Degradation of polydispersed poly(L-lactic acid) to modulate lactic acid release.

Polydispersed poly(L-lactic acid) (PLLA) membranes comprised of blends of monodispersed PLLA of weight average molecular weight of 82,500 and 7600 were fabricated to investigate the effect of polydispersity on degradation characteristics. The PLLA blends exhibited large spherulites of high molecular weight chains embedded in a low molecular weight matrix. During degradation in phosphate buffer at pH 7.4 and 37 degrees C for 28 d, the release rate of lactic acid increased as the percentage of the low molecular weight component in the blend was increased. For low molecular weight compositions larger than 50%, voids were created in the degrading blends due to the degradation of low molecular weight chains and the concurrent dissolution of lactic acid, and also the release of undegraded particles of high molecular weight. These studies demonstrate the feasibility of modulating lactic acid release during in vivo degradation of PLLA implants by adjusting the polymer polydispersity.

[1]  J. Kohn,et al.  Physico-mechanical properties of degradable polymers used in medical applications: a comparative study. , 1991, Biomaterials.

[2]  Ross R. Muth,et al.  Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1 , 1979 .

[3]  B. Benicewicz,et al.  Polymers for absorbable surgical sutures. II , 1990 .

[4]  D Amiel,et al.  The use of polylactic acid matrix and periosteal grafts for the reconstruction of rabbit knee articular defects. , 1991, Journal of biomedical materials research.

[5]  R. Bodmeier,et al.  The effect of the addition of low molecular weight poly(dl-lactide) on drug release from biodegradable poly(dl-lactide) drug delivery systems , 1989 .

[6]  Yoshito Ikada,et al.  Thermal characterization of polylactides , 1988 .

[7]  G. Boering,et al.  Resorbable materials of poly(L-lactide). VI. Plates and screws for internal fracture fixation. , 1987, Biomaterials.

[8]  Harold Alexander,et al.  Biological response of intramedullary bone to poly‐L‐lactic acid , 1993 .

[9]  Brian C. Benicewicz,et al.  Review : Polymers for Absorbable Surgical Sutures—Part II , 1990 .

[10]  J Mühling,et al.  Poly(L-lactide): a long-term degradation study in vivo. I. Biological results. , 1993, Biomaterials.

[11]  J. Vacanti,et al.  Transplantation of enterocytes utilizing polymer-cell constructs to produce a neointestine. , 1992, Transplantation proceedings.

[12]  D E Ingber,et al.  Hepatocyte culture on biodegradable polymeric substrates , 1991, Biotechnology and bioengineering.

[13]  C. G. Pitt,et al.  The biodegradability of polyester blends. , 1990, Biomaterials.

[14]  R Langer,et al.  Neocartilage formation in vitro and in vivo using cells cultured on synthetic biodegradable polymers. , 1993, Journal of biomedical materials research.

[15]  J Mühling,et al.  Poly(L-lactide): a long-term degradation study in vivo. Part III. Analytical characterization. , 1993, Biomaterials.

[16]  D. Ingber,et al.  Prevascularization of porous biodegradable polymers , 1993, Biotechnology and bioengineering.

[17]  D. K. Gilding,et al.  A monomer feed system for producing narrow composition range copolymers from comonomers of widely differing reactivities , 1981 .

[18]  A. M. Reed,et al.  Biodegradable polymers for use in surgery — poly(glycolic)/poly(Iactic acid) homo and copolymers: 2. In vitro degradation , 1981 .

[19]  Michel Vert,et al.  In vivo degradation of massive poly(α-hydroxy acids): Validation of In vitro findings , 1992 .

[20]  Brian J. Tighe,et al.  Polymers for biodegradable medical devices. 1. The potential of polyesters as controlled macromolecular release systems , 1986 .

[21]  A. Schindler,et al.  Polylactide. II. Viscosity–molecular weight relationships and unperturbed chain dimensions , 1979 .