
[3] J. Sutherland,et al. Energy Efficient or Energy Effective Manufacturing? , 2018, Energy Efficient Manufacturing.
[4] Stephen C. Graves,et al. Remanufacturing and energy savings. , 2011, Environmental science & technology.
[5] Zhang Hua,et al. Process Planning Support System for Green Manufacturing and its application , 2007 .
[6] Richard Roth,et al. Evaluating rare earth element availability: a case with revolutionary demand from clean technologies. , 2012, Environmental science & technology.
[7] Alan A. Luo,et al. Advanced lightweight materials and manufacturing processes for automotive applications , 2015 .
[8] Jessica Lagerstedt,et al. EcoDesign and The Ten Golden Rules: generic advice for merging environmental aspects into product development , 2006 .
[9] Kwang-Jae Kim,et al. A data mining approach considering missing values for the optimization of semiconductor-manufacturing processes , 2012, Expert Syst. Appl..
[10] M. Srinivasan,et al. Feature based process planning in environmentally conscious machining – Part 2: macroplanning , 1999 .
[11] William Z. Bernstein,et al. UMP Builder: Capturing and Exchanging Manufacturing Models for Sustainability , 2018 .
[12] S. Malkin,et al. Thermal Analysis of Grinding , 2007 .
[13] Katherine C. Morris,et al. Toward Standards-Based Generation of Reusable Life Cycle Inventory Data Models for Manufacturing Processes , 2019, Journal of Manufacturing Science and Engineering.
[14] John W. Sutherland,et al. Achieving Energy Efficient Machine Tools by Mass Reduction through Multi-Objective Optimization , 2019 .
[15] Guido Sonnemann,et al. Anticipating in-use stocks of carbon fiber reinforced polymers and related waste flows generated by the commercial aeronautical sector until 2050 , 2017 .
[16] Yongxian Zhu,et al. Mapping the annual flow of steel in the United States. , 2019, Environmental science & technology.
[17] Marian Chertow,et al. INDUSTRIAL SYMBIOSIS: Literature and Taxonomy , 2000 .
[18] Shahed Shojaeipour,et al. Sustainable manufacturing process planning , 2015 .
[19] M. Srinivasan,et al. Feature-based process planning for environmentally conscious machining – Part 1: microplanning , 1999 .
[20] Paul Mativenga,et al. High voltage fragmentation and mechanical recycling of glass fibre thermoset composite , 2016 .
[21] Julian M. Allwood,et al. Yield improvement opportunities for manufacturing automotive sheet metal components , 2017 .
[22] Yong He,et al. Optimization of process planning for reducing material consumption in additive manufacturing , 2017 .
[23] Zhifeng Liu,et al. Operation scheduling of multi-hydraulic press system for energy consumption reduction , 2017 .
[24] Barbara Linke,et al. Leveraging Technology for a Sustainable World , 2012 .
[25] Hyung-Ju Kim,et al. Greenhouse Gas Emissions Payback for Lightweighted Vehicles Using Aluminum and High‐Strength Steel , 2010 .
[26] K. Jin,et al. A fuzzy model for environmental benign process planning selection , 2003, 2003 EcoDesign 3rd International Symposium on Environmentally Conscious Design and Inverse Manufacturing.
[27] Awais Ahmed,et al. Design methodology of organic Rankine cycle for waste heat recovery in cement plants , 2018 .
[28] Peggy Zwolinski,et al. Innovation in Life Cycle Engineering and Sustainable Development , 2006 .
[29] David Dornfeld,et al. Cost and Energy Consumption Optimization of Product Manufacture in a Flexible Manufacturing System , 2012 .
[30] G. Seliger,et al. Opportunities of Sustainable Manufacturing in Industry 4.0 , 2016 .
[31] David Dornfeld,et al. A comparative analysis of the environmental impacts of machine tool manufacturing facilities , 2015 .
[32] John W. Sutherland,et al. A new approach to scheduling in manufacturing for power consumption and carbon footprint reduction , 2011 .
[33] Satyandra K. Gupta,et al. Sustainability characterisation for manufacturing processes , 2014 .
[34] R. Fuller. Utopia or Oblivion: The Prospects for Humanity , 1969 .
[35] Reimund Neugebauer,et al. Bionics Based Energy Efficient Machine Tool Design , 2012 .
[36] María Estela Peralta Alvarez,et al. A Review of Sustainable Machining Engineering: Optimization Process Through Triple Bottom Line , 2016 .
[37] Duc Truong Pham,et al. Industrial Cloud Robotics Towards Sustainable Manufacturing , 2016 .
[38] N. Jacobsen. Industrial Symbiosis in Kalundborg, Denmark: A Quantitative Assessment of Economic and Environmental Aspects , 2006 .
[39] Daniel A. Menascé,et al. Factory optima: a web-based system for composition and analysis of manufacturing service networks based on a reusable model repository , 2019, Int. J. Comput. Integr. Manuf..
[40] André Zein,et al. Bringing sustainable manufacturing into practice--the machine tool case , 2008 .
[41] J. Bi,et al. The Circular Economy: A New Development Strategy in China , 2006 .
[42] Silvia Menato,et al. Exploiting the Digital Twin in the Assessment and Optimization of Sustainability Performances , 2018, 2018 International Conference on Intelligent Systems (IS).
[43] Pierre Baptiste,et al. Scheduling issues for environmentally responsible manufacturing: The case of hoist scheduling in an electroplating line , 2006 .
[44] Axel Tuma,et al. Energy-efficient scheduling in manufacturing companies: A review and research framework , 2016, Eur. J. Oper. Res..
[45] Lihui Wang,et al. Optimization of machining processes from the perspective of energy consumption: A case study , 2012 .
[46] Jiafu Wan,et al. Implementing Smart Factory of Industrie 4.0: An Outlook , 2016, Int. J. Distributed Sens. Networks.
[47] Ernst Worrell,et al. The energy required to produce materials: constraints on energy-intensity improvements, parameters of demand , 2013, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.
[48] Valerie M. Thomas,et al. The Industrial Ecology of Lead and Electric Vehicles , 1997 .
[49] Zhifeng Liu,et al. Analysis of a novel energy-efficient system with double-actuator for hydraulic press , 2017 .
[50] J. Sutherland,et al. Evaluating the environmental benefits of implementing Industrial Symbiosis to used electric vehicle batteries , 2019, Procedia CIRP.
[51] Ting Wang,et al. Lightweight Design of Mechanical Structures based on Structural Bionic Methodology , 2010 .
[52] Daniel R. Cooper,et al. The Environmental Impacts of Reuse: A Review , 2017 .
[53] Weidong Li,et al. A Systematic Approach of Process Planning and Scheduling Optimization for Sustainable Machining , 2015, Sustainable Manufacturing and Remanufacturing Management.
[54] Christoph Herrmann,et al. Energy oriented simulation of manufacturing systems - Concept and application , 2011 .
[55] Peter Scallan. 2 – What is process planning? , 2003 .
[56] Andres F. Clarens,et al. A Review of Engineering Research in Sustainable Manufacturing , 2013 .
[57] Amund N. Løvik,et al. Long-term strategies for increased recycling of automotive aluminum and its alloying elements. , 2014, Environmental science & technology.
[58] Christoph Herrmann,et al. Process chain simulation to foster energy efficiency in manufacturing , 2009 .
[59] Janet M. Twomey,et al. Unit Process Life Cycle Inventory for Product Manufacturing Operations , 2009 .
[60] W. L. Dalmijn,et al. The development of vehicle recycling in Europe: Sorting, shredding, and separation , 2007 .
[61] Joost Duflou,et al. Energy related environmental impact reduction opportunities in machine design: case study of a laser cutting machine , 2010 .
[62] Xun Xu,et al. Cloud Manufacturing in Support of Sustainability , 2014 .
[63] Christoph Herrmann,et al. Energy Efficiency Measures for the Design and Operation of Machine Tools: An Axiomatic Approach , 2011 .
[64] Soraia Pimenta,et al. Recycling carbon fibre reinforced polymers for structural applications: technology review and market outlook. , 2011, Waste management.
[65] Wim Dewulf,et al. Unit process impact assessment for discrete part manufacturing: A state of the art , 2010 .
[66] Xiaohong Li. Industrial Ecology and Industry Symbiosis for Environmental Sustainability: Definitions, Frameworks and Applications , 2017 .
[67] Hyung Chul Kim,et al. Life Cycle Assessment of Vehicle Lightweighting: A Physics-Based Model To Estimate Use-Phase Fuel Consumption of Electrified Vehicles. , 2016, Environmental science & technology.
[68] Jonathan M Cullen,et al. Mapping the global flow of aluminum: from liquid aluminum to end-use goods. , 2013, Environmental science & technology.
[69] Karl R. Haapala,et al. Optimization of steel production to improve lifecycle environmental performance , 2007 .
[70] Matthias Finkbeiner,et al. Addressing Sustainability and Flexibility in Manufacturing Via Smart Modular Machine Tool Frames to Support Sustainable Value Creation , 2015 .
[71] I. S. Jawahir,et al. Towards Developing Sustainable Reconfigurable Manufacturing Systems , 2018 .
[72] F. Krausmann,et al. How Circular is the Global Economy?: An Assessment of Material Flows, Waste Production, and Recycling in the European Union and the World in 2005 , 2015 .
[73] Markus Wabner,et al. Lightweight components for energy-efficient machine tools , 2011 .
[74] Kate S. Whitefoot,et al. Consequential Life Cycle Assessment With Market‐Driven Design , 2011 .
[75] Christian Brecher,et al. Materials in machine tool structures , 2015 .
[76] Christoph Herrmann,et al. Energy Efficiency through Optimised Coordination of Production and Technical Building Services , 2008 .
[77] David Dornfeld,et al. Machine Tool Design and Operation Strategies for Green Manufacturing , 2010 .
[78] Vera Straka,et al. FACILITATING GREATER REUSE AND RECYCLING OF STRUCTURAL STEEL IN THE CONSTRUCTION AND DEMOLITION PROCESS , 2006 .
[79] Eberhard Abele,et al. Analyzing Energy Consumption of Machine Tool Spindle Units and Identification of Potential for Improvements of Efficiency , 2011 .
[80] Erik Wilhelm,et al. Comparing the Mass, Energy, and Cost Effects of Lightweighting in Conventional and Electric Passenger Vehicles , 2014 .
[81] T. Gutowski,et al. Material efficiency: A white paper , 2011 .
[82] Konstantin Biel,et al. Systematic literature review of decision support models for energy-efficient production planning , 2016, Comput. Ind. Eng..
[83] Nagi Gebraeel,et al. Predictive Maintenance Management Using Sensor-Based Degradation Models , 2009, IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans.
[84] Lei Li,et al. An Energy-Saving Method by Balancing the Load of Operations for Hydraulic Press , 2017, IEEE/ASME Transactions on Mechatronics.
[85] Yingfeng Zhang,et al. A comprehensive review of big data analytics throughout product lifecycle to support sustainable smart manufacturing: A framework, challenges and future research directions , 2019, Journal of Cleaner Production.
[86] N. V. Nes,et al. Product lifetime optimization: a challenging strategy towards more sustainable consumption patterns , 2006 .
[87] P. Sheng,et al. Environmental versus Conventional Planning for Machined Components , 2000 .
[88] Karl R. Haapala,et al. Terminology to support manufacturing process characterization and assessment for sustainable production , 2016 .
[89] Karthik Ramani,et al. Integrated Sustainable Life Cycle Design: A Review , 2010 .
[90] Pekka Ruohonen,et al. Analysis of alternative secondary heat uses to improve energy efficiency-case: a Finnish mechanical pulp and paper mill. , 2010 .
[91] Wim Dewulf,et al. Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 2: case studies , 2012, The International Journal of Life Cycle Assessment.
[92] M. Hocking,et al. Paper Versus Polystyrene: A Complex Choice , 1991, Science.
[93] Jingchao Jiang,et al. Optimization of process planning for reducing material waste in extrusion based additive manufacturing , 2019 .
[94] Jahau Lewis Chen,et al. A simple life cycle assessment method for green product conceptual design , 2001, Proceedings Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing.
[95] David Dornfeld,et al. Moving towards green and sustainable manufacturing , 2014 .
[96] Jan W. Gooch,et al. Encyclopedic dictionary of polymers , 2007 .
[97] P. Sheng,et al. An analytical approach for determining the environmental impact of machining processes , 1995 .
[98] Julian M. Allwood,et al. Sustainable Materials - With Both Eyes Open , 2012 .
[99] Chinedum E. Okwudire,et al. Energy-Efficient Controller Design for a Redundantly Actuated Hybrid Feed Drive With Application to Machining , 2016, IEEE/ASME Transactions on Mechatronics.
[100] Jean-Marc Frayret,et al. Green social networking: concept and potential applications to initiate industrial synergies , 2016 .
[101] Julian M Allwood,et al. How Will Copper Contamination Constrain Future Global Steel Recycling? , 2017, Environmental science & technology.
[102] P. Ehrlich,et al. IMPACT OF POPULATION GROWTH , 1971, Science.
[103] Björn Johansson,et al. Environmental aspects in manufacturing system modelling and simulation—State of the art and research perspectives , 2013 .
[104] G. Keoleian,et al. Not all primary aluminum is created equal: life cycle greenhouse gas emissions from 1990 to 2005. , 2009, Environmental science & technology.
[105] Catherine Azzaro-Pantel,et al. A Bicriteria Optimisation Approach for Waste Management of Carbon Fibre Reinforced Polymers Used in Aerospace Applications: Application to the Case Study of France , 2017 .
[106] Franjo Cecelja,et al. Semantic algorithm for Industrial Symbiosis network synthesis , 2015, Comput. Chem. Eng..
[107] Alexander Kaluza,et al. Life cycle engineering of lightweight structures , 2018 .
[108] Srikanth Devanathan,et al. Integration of Sustainability Into Early Design Through the Function Impact Matrix , 2010 .
[109] Karl R. Haapala,et al. Simultaneous Consideration of Unit Manufacturing Processes and Supply Chain Activities for Reduction of Product Environmental and Social Impacts , 2016 .
[110] Yoshihiro Adachi,et al. Evolution of aluminum recycling initiated by the introduction of next-generation vehicles and scrap sorting technology , 2012 .
[111] Timothy G. Gutowski,et al. An Environmental and Cost Analysis of Stamping Sheet Metal Parts , 2017 .
[112] Cristina Elsido,et al. Optimization of Organic Rankine Cycles for Waste Heat Recovery From Aluminum Production Plants , 2019, Front. Energy Res..
[113] Duc Truong Pham,et al. Digital Twin-Based Energy Modeling of Industrial Robots , 2018 .
[114] Julian M. Allwood,et al. Scrap, carbon and cost savings from the adoption of flexible nested blanking , 2019 .
[115] Steve Evans,et al. Industrial ecology at factory level – a conceptual model , 2012 .
[116] Fu Zhao,et al. Characterization of Particle Emission From Fuse Deposition Modeling Printers , 2017 .
[117] Ying Peng,et al. A dynamic predictive maintenance model considering spare parts inventory based on hidden semi-Markov model , 2013 .
[118] P. Laybourn,et al. Redefining Industrial Symbiosis , 2012 .
[119] David Wallace,et al. Approximate Life‐Cycle Assessment of Product Concepts Using Learning Systems , 2000 .
[120] David Dornfeld,et al. Environmental Impact Characterization of Milling and Implications for Potential Energy Savings in Industry , 2012 .
[121] John W. Sutherland,et al. A process planning method for reduced carbon emissions , 2014, Int. J. Comput. Integr. Manuf..
[122] Mohammed A. Omar,et al. Life cycle assessment-based selection for a sustainable lightweight body-in-white design , 2012 .
[123] Franjo Cecelja,et al. emantic input / output matching for waste processing in ndustrial symbiosis , 2014 .
[124] Julian M. Allwood,et al. The technical potential for reducing metal requirements through lightweight product design , 2011 .
[125] Shigemi Kagawa,et al. Global Flows of Critical Metals Necessary for Low-Carbon Technologies: The Case of Neodymium, Cobalt, and Platinum , 2014, Environmental science & technology.
[126] John W. Sutherland,et al. Toward the development of process plans with reduced environmental impacts , 2012 .
[127] Wim Dewulf,et al. Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) Part 1: Methodology Description , 2011 .
[128] William McDonough,et al. Cradle to Cradle: Remaking the Way We Make Things , 2002 .
[129] Mike E. Davies,et al. Structure and morphology of industrial symbiosis networks: The case of Kalundborg , 2011 .
[130] Hao Zhang,et al. Reusable unit process life cycle inventory for manufacturing: gas metal arc welding , 2018, Production Engineering.
[131] Chinedum E. Okwudire,et al. Comparative LCA of a Linear Motor and Hybrid Feed Drive under High Cutting Loads , 2014 .
[132] Anh Tong,et al. Integration of Sustainability Indicators and the Viable System Model Towards a Systemic Sustainability Assessment Methodology , 2018, Systems Research and Behavioral Science.
[133] Giacomo Liotta,et al. Closing Global Material Loops: Initial Insights into Firm‐Level Challenges , 2017 .
[134] Mark Krystofik,et al. Circular economy strategies for mitigating critical material supply issues , 2017 .
[135] Jian Cao,et al. Exergy analysis of incremental sheet forming , 2012, Prod. Eng..
[136] Michael R. Overcash,et al. Methodology for developing gate-to-gate Life cycle inventory information , 2000 .
[137] Renaldi Renaldi,et al. Energy and Resource Efficiency of SLS/SLM Processes (Keynote Paper) , 2011 .
[138] Jonathan M. Cullen. Circular Economy: Theoretical Benchmark or Perpetual Motion Machine? , 2017 .
[139] John W. Sutherland,et al. The Impact of Maintenance and Technology Change on Remanufacturing as a Recovery Alternative for Used Wind Turbines , 2014 .
[140] Jingzheng Ren,et al. Carbon footprints of urban transition: Tracking circular economy promotions in Guiyang, China , 2017 .
[141] Julian M. Allwood,et al. Potential for energy savings by heat recovery in an integrated steel supply chain , 2016 .
[142] Fu Zhao,et al. Economic and environmental characteristics of global cellular telephone remanufacturing , 2003, IEEE International Symposium on Electronics and the Environment, 2003..
[143] Laura Porcu,et al. Cloud manufacturing as a sustainable process manufacturing route , 2018 .
[144] Julian M Allwood,et al. Product life trade-offs: what if products fail early? , 2013, Environmental science & technology.
[145] Joe Miemczyk,et al. Photocopier remanufacturing at Xerox UK A description of the process and consideration of future policy issues , 2006 .
[146] Damien Trentesaux,et al. Sustainability in manufacturing operations scheduling: A state of the art review , 2015 .
[147] Karl R. Haapala,et al. Integrating Sustainable Manufacturing Assessment into Decision Making for a Production Work Cell , 2015 .
[148] Bert Bras,et al. Designing Industrial Networks Using Ecological Food Web Metrics. , 2016, Environmental science & technology.
[149] Jan Bentzen,et al. Estimating the rebound effect in US manufacturing energy consumption , 2004 .
[150] María D. Bovea,et al. The influence of impact assessment methods on materials selection for eco-design , 2006 .
[151] Zhifeng Liu,et al. Stiffness design of machine tool structures by a biologically inspired topology optimization method , 2014 .
[152] Timothy G Gutowski,et al. What gets recycled: an information theory based model for product recycling. , 2007, Environmental science & technology.
[153] Ling Zhao,et al. Structural Bionic Design and Experimental Verification of a Machine Tool Column , 2008 .
[154] Julian M. Allwood,et al. The development of a hot rolling process for variable cross-section I-beams , 2012 .
[155] Thomas E. Lasswell,et al. The Waste Makers. , 1960 .
[156] David Dornfeld,et al. Green Manufacturing and Sustainable Manufacturing Partnership Title Assessment of Lean and Green Strategies by Simulation of Manufacturing Systems in Discrete Production Environments , 2013 .
[157] John W. Sutherland,et al. A comparison of manufacturing and remanufacturing energy intensities with application to diesel engine production , 2008 .
[158] F. Cherubini,et al. LCA of magnesium production Technological overview and worldwide estimation of environmental burdens , 2008 .
[159] Christoph Herrmann,et al. Glocalized Solutions for Sustainability in Manufacturing , 2011 .
[160] R. Turner,et al. Economics of Natural Resources and the Environment , 1989 .
[161] Katherine C. Morris,et al. Towards a Standards-Based Methodology for Extending Manufacturing Process Models for Sustainability Assessment , 2018 .
[162] Sujit Das,et al. Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components , 2016 .
[163] Karl R. Haapala,et al. Characterizing the influence of resource-energy-exergy factors on the environmental performance of additive manufacturing systems , 2018, Journal of Manufacturing Systems.
[164] E. Olivetti,et al. Improving aluminum recycling: A survey of sorting and impurity removal technologies , 2012 .
[165] Katherine C. Morris,et al. Standard Representations for Sustainability Characterization of Industrial Processes , 2016 .
[166] Timothy G. Gutowski,et al. An Environmental Analysis of Machining , 2004 .
[167] J. C. Van Weenen,et al. Towards sustainable product development , 1995 .
[168] John W. Sutherland,et al. Comparing Energy and Other Measures of Environmental Performance in the Original Manufacturing and Remanufacturing of Engine Components , 2007 .
[169] Barbara Linke,et al. Reusable unit process life cycle inventory for manufacturing: grinding , 2017, Prod. Eng..
[170] Ningjian Huang,et al. Optimal Scheduling to Achieve Energy Reduction in Automotive Paint Shops , 2009 .
[171] J. Ehrenfeld,et al. Industrial Ecology in Practice: The Evolution of Interdependence at Kalundborg , 1997 .
[172] Julian M. Allwood,et al. Component level strategies for exploiting the lifespan of steel in products , 2014 .
[173] David Dornfeld,et al. Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use , 2011 .
[174] Arpad Horvath,et al. Green Manufacturing and Sustainable Manufacturing Partnership Title Environmental Analysis of Milling Machine Tool Use in Various Manufacturing Environments , 2022 .
[175] Alain Bernard,et al. Build orientation optimization for multi-part production in additive manufacturing , 2017, J. Intell. Manuf..
[176] Brian R. Keeble BSc Mbbs Mrcgp. The Brundtland report: ‘Our common future’ , 1988 .
[177] Karl R. Haapala,et al. Composability of Unit Manufacturing Process Models for Manufacturing Systems Analysis , 2016 .
[178] Jonathan M Cullen,et al. Mapping the global flow of steel: from steelmaking to end-use goods. , 2012, Environmental science & technology.
[179] Sebastian Thiede,et al. A State-of-the-art Review and Evaluation of Tools for Factory Sustainability Assessment , 2013 .
[180] David G. Woodward,et al. Life cycle costing—Theory, information acquisition and application , 1997 .
[181] R. Fuller,et al. Operating Manual for Spaceship Earth , 1969 .
[182] Katherine C. Morris,et al. Research directions for an open unit manufacturing process repository: A collaborative vision , 2017 .
[183] Arlindo Silva,et al. Technology and Manufacturing Process Selection , 2014 .
[184] Katherine C. Morris,et al. An Open Web-Based Repository for Capturing Manufacturing Process Information , 2016 .
[185] Kornel Ehmann,et al. Machining Process Modeling: A Review , 1997 .
[186] David Rejeski,et al. Mars, Materials, and Three Morality Plays: Materials Flows and Environmental Policy , 1997 .
[187] Daniel R. Cooper,et al. Metal recovery during melting of extruded machining chips , 2018, Journal of Cleaner Production.
[188] Arturo Molina,et al. A methodology to create a sensing, smart and sustainable manufacturing enterprise , 2018, Int. J. Prod. Res..
[189] R. Domingo,et al. Model of efficient and sustainable improvements in a lean production system through processes of environmental innovation , 2013 .
[190] Ronald A. Kohser,et al. DeGarmo's Materials and Processes in Manufacturing , 2020 .
[191] Wim Dewulf,et al. Energy and Resource Efficiency of Laser Cutting Processes , 2014 .
[192] André Thomsen,et al. Understanding obsolescence: a conceptual model for buildings , 2011 .
[193] J. Guiltinan,et al. Creative Destruction and Destructive Creations: Environmental Ethics and Planned Obsolescence , 2009 .
[194] Marcus Bengtsson,et al. Machining Equipment Life Cycle Costing Model with Dynamic Maintenance Cost , 2016 .
[195] Julian M. Allwood,et al. Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors , 2011 .
[196] W. Vermeulen,et al. Eco-industrial park initiatives in the USA and the Netherlands: first lessons , 2004 .
[197] Janet M. Twomey,et al. Advancements in Unit Process Life Cycle Inventories (UPLCI) Tools , 2018 .
[198] Tirth Dave,et al. Designing ecologically-inspired robustness into a water distribution network , 2020 .
[199] J. Allwood,et al. Finding the Most Efficient Way to Remove Residual Copper from Steel Scrap , 2019, Metallurgical and Materials Transactions B.
[200] S. Valentine. Kalundborg Symbiosis: fostering progressive innovation in environmental networks , 2016 .
[201] N. R. Sakthivel,et al. Machine Learning Approach to the Prediction of Surface Roughness Using Statistical Features of Vibration Signal Acquired in Turning , 2015 .
[202] A. Rashid,et al. Towards circular economy implementation: a comprehensive review in context of manufacturing industry , 2016 .
[203] Daniel B Müller,et al. The role of automobiles for the future of aluminum recycling. , 2012, Environmental science & technology.
[204] Daniel R. Cooper,et al. An Optimal Reverse Material Supply Chain for U.S. Aluminum Scrap , 2019, Procedia CIRP.
[205] Timothy G. Gutowski,et al. The energy requirements and environmental impacts of sheet metal forming: An analysis of five forming processes , 2017 .
[206] M. Schikorra,et al. Hot profile extrusion of AA-6060 aluminum chips , 2009 .
[207] J. Sutherland,et al. Promoting a circular economy in the solar photovoltaic industry using life cycle symbiosis , 2020 .
[208] J. Schnoor,et al. Sustainability science and engineering: the emergence of a new metadiscipline. , 2003, Environmental science & technology.
[209] Lin Li,et al. Simulation-based energy efficiency improvement for sustainable manufacturing systems , 2012 .
[210] M. Hekkert,et al. Conceptualizing the Circular Economy: An Analysis of 114 Definitions , 2017 .
[211] H. Friedrich,et al. Life-Cycle Assessment of the Recycling of Magnesium Vehicle Components , 2013 .
[212] Sami Kara,et al. Unit process energy consumption models for material removal processes , 2011 .
[213] Geraldo Ferrer,et al. The economics of tire remanufacturing , 1997 .
[214] Geoffrey P. Hammond,et al. Heat recovery opportunities in UK industry , 2014 .
[215] Chris Yuan,et al. Numerical Modeling of Specific Energy Consumption in Machining Process , 2013 .
[216] Gary A. Leeke,et al. Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties , 2015 .
[217] Mahesh Mani,et al. Sustainability Characterization for Additive Manufacturing , 2014, Journal of research of the National Institute of Standards and Technology.
[218] Satyandra K. Gupta,et al. Review on Sustainability Characterization for Manufacturing Processes , 2013 .
[219] P. Sheng,et al. Multi-Objective Process Planning in Environmentally Conscious Manufacturing: A Feature-Based Approach , 1995 .
[220] Dirk Bähre,et al. Selecting Manufacturing Process Chains in the Early Stage of the Product Engineering Process with Focus on Energy Consumption , 2014 .
[221] Peter Scallan. Process Planning: The Design/Manufacture Interface , 2003 .
[222] P. Brunner,et al. Metabolism of the Anthroposphere , 1991 .