Fracture load and failure types of different veneered polyetheretherketone fixed dental prostheses

[1]  D. Edelhoff,et al.  Effect of different surface pretreatments and adhesives on the load-bearing capacity of veneered 3-unit PEEK FDPs. , 2015, The Journal of prosthetic dentistry.

[2]  B. Mickey,et al.  Computed-tomography modeled polyether ether ketone (PEEK) implants in revision cranioplasty. , 2015, Journal of Plastic, Reconstructive & Aesthetic Surgery.

[3]  D. Edelhoff,et al.  Three-unit reinforced polyetheretherketone composite FDPs: influence of fabrication method on load-bearing capacity and failure types. , 2015, Dental materials journal.

[4]  M. Roos,et al.  The effect of surface modification on the retention strength of polyetheretherketone crowns adhesively bonded to dentin abutments. , 2014, The Journal of prosthetic dentistry.

[5]  M. Roos,et al.  PEEK surface treatment effects on tensile bond strength to veneering resins. , 2014, The Journal of prosthetic dentistry.

[6]  M. Roos,et al.  Work of adhesion between resin composite cements and PEEK as a function of etching duration with sulfuric acid and its correlation with bond strength values , 2014 .

[7]  M. Roos,et al.  Effect of sulfuric acid etching of polyetheretherketone on the shear bond strength to resin cements. , 2014, The journal of adhesive dentistry.

[8]  Carola Kolbeck,et al.  Shear bond strength between veneering composite and PEEK after different surface modifications , 2014, Clinical Oral Investigations.

[9]  M. Roos,et al.  Influence of PEEK surface modification on surface properties and bond strength to veneering resin composites. , 2014, The journal of adhesive dentistry.

[10]  C. Scheiwe,et al.  PEEK Cages versus PMMA Spacers in Anterior Cervical Discectomy: Comparison of Fusion, Subsidence, Sagittal Alignment, and Clinical Outcome with a Minimum 1-Year Follow-Up , 2014, TheScientificWorldJournal.

[11]  T. Mathia,et al.  Surface morphology and wettability of sandblasted PEEK and its composites. , 2014, Scanning.

[12]  Andreas Schwitalla,et al.  PEEK dental implants: a review of the literature. , 2013, The Journal of oral implantology.

[13]  Malgorzata Roos,et al.  Polyetheretherketone-a suitable material for fixed dental prostheses? , 2013, Journal of biomedical materials research. Part B, Applied biomaterials.

[14]  D. Edelhoff,et al.  Impact of plasma treatment of PMMA-based CAD/CAM blanks on surface properties as well as on adhesion to self-adhesive resin composite cements. , 2013, Dental materials : official publication of the Academy of Dental Materials.

[15]  M. Roos,et al.  Tensile bond strength of veneering resins to PEEK: impact of different adhesives. , 2013, Dental materials journal.

[16]  P. Schmidlin,et al.  Influence of plasma pretreatment on shear bond strength of self-adhesive resin cements to polyetheretherketone , 2013, Clinical Oral Investigations.

[17]  M. Kern,et al.  Influence of surface conditioning on bonding to polyetheretherketon (PEEK). , 2012, Dental materials : official publication of the Academy of Dental Materials.

[18]  A. Mehl,et al.  The improvement of adhesive properties of PEEK through different pre-treatments , 2012 .

[19]  C. Hämmerle,et al.  Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: Effect of aging regimens , 2012, Clinical Oral Investigations.

[20]  Marco Wieland,et al.  Effect of different surface pre-treatments and luting materials on shear bond strength to PEEK. , 2010, Dental materials : official publication of the Academy of Dental Materials.

[21]  S. Kurtz,et al.  PEEK biomaterials in trauma, orthopedic, and spinal implants. , 2007, Biomaterials.

[22]  A. Turner,et al.  Polyetheretherketone as a biomaterial for spinal applications. , 2006, Biomaterials.

[23]  G E Carlsson,et al.  Bite force and state of dentition. , 1977, Acta odontologica Scandinavica.