A Measure of Stability for Mobile Manipulators With Application to Heavy-Duty Hydraulic Machines

This paper describes the development ofa suitable algorithm to compute the potential of tipping-over for vehicles that carry manipulators. The energy method developed by Messuri and Klein (1985) is extended here to quantitatively reflect the effect of forces and moments arising from the manipulation of the implement. The amount of the impact energy that can be sustained by the vehicle without tipping-over, about each edge of potential overturning is computed. First, the instantaneous onset of instability configuration of the machine about the edge is determined by constructing an equilibrium plane. Next, the work done by all acting forces and moments when the machine is virtually brought to this unstable stance from the current state, is calculated. This work is the indication of the proximity of the machine to tipping-over around that edge. The application of this study is directed at industrial mobile machines that carry human-operated hydraulic manipulators. The algorithm is there-fore used to study the stability of an excavator based log-loader. Simulation studies clearly show the importance of inertial loads in determining the stability of such machines.

[1]  Ahmad Ghasempoor,et al.  A measure of machine stability for moving base manipulators , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[2]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[3]  Kenneth J. Waldron,et al.  An Analytical Approach for Gait Study and Its Applications on Wave Gaits , 1987 .

[4]  Nariman Sepehri,et al.  Computer-Assisted Control of Excavator-Based Machines , 1993 .

[5]  Robert B. McGhee,et al.  Adaptive Locomotion of a Multilegged Robot over Rough Terrain , 1979, IEEE Transactions on Systems, Man, and Cybernetics.

[6]  Steven Dubowsky,et al.  Planning mobile manipulator motions considering vehicle dynamic stability constraints , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[7]  Joseph K. Davidson,et al.  A Mechanics-Based Computer Algorithm for Displaying the Margin of Static Stability in Four-Legged Vehicles , 1990 .

[8]  A. Frank.  On the stability of an algorithmic biped locomotion machine , 1971 .

[9]  J. Y. S. Luh,et al.  On-Line Computational Scheme for Mechanical Manipulators , 1980 .

[10]  R. McGhee,et al.  On the stability properties of quadruped creeping gaits , 1968 .

[11]  Nariman Sepehri,et al.  Simulation and Experimental Studies of Gear Backlash and Stick-Slip Friction in Hydraulic Excavator Swing Motion , 1996 .

[12]  Shin-Min Song,et al.  Machines That Walk , 1988 .

[13]  Kenneth J. Waldron,et al.  Relationship between payload and speed in legged locomotion systems , 1990, IEEE Trans. Robotics Autom..

[14]  Clarence W. de Silva,et al.  Parameter estimation and actuator friction analysis for a mini excavator , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[15]  Shahram Tafazoli Bilandi.  Identification of frictional effects and structural dynamics for improved control of hydraulic manipulators , 1997 .

[16]  Charles A. Klein,et al.  Automatic body regulation for maintaining stability of a legged vehicle during rough-terrain locomotion , 1985, IEEE J. Robotics Autom..

[17]  Shin-Min Song,et al.  Fully automated obstacle-crossing gaits for walking machines , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[18]  Yong-San Yoon,et al.  Design of a robust dynamic gait of the biped using the concept of dynamic stability margin , 1995, Robotica.

[19]  William Whittaker,et al.  Energy-Based Stability Measures for Reliable Locomotion of Statically Stable Walkers: Theory and Application , 1994, Int. J. Robotics Res..

[20]  Shin-Min Song,et al.  Dynamic modeling, stability and energy efficiency of a quadrupedal walking machine , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[21]  Nariman Sepehri,et al.  Resolved-Mode Teleoperated Control of Heavy-Duty Hydraulic Machines , 1994 .