Modeling and simulation analysis of large-scale smelting load

Currently, special power load represented by smelting load presents the characteristics of large capacity and high density in part of China power grid. It will have an important impact on the dynamic characteristics of power systems. The relevant special load model is needed in power system analysis as the existing model fails to accurately describe the special load characteristics. In this paper, taking steel smelting load as an example, the production characteristic and electrical characteristic of special load are illustrated. Then, based on the different characteristics of special load in the stationary production process and impact process, the special load model is put forward which combines the load electrical characteristic and power impact characteristic. The new model can describe the severe power impact during load production process while the system voltage and frequency influence is also involved. Finally, the method to confirm the special load parameters is given.

[1]  Liu Yan-yang.  Effect of induction motor model structure and parameters on simulating computation of electric power system transient stability , 2004 .

[2]  Shih-Shong Yen,et al.  Enhancement of static excitation system performance for generators near electric arc furnace loads , 1999 .

[3]  An Ning.  A Periodic Shock Load Model Incarnating Power Demand Initiative of Rolling Mill , 2011 .

[4]  Jiang Jian-guo.  A Novel Chaotic Model of AC Electric Arc Furnace for Power Quality Study , 2008 .

[5]  Chen Qian.  Synthesis load model with ideal transformer , 2011 .

[6]  Chen Qian.  Load modeling for Ningxia Grid with special loads , 2012 .

[7]  Mao Chao.  Comparison between the load models with considering distribution network directly or indirectly , 2008 .

[8]  Gu Wei.  Influence of High-Capacity Impact Loads on Transient Stability of Regional Power System , 2008 .

[9]  Wang Zhaodong.  Development and Prosperity of Steel Rolling Technology in China , 2009 .

[10]  O. Ozgun,et al.  Flicker Study Using a Novel ARC Furnace Model , 2002, IEEE Power Engineering Review.

[11]  V. Vittal,et al.  Risk Assessment for Transformer Loading , 2001, IEEE Power Engineering Review.

[12]  Ai Qian.  Application of extended Kalman filter in parameter identification of dynamic load model , 2007 .

[13]  Chen Fen.  Application of fuzzy clustering in component-based modeling approach , 2003 .

[14]  Ju Ping.  Ant colony optimization algorithm and disturbance analysis of synchronous generator parameter identification , 2009 .

[15]  Wu Guang-ning.  Effect of Traction Loads on Insulation Aging and Loss-of-life of Transformers , 2005 .

[16]  Gu Danzhen.  A General Modeling Method for the Impact Load , 2006 .