Electrospinning of Polyamides With Different Chain Compositions for Filtration Application

Electrospinning of several polyamides, PA6, PA66, PA612, PA614, PA1012, and PA1014, having different chain compositions and lengths of diacid and diamine segments, was demonstrated. Electrospinnability and fiber production rate of these polyamides were evaluated. Electrospun fibers were characterized with regard to their use in air filtration by measuring fiber diameter and filtration efficiency of fiber coating. Longer nonpolar chain segments of higher polyamides could in theory indicate higher dielectricity compared to PA6 and PA66, which would be an advantage in filtration applications. The solubility in polar formic acid and electrospinnability of higher polyamides, on the other hand, were clearly impaired with increased length of chain segments. Hence, PA66 is our best choice, and PA612 and PA6 our second options for commercial filtration applications if fiber electrospinnability, production rate, fiber diameter, and its distribution are concerned. Filtration efficiency of more than 95% of the particles having a diameter of 0.16 μm and above was achieved with 0.5 g/m2 coating of PA66 nanofibers. Further increase in coating weight mainly increased the pressure drop to an unusable range without a significant further improvement of filtration efficiency. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers.

[1]  T. B. Green,et al.  The thermal effects on electrospinning of polylactic acid melts , 2006 .

[2]  Chaobo Huang,et al.  Electrospun polymer nanofibres with small diameters , 2006, Nanotechnology.

[3]  Tae Jin Kang,et al.  Hydraulic permeabilities of PET and nylon 6 electrospun fiber webs , 2006 .

[4]  J. S. Stephens,et al.  Effect of the Electrospinning Process on Polymer Crystallization Chain Conformation in Nylon-6 and Nylon-12 , 2004 .

[5]  Seeram Ramakrishna,et al.  Preparation and characterization of nanofibrous filtering media , 2006 .

[6]  Richard A. Vaia,et al.  Generation of electrospun fibers of nylon 6 and nylon 6-montmorillonite nanocomposite , 2002 .

[7]  H. Craighead,et al.  Formation and properties of nylon-6 and nylon-6/montmorillonite composite nanofibers , 2006 .

[8]  Zheng-ming Huang,et al.  Electrospinning of nylon-6,66,1010 terpolymer , 2006 .

[9]  J. Rabolt,et al.  Polarized Raman Measurements of Uniaxially Oriented Poly(ε-caprolactam) , 2001 .

[10]  T. Kang,et al.  Polyaniline-Nylon 6 Composite Nanowires Prepared by Emulsion Polymerization and Electrospinning Process , 2006 .

[11]  S. Shivkumar,et al.  Nano-sized beads and porous fiber constructs of Poly(ε-caprolactone) produced by electrospinning , 2004 .

[12]  Manit Nithitanakul,et al.  Ultrafine Electrospun Polyamide‐6 Fibers: Effect of Solution Conditions on Morphology and Average Fiber Diameter , 2004 .

[13]  I. Chronakis,et al.  Polymer nanofibers assembled by electrospinning , 2003 .

[14]  Andreas Greiner,et al.  Electrospun nanofibers: Internal structure and intrinsic orientation , 2003 .

[15]  P. Supaphol,et al.  Effects of Solution Concentration, Emitting Electrode Polarity, Solvent Type, and Salt Addition on Electrospun Polyamide‐6 Fibers: A Preliminary Report , 2004 .

[16]  L. Garrod.  Monilia in the Sputum , 1934 .

[17]  Zheng-ming Huang,et al.  Preparation and Characterization of Core—Shell Structured Nanofibers by Coaxial Electrospinning , 2007 .

[18]  A. Sipilä,et al.  Electrospun PA-66 Coating on Textile Surfaces , 2007 .

[19]  Younan Xia,et al.  Electrospinning of Nanofibers: Reinventing the Wheel? , 2004 .

[20]  Bin Ding,et al.  Formation of novel 2D polymer nanowebs via electrospinning , 2006 .

[21]  Michael Sennett,et al.  Protective textile materials based on electrospun nanofibers , 2002 .

[22]  M. J. Hill,et al.  Measurement of the intersheet shear along the chain axis in nylon 6 , 2001 .

[23]  P. Supaphol,et al.  Ultrafine electrospun polyamide‐6 fibers: Effect of emitting electrode polarity on morphology and average fiber diameter , 2005 .

[24]  D. Yan,et al.  Crystal Structure of Novel Polyamides with Long Diacid Segment: Polyamides 2 16, 4 16, 6 16, 8 16, 10 16, and 12 16 , 2003 .

[25]  J. Seppälä,et al.  Poly(vinyl alcohol) and polyamide-66 nanocomposites prepared by electrospinning , 2006 .

[26]  Hak Yong Kim,et al.  Transport properties of electrospun nylon 6 nonwoven mats , 2003 .

[27]  J. Wendorff,et al.  Poly(p-xylylene) Nanotubes by Coating and Removal of Ultrathin Polymer Template Fibers , 2002 .

[28]  Darrell H. Reneker,et al.  Bending instability of electrically charged liquid jets of polymer solutions in electrospinning , 2000 .

[29]  Gyula J. Vancso,et al.  Transparent Nanocomposites with Ultrathin, Electrospun Nylon-4,6 Fiber Reinforcement , 1999 .

[30]  Moncy V. Jose,et al.  Morphology and mechanical properties of Nylon 6/MWNT nanofibers , 2007 .

[31]  Tae Jin Kang,et al.  Preparation of conducting nylon-6 electrospun fiber webs by the in situ polymerization of polyaniline , 2005 .

[32]  Darrell H. Reneker,et al.  Electrospinning process and applications of electrospun fibers , 1995 .

[33]  W. A. Yager,et al.  The Relation of Dielectric Properties to Structure of Crystalline Polymers. II. Linear Polyamides , 1942 .

[34]  J. Deitzel,et al.  Optical properties of transparent resins with electrospun polymer nanofibers , 2006 .

[35]  Ji-Beom Yoo,et al.  Fabrication of MWNTs/nylon conductive composite nanofibers by electrospinning , 2006 .

[36]  D. Reneker,et al.  Electrospinning of polymer nanofibres from multiple jets on a porous tubular surface , 2006, Nanotechnology.