A String of Tethered Drones - System Dynamics and Control

In this paper we present a novel concept of a tethered-drones system. The system includes an arbitrary number of drones connected serially to an active ground station. The considered drones are of quadrotor type. Utilizing a unique pulley-gimbal mechanism, each drone can freely move along the tether and its position is measured with respect to the ground station without the use of standard onboard inertial sensors. The proposed system can be thought of as a robotic arm where each tether section acts as a variable-length link and each drone is a joint actuator. We model the coupled behavior of the ground station and the string, taking into account an arbitrary number of drones. Then, a controller that combines tools from geometric-control and linear-control is suggested. Finally, the concept is demonstrated using numerical simulations, which also illustrate its potential effectiveness.

[1]  Nam Vo.  Nonlinear Geometric Control of a Quadrotor with a Cable-Suspended Load , 2017 .

[2]  Raffaello D'Andrea,et al.  Stabilization of a flying vehicle on a taut tether using inertial sensing , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[3]  Petru Dobra,et al.  Nonlinear Model and Trajectory Control of A Novel VTOL Vehicle II , 2018, 2018 International Conference on Unmanned Aircraft Systems (ICUAS).

[4]  Taeyoung Lee,et al.  Control of Complex Maneuvers for a Quadrotor UAV using Geometric Methods on SE(3) , 2010, ArXiv.

[5]  Taeyoung Lee,et al.  Optimal hybrid controls for global exponential tracking on the two-sphere , 2016, 2016 IEEE 55th Conference on Decision and Control (CDC).

[6]  M. Cwikel,et al.  Admissible sets and feedback control for discrete-time linear dynamical systems with bounded controls and states , 1984 .

[7]  Frederick A. Leve,et al.  Spacecraft relative attitude formation tracking on SO(3) based on line-of-sight measurements , 2013, 2013 American Control Conference.

[8]  Seiga Kiribayashi,et al.  Modeling and design of tether powered multicopter , 2015, 2015 IEEE International Symposium on Safety, Security, and Rescue Robotics (SSRR).

[9]  Marco Tognon.  Attitude and Tension Control of a Tethered Formation of Aerial Vehicles , 2014 .

[10]  Shai Arogeti,et al.  Control of Tethered Drones with state and input Constraints - a Unified Model Approach , 2018, 2018 International Conference on Unmanned Aircraft Systems (ICUAS).

[11]  Emanuele Garone,et al.  Nonlinear control of a tethered UAV: The taut cable case , 2017, Autom..

[12]  Mangal Kothari,et al.  A Novel Fully Quaternion based Nonlinear Attitude and Position Controller , 2018 .

[13]  Taeyoung Lee,et al.  Geometric controls for a tethered quadrotor UAV , 2015, 2015 54th IEEE Conference on Decision and Control (CDC).

[14]  Lorenzo Fagiano,et al.  Systems of Tethered Multicopters: Modeling and Control Design , 2017 .