Type Synthesis Principle and Practice of Flexure Systems in the Framework of Screw Theory: Part I—General Methodology

The systematic methodologies involved in type synthesis of flexure systems are no doubt helpful to generate one and more high-performance precision machine designs at the stage of conceptual design with a rapid and effective way. This paper provides a systematic formulation of the type synthesis of parallel, serial, and hybrid flexure systems via a mapping from a geometric concept to physical entity. The whole type synthesis principle is built upon screw system theory and the geometric Freedom and Constraint Topology (FACT) approach, also combining with other concepts and methods including equivalent compliance mapping, building block etc, which enables the type synthesis of flexure systems deterministic, simple and practical. After that, Type synthesis procedure for various flexure systems are elaborated with examples. As a result, as many specified-DOF (Degree of Freedom) flexure systems as possible can be found and therefore pave the way for obtaining an optimal configuration.Copyright © 2010 by ASME

[1]  J. D. Everett.  A Treatise on the Theory of Screws , 1901, Nature.

[2]  J. Paros.  How to design flexure hinges , 1965 .

[3]  K. H. Hunt,et al.  Structural Kinematics of In-Parallel-Actuated Robot-Arms , 1983 .

[4]  Arthur G. Erdman,et al.  Mechanism Design : Analysis and Synthesis , 1984 .

[5]  A. Slocum,et al.  Precision Machine Design , 1992 .

[6]  H. Lipkin,et al.  Structure of Robot Compliance , 1993 .

[7]  Harvey Lipkin,et al.  A Classification of Robot Compliance , 1993 .

[8]  Richard M. Murray,et al.  A Mathematical Introduction to Robotic Manipulation , 1994 .

[9]  A. Midha,et al.  Parametric Deflection Approximations for End-Loaded, Large-Deflection Beams in Compliant Mechanisms , 1995 .

[10]  G. K. Ananthasuresh,et al.  Designing compliant mechanisms , 1995 .

[11]  Mary Frecker,et al.  Topological synthesis of compliant mechanisms using multi-criteria optimization , 1997 .

[12]  J. M. Hervé.  The Lie group of rigid body displacements, a fundamental tool for mechanism design , 1999 .

[13]  Hong-Sen Yan,et al.  Creative Design of Mechanical Devices , 1999 .

[14]  Sridhar Kota,et al.  An Energy Formulation for Parametric Size and Shape Optimization of Compliant Mechanisms , 1999 .

[15]  Lung-Wen Tsai,et al.  Mechanism Design: Enumeration of Kinematic Structures According to Function , 2001 .

[16]  Shilong Zhang,et al.  A Finite-Element-Based Method to Determine the Spatial Stiffness Properties of a Notch Hinge , 2001 .

[17]  X. Ding,et al.  A screw theory of static beams , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[18]  Ding,et al.  ANALYSIS OF SPATIAL COMPLIANCE BEHAVIOR OF COILED SPRINGS VIA SCREW THEORY , 2002 .

[19]  Andrew J. Hazelton,et al.  Flexures: elements of elastic mechanisms: Stuart T. Smith; Gordon and Breach Science Publishers, 2000, 448 pages, illustrated, ISBN 90–5699-261–9 (US$75.00) , 2002 .

[20]  Sridhar Kota,et al.  Biomimetic Compliant System for Smart Actuator-Driven Aquatic Propulsion: Preliminary Results , 2003 .

[21]  Z. Huang,et al.  Type Synthesis of Symmetrical Lower-Mobility Parallel Mechanisms Using the Constraint-Synthesis Method , 2003, Int. J. Robotics Res..

[22]  Qiong Jin,et al.  Theory for Topology Synthesis of Parallel Manipulators and Its Application to Three-Dimension-Translation Parallel Manipulators , 2004 .

[23]  Philippe Bidaud,et al.  A new compliant mechanism design methodology based on flexible building blocks , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[24]  J. Angeles.  The Qualitative Synthesis of Parallel Manipulators , 2004 .

[25]  Zong Guanghua,et al.  Design of a 6-DOF compliant manipulator based on serial-parallel architecture , 2005, Proceedings, 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics..

[26]  Yong Mo Moon,et al.  DESIGN OF LARGE-DISPLACEMENT COMPLIANT JOINTS , 2005 .

[27]  Larry L. Howell,et al.  A compliant contact-aided revolute joint , 2005 .

[28]  Michael Yu Wang,et al.  Design of multimaterial compliant mechanisms using level-set methods , 2005 .

[29]  Charles J. Kim,et al.  A conceptual approach to the computational synthesis of compliant mechanisms. , 2005 .

[30]  Kwun-Lon Ting,et al.  Topological Synthesis of Compliant Mechanisms Using Spanning Tree Theory , 2005 .

[31]  Lining Sun,et al.  Conceptional Design and Kinematics Modeling of a Wide-Range Flexure Hinge-Based Parallel Manipulator , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[32]  Patrick V. Hull,et al.  Optimal synthesis of compliant mechanisms using subdivision and commercial FEA , 2006 .

[33]  Jian S. Dai,et al.  Compliance Analysis of a Three-Legged Rigidly-Connected Platform Device , 2006 .

[34]  Jian S. Dai,et al.  Mobility Characteristics of a Flexure-based Compliant Manipulator with Three Legs , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[35]  Shorya Awtar,et al.  Constraint-based design of parallel kinematic XY flexure mechanisms , 2007 .

[36]  Xianwen Kong,et al.  Type Synthesis of Parallel Mechanisms , 2010, Springer Tracts in Advanced Robotics.

[37]  Shorya Awtar,et al.  Characteristics of Beam-Based Flexure Modules , 2007 .

[38]  Patric Pham.  Design of hybrid-kinematic mechanisms for machine tools , 2009 .

[39]  J. M. Selig,et al.  A Screw Theory of Timoshenko Beams , 2009 .

[40]  Judy M. Vance,et al.  A Screw Theory Approach for the Conceptual Design of Flexible Joints for Compliant Mechanisms , 2009 .

[41]  Jonathan B. Hopkins,et al.  Synthesis of multi-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT). Part II: Practice , 2010 .

[42]  James Clerk Maxwell,et al.  General considerations concerning Scientific Apparatus , 2011 .