论文信息 - 3D calculation and modeling of eddy current losses in a large power transformer

3D calculation and modeling of eddy current losses in a large power transformer

Elimination of hot spots and reduction of eddy current losses in structural parts is one of the important constituents of transformer design. In this work, the eddy current losses in the clamping frame, transformer tank and electromagnetic shielding are calculated using a 3D finite element method. The clamping frame, transformer tank and electromagnetic shielding are modeled by surface impedance method. The paper analyses the effects of electromagnetic shielding and magnetic shunts on the eddy current loss reduction in the transformer tank.

M. V. Ferreira da Luz | A. M. Milagre | G. M. Cangane | A. Komar | P. A. Avelino

[1] Janusz Turowski,et al. Non linear Heating Hazard Assessment on Transformer Covers and Tank Walls , 2012 .

[2] Christophe Geuzaine,et al. Analysis of a permanent magnet generator with dual formulations using periodicity conditions and moving band , 2002 .

[3] Janusz Turowski,et al. 3-D methodology for the heating hazard assessment on transformer covers , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[4] G. Meunier,et al. Surface impedance for 3D nonlinear eddy current problems-application to loss computation in transformers , 1996 .

[5] Gérard Meunier,et al. The finite element method for electromagnetic modeling , 2008 .

[6] Zijad Haznadar,et al. Electromagnetic Analysis Applied to the Prediction of Stray Losses in Power Transformer , 2004 .

[7] G. Meunier. The Finite Element Method for Electromagnetic Modeling: Meunier/The Finite , 2010 .

[8] A. Savini,et al. Influence of flux collectors on stray losses in transformers , 2000 .

[9] Zarko Janic,et al. OPTIMISATION OF TRANSFORMER TANK SHIELDS , 2005 .