Thermohydraulics of turbulent flow through rectangular and square ducts with axial corrugation roughness and twisted-tapes with and without oblique teeth

Abstract The heat transfer and the pressure drop characteristics of turbulent flow of air (10,000

[1]  A. W. Date,et al.  Prediction of fully-developed flow in a tube containing a twisted-tape , 1974 .

[2]  V. Zimparov,et al.  Prediction of friction factors and heat transfer coefficients for turbulent flow in corrugated tubes combined with twisted tape inserts. Part 1: friction factors , 2004 .

[3]  V. Zimparov,et al.  Enhancement of heat transfer by a combination of three-start spirally corrugated tubes with a twisted tape , 2001 .

[4]  Palani Sivashanmugam,et al.  Heat transfer and pressure drop studies in a circular tube fitted with straight full twist , 2009 .

[5]  A. B. de Haan,et al.  Novel spacers for mass transfer enhancement in membrane separations , 2005 .

[6]  V. Zimparov.  Prediction of friction factors and heat transfer coefficients for turbulent flow in corrugated tubes combined with twisted tape inserts. Part 2: heat transfer coefficients , 2004 .

[7]  Cyrus K. Aidun,et al.  Experimental investigation of the swirling flow and the helical vortices induced by a twisted tape inside a circular pipe , 2009 .

[8]  Anupam Dewan,et al.  Review of passive heat transfer augmentation techniques , 2004 .

[9]  S. Suresh,et al.  Experimental studies on heat transfer and friction factor characteristics of laminar flow through a circular tube fitted with helical screw-tape inserts , 2006 .

[10]  W. Focke,et al.  The effect of the corrugation inclination angle on the thermohydraulic performance of plate heat exchangers , 1985 .

[11]  A. Bergles,et al.  PERFORMANCE EVALUATION CRITERIA FOR ENHANCED HEAT TRANSFER SURFACES , 1974 .

[12]  R. Thorsen,et al.  Friction and Heat Transfer Characteristics in Turbulent Swirl Flow Subjected to Large Transverse Temperature Gradients , 1968 .

[13]  K. N. Sheeba,et al.  Experimental studies on heat transfer and friction factor characteristics of thermosyphon solar water heater system fitted with spacer at the trailing edge of twisted tapes , 2009 .

[14]  Tulin Bali,et al.  An experimental study on heat transfer and pressure drop characteristics of decaying swirl flow through a circular pipe with a vortex generator , 2007 .

[15]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .

[16]  Sujoy Kumar Saha,et al.  Heat transfer and pressure drop characteristics of laminar flow in rectangular and square plain ducts and ducts with twisted-tape inserts , 2005 .

[17]  M. Collins,et al.  Investigation of flow and heat transfer in corrugated passages—I. Experimental results , 1996 .

[18]  Mengna Hong,et al.  Compound Heat Transfer Enhancement of a Converging-Diverging Tube with Evenly Spaced Twisted-tapes * , 2007 .

[19]  Enhanced Heat Transfer of Shaker-Bored Piston Cooling Channel with Twisted Tape Insert , 2007 .

[20]  Ventsislav D. Zimparov,et al.  Enhancement of heat transfer by a combination of a single-start spirally corrugated tubes with a twisted tape , 2002 .

[21]  W. Focke,et al.  Flow visualization in parallel-plate ducts with corrugated walls , 1986, Journal of Fluid Mechanics.

[22]  Je-Chin Han,et al.  Turbulent Heat Transfer Enhancement and Surface Heating Effect in Square Channels with Wavy, and Twisted Tape Inserts with Interrupted Ribs , 2000 .

[23]  R. P. Saini,et al.  Performance of artificially roughened solar air heaters—A review , 2009 .

[24]  Masoud Rahimi,et al.  Experimental and CFD studies on heat transfer and friction factor characteristics of a tube equipped with modified twisted tape inserts , 2009 .

[25]  S. Saha,et al.  Thermohydraulics of Laminar Flow Through Rectangular and Square Ducts With Transverse Ribs and Twisted Tapes , 2006 .

[26]  F. Landis,et al.  Friction and Forced Convection Heat-Transfer Characteristics in Tubes With Twisted Tape Swirl Generators , 1964 .

[27]  Heat transfer augmentation in tubular flow by twisted tapes at high temperatures and optimum performance , 1983 .

[28]  C. P. Lee,et al.  Heat Transfer and Friction Characteristics of Turbulent Flow in Circular Tubes with Twisted-Tape Inserts and Axial Interrupted Ribs , 1997 .