Molecular beam epitaxial growth of InAs self-assembled quantum dots with light-emission at 1.3 μm

Abstract We studied InAs self-assembled island formation as a function of the growth rate and examined the effects of overgrown layers on the light emission features. The InAs islands were grown by a conventional molecular beam epitaxy on GaAs. We found that the island size and density strongly depended on the growth rate. With a reduction in the growth rate, the island size increased and the light emission wavelength correspondingly shifted to the longer side. The emission wavelength reached 1.3 μm when the growth-rate was reduced to 2×10 −3 monolayer (ML)/s, but the island density decreased (5×10 9 cm −2 ). We also confirmed that the emission wavelength red-shifted when islands were covered by InGaAs alloys, depending on both the thickness and In composition. Using a combined method, growing islands at a growth rate in the middle range and embedding islands with InGaAs layers, we obtained relatively high density islands with a light emission at 1.3 μm. We confirmed room-temperature lasing from these quantum dots with a threshold current of 8 mA under continuous wave conditions.

[1]  S. Denbaars,et al.  Direct formation of quantum‐sized dots from uniform coherent islands of InGaAs on GaAs surfaces , 1993 .

[2]  M. Reed,et al.  Spatial quantization in GaAs–AlGaAs multiple quantum dots , 1986 .

[3]  N. Kobayashi,et al.  Strained coherent InAs quantum box islands on GaAs(100): Size equalization, vertical self‐organization, and optical properties , 1996 .

[4]  A. Madhukar,et al.  In situ approach to realization of three‐dimensionally confined structures via substrate encoded size reducing epitaxy on nonplanar patterned substrates , 1993 .

[5]  Jamie D. Phillips,et al.  Room-temperature operation of In0.4Ga0.6As/GaAs self-organised quantum dot lasers , 1996 .

[6]  Hiroshi Ishikawa,et al.  Room temperature CW operation at the ground state of self-formed quantum dot lasers with multi-stacked dot layer , 1996 .

[7]  Mikhail V. Maximov,et al.  Formation of coherent superdots using metal‐organic chemical vapor deposition , 1996 .

[8]  Akio Sasaki,et al.  Initial growth stage and optical properties of a three‐dimensional InAs structure on GaAs , 1994 .

[9]  Takashi Fukui,et al.  GaAs tetrahedral quantum dot structures fabricated using selective area metalorganic chemical vapor deposition , 1991 .

[10]  R. A. Logan,et al.  Toward quantum well wires: Fabrication and optical properties , 1982 .

[11]  Mikhail V. Maximov,et al.  Low threshold, large To injection laser emission from (InGa)As quantum dots , 1994 .

[12]  H. Sakaki,et al.  Multidimensional quantum well laser and temperature dependence of its threshold current , 1982 .

[13]  Harris,et al.  Vertically aligned and electronically coupled growth induced InAs islands in GaAs. , 1996, Physical review letters.

[14]  A. Madhukar,et al.  Onset of incoherency and defect introduction in the initial stages of molecular beam epitaxical growth of highly strained InxGa1−xAs on GaAs(100) , 1990 .

[15]  Hiroshi Ishikawa,et al.  Lasing with low threshold current and high output power from columnar-shaped InAs/GaAs quantum dots , 1998 .

[16]  David T. D. Childs,et al.  1.3 µm Room Temperature Emission from InAs/GaAs Self-Assembled Quantum Dots , 1999 .

[17]  W. Wiegmann,et al.  Structure of AlAs‐GaAs interfaces grown on (100) vicinal surfaces by molecular beam epitaxy , 1984 .

[18]  T. Fukui,et al.  (AlAs)0.5(GaAs)0.5 fractional‐layer superlattices grown on (001) vicinal surfaces by metalorganic chemical vapor deposition , 1987 .

[19]  K. Nishi,et al.  A narrow photoluminescence linewidth of 21 meV at 1.35 μm from strain-reduced InAs quantum dots covered by In0.2Ga0.8As grown on GaAs substrates , 1999 .

[20]  Diana L. Huffaker,et al.  Electroluminescence efficiency of 1.3 μm wavelength InGaAs/GaAs quantum dots , 1998 .