Nanomechanical properties of nanostructured titanium prepared by SMAT

[1]  M. Troyon,et al.  Critical examination of the two-slope method in nanoindentation , 2005 .

[2]  M. Troyon,et al.  Correction factor for contact area in nanoindentation measurements , 2005 .

[3]  S. Tjong,et al.  Nanocrystalline materials and coatings , 2004 .

[4]  Jian Lu,et al.  Nanostructure formation mechanism of α-titanium using SMAT , 2004 .

[5]  Jian Lu,et al.  Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment , 2004 .

[6]  G. Pharr,et al.  Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology , 2004 .

[7]  Gang Liu,et al.  Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment , 2003 .

[8]  J. Lu,et al.  Nitriding Iron at Lower Temperatures , 2003, Science.

[9]  Jian Lu,et al.  An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment , 2002 .

[10]  M. Troyon,et al.  Fundamental relations used in nanoindentation: Critical examination based on experimental measurements , 2002 .

[11]  Xiaolei Wu,et al.  Microstructure and evolution of mechanically-induced ultrafine grain in surface layer of AL-alloy subjected to USSP , 2002 .

[12]  Warren C. Oliver,et al.  Alternative technique for analyzing instrumented indentation data , 2001 .

[13]  A. Sergueeva,et al.  Advanced Mechanical Properties of Pure Titanium with Ultrafine Grained Structure , 2001 .

[14]  Jian Lu,et al.  Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening , 2000 .

[15]  Jian Lu,et al.  Surface nanocrystallization of iron induced by ultrasonic shot peening , 1999 .

[16]  Zushu Hu,et al.  Evolution of dislocation structure induced by cyclic deformation in a directionally solidified cobalt base superalloy , 1999 .

[17]  George M. Pharr,et al.  Influences of stress on the measurement of mechanical properties using nanoindentation: Part I. Experimental studies in an aluminum alloy , 1996 .

[18]  Alexei Bolshakov,et al.  Influences of stress on the measurement of mechanical properties using nanoindentation: Part II. Finite element simulations , 1996 .

[19]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .