Compressive Failure due to Kinking of Fibrous Composites

A new approach to compressive strength modeling of fibrous composites, that bridges the micromechanics relevant to compressive failure due to fiber kinking with the global characteristics of a composite structure, is presented in this work. To analyze the mechanics of kinking and calculate the critical compressive stress, a steady state kink propagation model is utilized for the layers under compression in the fiber direction. The proposed model incorporates the influence of boundary conditions, laminate thickness and lay-up configuration, as well as the importance of the micro-geometry. The analysis results are used to gain a better understanding of the influence of the macro-geometry in addition to the micro-geometry and fiber and matrix material properties. The predictions of the model for unidirectional laminates under direct compression and cross-ply laminates under four-point bending are discussed and comparisons with some experimental results for carbon/thermoplastic composites are presented.

[1]  S. L. Pu,et al.  Buckling of Microfibers , 1967 .

[2]  Bernard Budiansky,et al.  Mechanics of materials and material characterizationMicromechanics , 1983 .

[3]  A. M. Waas,et al.  A mechanical model for elastic fiber microbuckling , 1990 .

[4]  S. W. Yurgartis,et al.  A micrographic study of bending failure in five thermoplastic-carbon fibre composite laminates , 1988 .

[5]  Anthony G. Evans,et al.  Kinking as a mode of structural degradation in carbon fiber composites , 1978 .

[6]  G. Sih,et al.  Fracture of Composite Materials , 1980 .

[7]  Norman A. Fleck,et al.  Static Compression Failure of Carbon Fibre T800/924C Composite Plate with a Single Hole , 1990 .

[8]  J. Whitney.  Structural Analysis of Laminated Anisotropic Plates , 1987 .

[9]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[10]  James H. Starnes,et al.  Failure characteristics of graphite-epoxy structural components loaded in compression , 1983 .

[11]  Paul S. Steif,et al.  A model for kinking in fiber composites—I. Fiber breakage via micro-buckling , 1990 .

[12]  H. Saunders,et al.  Introduction to fracture mechanics , 1984 .

[13]  Paul S. Steif,et al.  An exact two-dimensional approach to fiber micro-buckling , 1987 .

[14]  N. J. Pagano,et al.  Further Study of Composite Laminates Under Cylindrical Bending , 1971 .

[15]  D. Lagoudas,et al.  Time evolution of overstress profiles near broken fibers in a composite with a viscoelastic matrix , 1989 .

[16]  Norman A. Fleck,et al.  Hole-hole interaction in carbon fibre/epoxy laminates under uniaxial compression , 1991 .

[17]  H. T. Hahn,et al.  Buckling of a fiber bundle embedded in epoxy , 1986 .

[18]  I. H. Marshall,et al.  Composite Materials Testing and Design , 1987 .

[19]  A. Evans,et al.  Matrix fracture in fiber-reinforced ceramics , 1986 .

[20]  N. Pagano,et al.  Exact Solutions for Composite Laminates in Cylindrical Bending , 1969 .

[21]  C. R. Chaplin,et al.  Compressive fracture in undirectional glass-reinforced plastics , 1977 .

[22]  Dimitris C. Lagoudas,et al.  On the numerical evaluation of Eshelby's tensor and its application to elastoplastic fibrous composites , 1990 .

[23]  Reid R. June,et al.  Compressive Strength of Boron-Epoxy Composites , 1969 .

[24]  Rene B. Testa,et al.  The Elastic Stability of Fibers in a Composite Plate* , 1969 .

[25]  H. Schuerch,et al.  Prediction of compressive strength in uniaxial boron fiber-metal matrix composite materials. , 1966 .

[26]  R. J. Lee.  Compression strength of aligned carbon fibre-reinforced thermoplastic laminates , 1987 .

[27]  Y. Fung.  Foundations of solid mechanics , 1965 .