Efficiency improvement of blended poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 solar cells by nanoimprinting

This work demonstrates the effects of nanoimprinting on poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 (P3HT:PCBM)-blended organic solar cells at room temperature. Textured Si wafer was used as a stamp. Nanoimprinting significantly increased the open-circuit voltage, the short-circuit current, and the fill factor, increasing the power conversion efficiency by ∼50%. The fill factor contributed most to the cell efficiency. Upon nanoimprinting, not only the surface structure but also the applied pressure contributed to the performance of the device. The origin of the hydrostatic pressure-induced efficiency improvement was also investigated. The proposed approach has potential to be applied in the future to improve the efficiency of various organic solar cells.

[1]  Mukti Aryal,et al.  Imprinted large-scale high density polymer nanopillars for organic solar cells , 2008 .

[2]  I. Alexandrou,et al.  Optical properties of conjugated poly(3-hexylthiophene)/[6,6]-phenylC61-butyric acid methyl ester composites , 2007 .

[3]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[4]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[5]  R. Hatton,et al.  Nanoimprinted large area heterojunction pentacene-C60 photovoltaic device , 2007 .

[6]  Fang‐Chung Chen,et al.  Submicron-scale manipulation of phase separation in organic solar cells , 2008 .

[7]  Z. Rang,et al.  Hydrostatic-pressure dependence of the photoconductivity of single-crystal pentacene and tetracene , 2001 .

[8]  Takhee Lee,et al.  Surface relief gratings on poly(3-hexylthiophene) and fullerene blends for efficient organic solar cells , 2007 .

[9]  Yong Cao,et al.  High-efficiency polymer photovoltaic devices from regioregular-poly(3-hexylthiophene-2,5-diyl) and [6,6]-phenyl-C61-butyric acid methyl ester processed with oleic acid surfactant , 2007 .

[10]  Xiaoniu Yang,et al.  Scanning near-field and confocal Raman microscopic investigation of P3HT-PCBM systems for solar cell applications , 2006 .

[11]  D. Dissanayake,et al.  Enhanced photovoltaic performance in nanoimprinted pentacene-PbS nanocrystal hybrid device , 2008 .

[12]  G. Bazan,et al.  Insight into the Raman shifts and optical absorption changes upon annealing polymer/fullerene solar cells , 2008 .

[13]  Stephen R. Forrest,et al.  Efficient bulk heterojunction photovoltaic cells using small-molecular-weight organic thin films , 2003, Nature.