An investigative study of the interface heat transfer coefficient for finite element modelling of high-speed machining
暂无分享,去创建一个
Paul Mativenga | Mohammad Sheikh | S A Iqbal | P. Mativenga | S. Iqbal | M. A. Sheikh | P T Mativenga | M. Sheikh
[1] Paul Mativenga,et al. Investigation of heat partition in high speed turning of high strength alloy steel , 2005 .
[2] J. Bos,et al. Frictional heating of tribological contacts , 1995 .
[3] J. K. Lancaster,et al. The formation of surface films at the transition between mild and severe metallic wear , 1963, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.
[4] Wit Grzesik,et al. A computational approach to evaluate temperature and heat partition in machining with multilayer coated tools , 2003 .
[5] Thomas Childs,et al. Metal Machining: Theory and Applications , 2000 .
[6] James Barber,et al. The conduction of heat from sliding solids , 1970 .
[7] Maan Aabid Tawfiq,et al. A Finite Element Analysis of Orthogonal Machining Using Different Tool Edge Geometries , 2007, Engineering and Technology Journal.
[8] Fritz Klocke,et al. 2D-FEM SIMULATION OF THE ORTHOGONAL HIGH SPEED CUTTING PROCESS , 2001 .
[9] John G. Lenard,et al. A study of the heat-transfer coefficient as a function of temperature and pressure , 1994 .
[10] Albert Albers,et al. Contact and thermal analysis of an alumina—steel dry sliding friction pair considering the surface roughness , 2007 .
[11] J. Barber,et al. The Division of Frictional Heat—A Guide to the Nature of Sliding Contact , 1984 .
[12] Taylan Altan,et al. Determination of the Interface Heat Transfer Coefficient for Non-Isothermal Bulk-Forming Processes , 1987 .
[13] A. Devillez,et al. Cutting tool crater wear measurement with white light interferometry , 2004 .
[14] M. Ortiz,et al. Modelling and simulation of high-speed machining , 1995 .
[15] Paul Mativenga,et al. Characterization of machining of AISI 1045 steel over a wide range of cutting speeds. Part 1: Investigation of contact phenomena , 2007 .
[16] V. Goizet,et al. Experimental Study of the Thermal Boundary Condition at the Workpiece-Die Interface during Hot Forging , 1998 .
[17] Taylan Altan,et al. MEASUREMENT AND ANALYSIS OF HEAT-TRANSFER AND FRICTION DURING HOT-FORGING , 1990 .
[18] A. Cameron,et al. Contact temperatures in rolling/sliding surfaces , 1965, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.
[19] T A Dean,et al. The interfacial heat transfer coefficient in hot die forging of titanium alloy , 1998 .
[20] Pedro J. Arrazola,et al. SERRATED CHIP PREDICTION IN FINITE ELEMENT MODELING OF THE CHIP FORMATION PROCESS , 2007 .
[21] Tuğrul Özel,et al. The influence of friction models on finite element simulations of machining , 2006 .
[22] Najib Laraqi,et al. SIMULTANEOUS ESTIMATION OF FRICTIONAL HEAT FLUX AND TWO THERMAL CONTACT PARAMETERS FOR SLIDING CONTACTS , 2004 .
[23] W. R. Wells,et al. Heat Transfer Aspects of Nonisothermal Axisymmetric Upset Forging , 1984 .
[24] G. Rowe,et al. Physics in metal cutting , 1973 .
[25] Leroy S. Fletcher,et al. Thermal Contact Conductance of Non-Flat, Rough, Metallic Coated Metals , 1996, Heat Transfer: Volume 1 — Heat Transfer in Microgravity Systems; Radiative Heat Transfer and Radiative Heat Transfer in Low-Temperature Environments; Thermal Contact Conductance and Inverse Problems in Heat Transfer.
[26] Reginaldo Teixeira Coelho,et al. Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions , 2007 .
[27] Leroy S. Fletcher,et al. Design Graphs for Thermal Contact Conductance of Similar and Dissimilar Light Alloys , 1998 .
[28] W.Y.D. Yuen,et al. Heat conduction in sliding solids , 1988 .
[29] J. Schmidt,et al. 2D FEM estimate of tool wear in turning operation , 2005 .
[30] Taylan Altan,et al. Estimation of tool wear in orthogonal cutting using the finite element analysis , 2004 .
[31] T. Altan,et al. Computer Simulation of Orthogonal Cutting using a Tool with Multiple Coatings , 2004 .
[32] Herbert Schulz,et al. High-Speed Machining , 1992 .
[33] A. Moufki,et al. Numerical modelling of orthogonal cutting: Influence of cutting conditions and separation criterion , 2006 .
[34] Sture Hogmark,et al. Simulation of cutting tool wear by a modified pin-on-disc test , 1989 .
[35] D. O’Sullivan,et al. Temperature measurement in single point turning , 2001 .
[36] Matz Lenner,et al. High Speed Machining , 2001 .
[37] Jack Jeswiet,et al. Evaluation of Temperature and Heat Transfer Conditions at the Metal-Forming Interface , 1995 .
[38] Ward O. Winer,et al. Transient Temperatures in the Vicinity of an Asperity Contact , 1985 .
[39] G. T. Symm,et al. SURFACE TEMPERATURES OF TWO RUBBING BODIES , 1967 .