Fuel cells multi-stack power architectures and experimental validation of 1 kW parallel twin stack PEFC generator based on high frequency magnetic coupling dedicated to on board power unit

Abstract This paper presents a study of a polymer electrolyte fuel cell (PEFC) multi-stack generator and its power electronic interface dedicated to an on board vehicle power unit. A parallel electric architecture has been designed and tested. First, a dynamic model of the PEFC stack, valid for high frequencies and compatible with power converter interactions, has been developed. This model is used for simulations of the global fuel cell and power converter behaviors. Second, an inventory of generic multi-stack fuel cells architectures is presented in order to couple electrically the fuel cell stacks to an on board DC bus (in series, parallel, through magnetic coupling…). This state of the art is completed by an overview of several candidate power converter topologies for fuel cells. Then, among all the possible technical solutions, an original power converter architecture using a high frequency planar transformer is proposed, which allows parallel and series magnetic couplings of two fuel cell stacks. Then, the study focuses on a first step, which is the association of two PEFC stacks. Such a structure, having good efficiency, is well adapted for testing and operation of fuel cells in normal and degraded working modes, which correspond to real constraints on board a vehicle. Finally, experimental validations on a 2 × 500 W twin stack PEFC with power converter interface demonstrate the technological feasibility for the embarked multi-stack fuel cells generator. The 1 kW power level chosen for the experimentation is close to that of a small on board PEFC auxiliary power unit (APU).

[1]  Slobodan Cuk A new zero-ripple switching dc-to-dc converter and integrated magnetics , 1980, 1980 IEEE Power Electronics Specialists Conference.

[2]  A.C. Rufer,et al.  An Analytical, Control-Oriented State Space Model for a PEM Fuel Cell System , 2007, 2007 Power Conversion Conference - Nagoya.

[3]  Fujio Kurokawa,et al.  Characteristics of the multiple-input DC-DC converter , 2004, IEEE Transactions on Industrial Electronics.

[4]  B. Davat,et al.  Design of a High Power, High Step-Up Non-isolated DC-DC Converter for Fuel Cell applications , 2006, 2006 IEEE Vehicle Power and Propulsion Conference.

[5]  Zhong Du,et al.  Integrating multiple solid oxide fuel cell modules , 2003, IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No.03CH37468).

[6]  Geoffrey R. Walker,et al.  Multi-converter topology evaluation for connection of low voltage DC sources , 2001 .

[7]  T. Nguyen,et al.  An Along‐the‐Channel Model for Proton Exchange Membrane Fuel Cells , 1998 .

[8]  Zhong Du,et al.  Multiple input converters for fuel cells , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[9]  V. Ramanarayanan,et al.  Polyphase boost converter for automotive and UPF applications , 2005, 2005 European Conference on Power Electronics and Applications.

[10]  J.M. Kauffmann,et al.  High frequency power converter for PEFC generator architecture based on a multi stacks association for transportation applications , 2005, 2005 European Conference on Power Electronics and Applications.

[11]  P.N. Enjeti,et al.  Development of an equivalent circuit model of a fuel cell to evaluate the effects of inverter ripple current , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[12]  Y. Bultel,et al.  Modeling impedance diagrams of active layers in gas diffusion electrodes: diffusion, ohmic drop effects and multistep reactions , 2002 .

[13]  P. Thounthong,et al.  Test of a PEM fuel cell with low voltage static converter , 2006 .

[14]  D. Candusso,et al.  PEMFC Durability Test under Specific Dynamic Current Solicitation, Linked to a Vehicle Road Cycle , 2007 .

[15]  Denis Candusso,et al.  Study of a PEFC power generator modular architecture based on a multi-stack association , 2006 .

[16]  Slobodan Cuk,et al.  A new optimum topology switching DC-to-DC converter , 1977, 1977 IEEE Power Electronics Specialists Conference.

[17]  J.M. Kauffmann,et al.  Dynamic PEM fuel cell modeling for automotive applications , 2003, 2003 IEEE 58th Vehicular Technology Conference. VTC 2003-Fall (IEEE Cat. No.03CH37484).

[18]  Jean-Paul Diard,et al.  Exercices de cinétique électrochimique : II. Méthode d'impédance Exercices corrigés , 2005 .

[19]  Thierry Meynard,et al.  Interactions between fuel cells and power converters influence of current harmonics on a fuel cell stack , 2004, PESC 2004.

[20]  F. Profumo,et al.  Fuel Cells for Electric Power Generation: Peculiarities and Dedicated Solutions for Power Electronic Conditioning Systems , 2004 .

[21]  G. Coquery,et al.  Dynamic behavior of a proton exchange membrane fuel cell under transportation cycle load , 2004, 2004 IEEE International Symposium on Industrial Electronics.

[22]  Phatiphat Thounthong,et al.  Behaviour of a PEMFC supplying a low voltage static converter , 2006 .

[23]  P. Rodatz,et al.  Operational aspects of a large PEFC stack under practical conditions , 2004 .