Plastic η-factor (ηp)

[1]  Y. Mai,et al.  Plastic Rotation Factors of Three-Point Bend and Compact Tension Specimens , 1988 .

[2]  Y. Mai,et al.  Slip-line field solutions for three-point notch-bend specimens , 1988 .

[3]  Y. Mai,et al.  ON THE EFFECT OF PLASTIC CONSTRAINT ON DUCTILE TEARING IN A STRUCTURAL STEEL - AWRA CONTRACT 93, AWRA DOCUMENT P4-30-83 , 1983 .

[4]  Kumar,et al.  Engineering approach for elastic-plastic fracture analysis , 1981 .

[5]  John W. Hutchinson,et al.  Fully plastic crack problems: The center-cracked strip under plane strain , 1975 .

[6]  John G. Merkle,et al.  A J Integral Analysis for the Compact Specimen, Considering Axial Force as Well as Bending Effects , 1974 .

[7]  H. Liebowitz,et al.  On nonlinear effects in fracture mechanics , 1971 .

[8]  D. Ewing,et al.  Calculations on the bending of rigid/plastic notched bars , 1968 .

[9]  R. Hill,et al.  The plastic constraint of V-notched tension bars , 1967 .

[10]  A. P. Green The plastic yielding of shallow notched bars due to bending , 1956 .

[11]  B. B. Hundy,et al.  Initial plastic yielding in notch bend tests , 1956 .

[12]  Yiu-Wing Mai,et al.  Slip-line field solutions of three-point bend specimens with deep notches , 1987 .

[13]  Y. Mai,et al.  The effect of shallow cracks on crack tip opening displacement , 1986 .

[14]  S. Garwood,et al.  Influence of Crack Depth on Resistance Curves for Three-Point Bend Specimens in HY130 , 1986 .

[15]  C. M. Chang,et al.  A new method of determining of steel by means of single specimen , 1983 .

[16]  Pc Paris,et al.  A J-Integral Approach to Development of η -Factors , 1980 .

[17]  B. Dodd,et al.  Effect of deep wedge-shaped notches of small flank angle on plastic failure , 1980 .

[18]  C. Turner,et al.  The Ubiquitous η Factor , 1980 .

[19]  C. E. Richards,et al.  The yield-point loads of singly-notched pin-loaded tensile strips , 1974 .

[20]  John R. Rice,et al.  Some further results of J-integral analysis and estimates. , 1973 .

[21]  J. L. Swedlow,et al.  The surface crack : physical problems and computational solutions : presented at the winter annual meeting of the American Society of Mechanical Engineers, New York, November 26-30, 1972 , 1972 .