Effect of the hub endwall cavity flow on the flow-field of a transonic high-pressure turbine

In high-pressure turbines, a small amount of cold flow is ejected at the hub from the cavity that exists between the stator and the rotor disk. This prevents the ingestion of hot gases into the wheel-space cavity, thus avoiding possible damage. This paper analyzes the interaction between the hub-endwall cavity flow and the mainstream in a high-pressure transonic turbine stage. Several cooling flow ratios are investigated under engine representative conditions. Both time-averaged and time-resolved data are presented. The experimental data is successfully compared with the results of a three-dimensional steady Navier-Stokes computation. Despite the small amount of gas ejected, the hub-endwall cavity flow has a significant influence on the mainstream flow. The Navier-Stokes predictions show how the ejected cold flow is entrained by the rotor hub vortex, The time-resolved static pressure field around the rotor is greatly affected when traversing the non-uniform vane exit flow field. When the cavity flow rate is increased, the unsteady forces on the rotor airfoil are reduced. This is linked to the decrease of vane exit Mach number caused by the blockage of the ejected flow.

[1]  Andrea Arnone,et al.  THREE-DIMENSIONAL NAVIER-STOKES ANALYSIS OF A TWO-STAGE GAS TURBINE , 1994 .

[2]  Dieter Peitsch,et al.  Numerical Study of Hot Gas Ingestion Into an Engine Type High-Pressure Turbine Rotor-Stator Cavity , 2001 .

[3]  D. L. Rhode,et al.  Thermal Details in a Rotor–Stator Cavity at Engine Conditions With a Mainstream , 1992 .

[4]  Guillermo Paniagua,et al.  Steady Three-Dimensional Simulation of a Transonic Axial Turbine Stage , 2001 .

[5]  Cengiz Camci,et al.  Mainstream Aerodynamic Effects Due to Wheelspace Coolant Injection in a High-Pressure Turbine Stage: Part I—Aerodynamic Measurements in the Stationary Frame , 2001 .

[6]  Nicholas J. Hills,et al.  Measurement and Analysis of Ingestion Through a Turbine Rim Seal , 2003 .

[7]  P. de la Calzada,et al.  Investigation of Numerical and Physical Modelling Effects on the CFD Simulation of the Unsteady Flow in a HPT Stage , 2003 .

[8]  Bruce M. Steinetz,et al.  Engine seal technology requirements to meet NASA's Advanced Subsonic Technology program goals , 1994 .

[9]  G. Paniagua,et al.  Influence of the Hub Endwall Cavity Flow on the Time-Averaged and Time-Resolved Aero-Thermodynamics of an Axial HP Turbine Stage , 2002 .

[10]  Tony Arts,et al.  The VKI Compression Tube Annular Cascade Facility CT3 , 1992 .

[11]  S. H. Moustapha,et al.  The Effect of Secondary Air Injection on the Performance of a Transonic Turbine Stage , 2002 .

[12]  Michael G. Dunn,et al.  Convective Heat Transfer and Aerodynamics in Axial Flow Turbines , 2001 .

[13]  Torsten Fransson,et al.  Investigation of the Flowfield in the Transonic VKI BRITE EURAM Turbine Stage With 3D Steady and Unsteady N-S Computations , 2000 .

[14]  W. A. Daniels,et al.  Rim Seal Experiments and Analysis for Turbine Applications , 1990 .

[15]  John W. Chew,et al.  Rim sealing of rotor-stator wheelspaces in the presence of external flow , 1991 .

[16]  E. Laroche,et al.  A Combined Experimental and Numerical Investigation of the Flow in a Heated Rotor/Stator Cavity, With a Radial Inflow , 1999 .

[18]  Torsten Fransson,et al.  Investigation of the Spanwise Transport of the Rotor – Stator Slot Flow in a Test Turbine , 2000 .

[19]  A. B. Turner,et al.  Performance of Radial Clearance Rim Seals in Upstream and Downstream Rotor–Stator Wheelspaces , 1992 .

[20]  M. Shizuya,et al.  An Experimental Investigation of a Gas Turbine Disk Cooling System , 1984 .

[21]  U. P. Phadke,et al.  Aerodynamic aspects of the sealing of gas-turbine rotor-stator systems , 1988 .

[22]  U. P. Phadke,et al.  Aerodynamic aspects of the sealing of gas-turbine rotor-stator systems: Part 3: The effect of nonaxisymmetric external flow on seal performance , 1988 .

[23]  Steven R. Manwaring,et al.  Endwall Cavity Flow Effects on Gaspath Aerodynamics in an Axial Flow Turbine: Part I — Experimental and Numerical Investigation , 2000 .

[24]  Dieter Bohn,et al.  Experimental and Theoretical Investigations of Heat Transfer in Closed Gas-Filled Rotating Annuli , 1993 .

[25]  R. P. Roy,et al.  Pressure Field and Main-Stream Gas Ingestion in a Rotor-Stator Disk Cavity , 2001 .