A systematic method of remaining useful life estimation based on physics-informed graph neural networks with multisensor data

[1]  Yingqian Zhang,et al.  Attention and Long Short-Term Memory Network for Remaining Useful Lifetime Predictions of Turbofan Engine Degradation , 2023, International Journal of Prognostics and Health Management.

[2]  E. Zio,et al.  Gas liquid cylindrical cyclone flow regime identification using machine learning combined with experimental mechanism explanation , 2022, Petroleum Science.

[3]  Xiangyi Du,et al.  How to improve machine learning models for lithofacies identification by practical and novel ensemble strategy and principles , 2022, Petroleum Science.

[4]  Hongrui Cao,et al.  A gated graph convolutional network with multi-sensor signals for remaining useful life prediction , 2022, Knowl. Based Syst..

[5]  Lei Cheng,et al.  Prediction of gas concentration evolution with evolutionary attention-based temporal graph convolutional network , 2022, Expert Syst. Appl..

[6]  Lu Liu,et al.  Aircraft engine remaining useful life estimation via a double attention-based data-driven architecture , 2022, Reliab. Eng. Syst. Saf..

[7]  Shangsheng Yan,et al.  A comparison of deep learning methods for seismic impedance inversion , 2022, Petroleum Science.

[8]  Enrico Zio,et al.  Prognostics and health management: A review from the perspectives of design, development and decision , 2022, Reliab. Eng. Syst. Saf..

[9]  Yong Zhang,et al.  Health status assessment and remaining useful life prediction of aero-engine based on BiGRU and MMoE , 2021, Reliab. Eng. Syst. Saf..

[10]  Yi Qin,et al.  Multicellular LSTM-based deep learning model for aero-engine remaining useful life prediction , 2021, Reliab. Eng. Syst. Saf..

[11]  E. Zio,et al.  Optimization of the Operation and Maintenance of Renewable Energy Systems by Deep Reinforcement Learning , 2021, SSRN Electronic Journal.

[12]  Enrico Zio,et al.  Prognostics and Health Management (PHM): Where are we and where do we (need to) go in theory and practice , 2021, Reliab. Eng. Syst. Saf..

[13]  Andreas Theissler,et al.  Challenges of machine learning-based RUL prognosis: A review on NASA's C-MAPSS data set , 2021, 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ).

[14]  Fuchuan Zeng,et al.  A deep attention residual neural network-based remaining useful life prediction of machinery , 2021 .

[15]  Matthew J. Darr,et al.  A physics-informed deep learning approach for bearing fault detection , 2021, Eng. Appl. Artif. Intell..

[16]  Peng Ding,et al.  Transfer learning for remaining useful life prediction of multi-conditions bearings based on bidirectional-GRU network , 2021, Measurement.

[17]  Mingyu Fan,et al.  AST-GNN: An attention-based spatio-temporal graph neural network for Interaction-aware pedestrian trajectory prediction , 2021, Neurocomputing.

[18]  Henderi Henderi,et al.  Comparison of Min-Max normalization and Z-Score Normalization in the K-nearest neighbor (kNN) Algorithm to Test the Accuracy of Types of Breast Cancer , 2021 .

[19]  Yuxiong Li,et al.  A Double-Channel Hybrid Deep Neural Network Based on CNN and BiLSTM for Remaining Useful Life Prediction , 2020, Sensors.

[20]  Pier Carlo Berri,et al.  Computational framework for real-time diagnostics and prognostics of aircraft actuation systems , 2020, Comput. Ind..

[21]  Yong Yu,et al.  Averaged Bi-LSTM networks for RUL prognostics with non-life-cycle labeled dataset , 2020, Neurocomputing.

[22]  Weifeng Lv,et al.  LSTM variants meet graph neural networks for road speed prediction , 2020, Neurocomputing.

[23]  Wennian Yu,et al.  An improved similarity-based prognostic algorithm for RUL estimation using an RNN autoencoder scheme , 2020, Reliab. Eng. Syst. Saf..

[24]  Wei Zhao,et al.  Remaining useful life prediction using multi-scale deep convolutional neural network , 2020, Appl. Soft Comput..

[25]  Chetan S. Kulkarni,et al.  Fusing Physics-based and Deep Learning Models for Prognostics , 2020, Reliab. Eng. Syst. Saf..

[26]  Yu Zheng,et al.  An ensemble framework based on convolutional bi-directional LSTM with multiple time windows for remaining useful life estimation , 2020, Comput. Ind..

[27]  Deepak Gupta,et al.  Robust regularized extreme learning machine with asymmetric Huber loss function , 2020, Neural Computing and Applications.

[28]  Yaguo Lei,et al.  Deep separable convolutional network for remaining useful life prediction of machinery , 2019 .

[29]  Yang Ji,et al.  A Weighted Deep Domain Adaptation Method for Industrial Fault Prognostics According to Prior Distribution of Complex Working Conditions , 2019, IEEE Access.

[30]  Wennian Yu,et al.  Remaining useful life estimation using a bidirectional recurrent neural network based autoencoder scheme , 2019, Mechanical Systems and Signal Processing.

[31]  Amir Asif,et al.  A multimodal and hybrid deep neural network model for Remaining Useful Life estimation , 2019, Comput. Ind..

[32]  Oliver Schütze,et al.  A Neural Network-Evolutionary Computational Framework for Remaining Useful Life Estimation of Mechanical Systems , 2019, Neural Networks.

[33]  Qian Liu,et al.  Gated recurrent unit based recurrent neural network for remaining useful life prediction of nonlinear deterioration process , 2019, Reliab. Eng. Syst. Saf..

[34]  Lei Ren,et al.  Multi-scale Dense Gate Recurrent Unit Networks for bearing remaining useful life prediction , 2019, Future Gener. Comput. Syst..

[35]  Houxiang Zhang,et al.  Remaining useful life predictions for turbofan engine degradation using semi-supervised deep architecture , 2019, Reliab. Eng. Syst. Saf..

[36]  Huihui Miao,et al.  Joint Learning of Degradation Assessment and RUL Prediction for Aeroengines via Dual-Task Deep LSTM Networks , 2019, IEEE Transactions on Industrial Informatics.

[37]  Soumaya Yacout,et al.  Bidirectional handshaking LSTM for remaining useful life prediction , 2019, Neurocomputing.

[38]  Robert X. Gao,et al.  Deep learning and its applications to machine health monitoring , 2019, Mechanical Systems and Signal Processing.

[39]  Peng Wang,et al.  Long short-term memory for machine remaining life prediction , 2018, Journal of Manufacturing Systems.

[40]  Lei Ren,et al.  Bearing remaining useful life prediction based on deep autoencoder and deep neural networks , 2018, Journal of Manufacturing Systems.

[41]  Takehisa Yairi,et al.  A review on the application of deep learning in system health management , 2018, Mechanical Systems and Signal Processing.

[42]  Aleksander Madry,et al.  How Does Batch Normalization Help Optimization? (No, It Is Not About Internal Covariate Shift) , 2018, NeurIPS.

[43]  Yaguo Lei,et al.  Machinery health prognostics: A systematic review from data acquisition to RUL prediction , 2018 .

[44]  Konstantin Eckle,et al.  A comparison of deep networks with ReLU activation function and linear spline-type methods , 2018, Neural Networks.

[45]  Xiang Li,et al.  Remaining useful life estimation in prognostics using deep convolution neural networks , 2018, Reliab. Eng. Syst. Saf..

[46]  Hongwen He,et al.  Long Short-Term Memory Recurrent Neural Network for Remaining Useful Life Prediction of Lithium-Ion Batteries , 2018, IEEE Transactions on Vehicular Technology.

[47]  Li Lin,et al.  Remaining useful life estimation of engineered systems using vanilla LSTM neural networks , 2018, Neurocomputing.

[48]  Bo Peng,et al.  Cycle life estimation of lithium-ion polymer batteries using artificial neural network and support vector machine with time-resolved thermography , 2017, Microelectron. Reliab..

[49]  Pietro Liò,et al.  Graph Attention Networks , 2017, ICLR.

[50]  Pierre Vandergheynst,et al.  Geometric Deep Learning: Going beyond Euclidean data , 2016, IEEE Signal Process. Mag..

[51]  Li Lin,et al.  Fault diagnosis and remaining useful life estimation of aero engine using LSTM neural network , 2016, 2016 IEEE International Conference on Aircraft Utility Systems (AUS).

[52]  Wenjing Jin,et al.  Enhanced Restricted Boltzmann Machine With Prognosability Regularization for Prognostics and Health Assessment , 2016, IEEE Transactions on Industrial Electronics.

[53]  Pedro Paulo Balestrassi,et al.  Design of experiments and focused grid search for neural network parameter optimization , 2016, Neurocomputing.

[54]  Taejung Yeo,et al.  A novel multistage Support Vector Machine based approach for Li ion battery remaining useful life estimation , 2015 .

[55]  Emmanuel Ramasso,et al.  Investigating computational geometry for failure prognostics , 2014, International Journal of Prognostics and Health Management.

[56]  Enrico Zio,et al.  Fatigue crack growth estimation by relevance vector machine , 2012, Expert Syst. Appl..

[57]  Abhinav Saxena,et al.  Damage propagation modeling for aircraft engine run-to-failure simulation , 2008, 2008 International Conference on Prognostics and Health Management.

[58]  Daming Lin,et al.  A review on machinery diagnostics and prognostics implementing condition-based maintenance , 2006 .

[59]  Lutz Prechelt,et al.  Automatic early stopping using cross validation: quantifying the criteria , 1998, Neural Networks.

[60]  Ruqiang Yan,et al.  The emerging graph neural networks for intelligent fault diagnostics and prognostics: A guideline and a benchmark study , 2022, Mechanical Systems and Signal Processing.

[61]  Abdallah Chehade,et al.  A dual-LSTM framework combining change point detection and remaining useful life prediction , 2021, Reliab. Eng. Syst. Saf..

[62]  Kai Goebel,et al.  More effective prognostics with elbow point detection and deep learning , 2021 .

[63]  Hongfu Zuo,et al.  Prediction of remaining useful life of multi-stage aero-engine based on clustering and LSTM fusion , 2021, Reliab. Eng. Syst. Saf..

[64]  Ruqiang Yan,et al.  Hierarchical attention graph convolutional network to fuse multi-sensor signals for remaining useful life prediction , 2021, Reliab. Eng. Syst. Saf..

[65]  Tangbin Xia,et al.  A hybrid prognostic method based on gated recurrent unit network and an adaptive Wiener process model considering measurement errors , 2021 .

[66]  Minping Jia,et al.  A BiGRU method for remaining useful life prediction of machinery , 2021 .

[67]  A. Wills,et al.  Physics-Informed Machine , 2021 .

[68]  Ekachai Phaisangittisagul,et al.  An Analysis of the Regularization Between L2 and Dropout in Single Hidden Layer Neural Network , 2016, 2016 7th International Conference on Intelligent Systems, Modelling and Simulation (ISMS).

[69]  Nitish Srivastava,et al.  Dropout: a simple way to prevent neural networks from overfitting , 2014, J. Mach. Learn. Res..