The mechanical, hygral, and interfacial strength of continuous bamboo fiber reinforced epoxy composites

Abstract This study is to investigate the mechanical, hygral, and interfacial strength of continuous bamboo fiber reinforced epoxy composites. The untreated and alkali-treated continuous bamboo fibers were prepared from cutting the nature bamboo culm. The basic characteristics of the bamboo fibers, such as density, equivalent diameter, and tensile properties were experimentally measured. The bamboo fiber reinforced epoxy (BF/EP) composites were fabricated by the resin transfer molding (RTM) process with the resulting fiber volume fraction about 42%. The strength of bamboo fiber was found to decrease with the alkaline treatment. However, alkali-treated bamboo fiber reinforced epoxy composites acquired better tensile strength than those with untreated bamboo fibers. The untreated bamboo fiber was believed to have weak interface with the epoxy resin, which was verified by the subsequent interface strength tests. The size effect of bamboo fibers on the tensile properties of the BF/EP composites were also studied. The results showed that the tensile strength and Young's modulus of the composite increase with the decrease of the bamboo fiber diameter. For the hygrothermal aging test, BF/EP composites are highly sensitive to moisture absorption, and the moisture has a detrimental effect on the mechanical properties of the BF/EP composite.

[1]  John Hobson,et al.  Targets for bio-based composites and natural fibres , 2011 .

[2]  L. Greszczuk.  Theoretical Studies of the Mechanics of the Fiber-Matrix Interface in Composites , 1969 .

[3]  W. Jordan,et al.  Improving the Properties of Banana Fiber Reinforced Polymeric Composites by Treating the Fibers , 2017 .

[4]  P. Perré,et al.  Effects of wood fiber surface chemistry on strength of wood–plastic composites , 2015 .

[5]  E. Thostenson,et al.  Multi-scale hybrid biocomposite: Processing and mechanical characterization of bamboo fiber reinforced PLA with microfibrillated cellulose , 2009 .

[6]  A. Cenna,et al.  Physical and mechanical properties of jute, bamboo and coir natural fiber , 2013, Fibers and Polymers.

[7]  C. Lakshmana Rao,et al.  Extraction of bamboo fibers and their use as reinforcement in polymeric composites , 2000 .

[8]  Xiaodong Li,et al.  Nanoscale structural and mechanical characterization of the cell wall of bamboo fibers , 2009 .

[9]  P. Chang,et al.  Bamboo fiber and its reinforced composites: structure and properties , 2012, Cellulose.

[10]  Hongyun Luo,et al.  Water effects on the deformation and fracture behaviors of the multi-scaled cellular fibrous bamboo. , 2018, Acta biomaterialia.

[11]  Hitoshi Takagi,et al.  Strength evaluation of cross-ply green composite laminates reinforced by bamboo fiber , 2016 .

[12]  R. Gibson.  Principles of Composite Material Mechanics , 1994 .

[13]  I. Low,et al.  Mechanical properties and water absorption behaviour of recycled cellulose fibre reinforced epoxy composites , 2012 .

[14]  H. Bader,et al.  Influence of natural fibres on the mechanical properties of biodegradable polymers. , 1998 .

[15]  K. Okubo,et al.  Influence of fiber extraction and surface modification on mechanical properties of green composites with bamboo fiber , 2013 .

[16]  N. Phong,et al.  Study on How to Effectively Extract Bamboo Fibers from Raw Bamboo and Wastewater Treatment , 2011 .

[17]  Libo Yan,et al.  Flax fibre and its composites – A review , 2014 .

[18]  G. Sastry,et al.  An Overview of Lignin & Hemicellulose Effect Upon Biodegradable Bamboo Fiber Composites Due to Moisture , 2017 .

[19]  Joseph D. Bronzino,et al.  The Biomedical Engineering Handbook , 1995 .

[20]  V. Gupta,et al.  Tensile properties of sisal fiber/recycled polyethylene (high density) composite: Effect of fiber chemical treatment , 2018 .

[21]  V. Singh,et al.  Fabrication and Study of Mechanical Properties of Bamboo Fibre Reinforced Bio-Composites , 2015 .

[22]  Z. Ishak,et al.  Effects of hygrothermal aging and a silane coupling agent on the tensile properties of injection molded short glass fiber reinforced poly(butylene terephthalate) composites , 2001 .

[23]  Zhongyi Zhang,et al.  Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites , 2007 .

[24]  Rakesh Kumar,et al.  Influence of Pre-Impregnation Treatment on Bamboo Reinforced Epoxy/UPE Resin Composites , 2012 .

[25]  M. John,et al.  Recent Developments in Chemical Modification and Characterization of Natural Fiber-Reinforced Composites , 2008 .

[26]  K. M. M. Rao,et al.  Extraction and tensile properties of natural fibers : Vakka, date and bamboo , 2007 .

[27]  D. L. Majid,et al.  Extraction and preparation of bamboo fibre-reinforced composites , 2014 .

[28]  I. Low,et al.  Synthesis and characterization of mechanical properties in cotton fiber-reinforced geopolymer composites , 2013 .

[29]  B. F. Yousif,et al.  Fracture behaviour of bamboo fiber reinforced epoxy composites , 2017 .

[30]  S. Kalia,et al.  Pretreatments of Natural Fibers and their Application as Reinforcing Material in Polymer Composites—A Review , 2009 .

[31]  L. Feo,et al.  Plasma surface modification and bonding enhancement for bamboo composites , 2018 .

[32]  Rakesh Kumar,et al.  Mechanical behaviour of bamboo and bamboo composite , 1992 .

[33]  W. Zhong,et al.  A plant fiber reinforced polymer composite prepared by a twin-screw extruder. , 2009, Bioresource technology.

[34]  Kazuya Okubo,et al.  Development of bamboo-based polymer composites and their mechanical properties , 2004 .

[35]  Yang Lu,et al.  An atomistic study on the mechanical behavior of bamboo cell wall constituents , 2018, Composites Part B: Engineering.

[36]  R. Sinke,et al.  Natural fibre reinforced sheet moulding compound , 2001 .