Optimum Criss Crossing Cables in Multi-span Cable-stayed Bridges using Genetic Algorithms

A multi-objective optimization approach in order to find the optimal cable overlap length in multi-span cable-stayed bridges with criss-cross cables is presented. The multi-objective optimization is solved by considering three objectives: 1) the cost of the cable system, 2) the displacement at the top of the pylon and 3) the alternate live load on the bridge. An unconventional criss-cross cable system configuration in which cables criss-cross at the center of intermediate spans is used for a bridge with five spans and four pylons. Taking into account both the cable overlap length and the different occurrences of alternate live load, the set of optimal solutions was obtained by the use of genetic algorithms. Results indicate that the optimal cable overlap length corresponds to three criss-crossing cables that corresponds to 0.28 times the length of the central span. Research on multi-span cable-stayed bridges with criss-cross cables allows the analysis of another solution for the problem of stabilizing the displacement of intermediate pylons in this kind of bridge.

[1]  Kalyanmoy Deb,et al.  A Comparative Analysis of Selection Schemes Used in Genetic Algorithms , 1990, FOGA.

[2]  Amjad J. Aref,et al.  A genetic algorithm-based multi-objective optimization for hybrid fiber reinforced polymeric deck and cable system of cable-stayed bridges , 2015, Structural and Multidisciplinary Optimization.

[3]  Landolf Rhode-Barbarigos,et al.  Multi-objective optimization of polyester-rope and steel-rope suspended footbridges , 2015 .

[4]  Raquib Ahsan,et al.  Application of evolutionary operation to the minimum cost design of continuous prestressed concrete bridge structure , 2013 .

[5]  D Bond AN EXAMINATION OF THE AUTOMATED DESIGN OF PRESTRESSED CONCRETE BRIDGE DECKS BY COMPUTER , 1975 .

[6]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[7]  Wancheng Yuan,et al.  System-based probabilistic optimization of fluid viscous dampers equipped in cable-stayed bridges , 2018 .

[8]  Vincent Caccese,et al.  Multi-objective optimization of laser-welded steel sandwich panels for static loads using a genetic algorithm , 2013 .

[9]  David Coley,et al.  Introduction to Genetic Algorithms for Scientists and Engineers , 1999 .

[10]  Alberto M. B. Martins,et al.  Optimum design of concrete cable-stayed bridges with prestressed decks , 2016 .

[11]  Akhil Upadhyay,et al.  Genetic Algorithms-based Optimization of Cable Stayed Bridges , 2011, J. Softw. Eng. Appl..

[12]  Bin Sun,et al.  Optimization of cable pre-tension forces in long-span cable-stayed bridges considering the counterweight , 2018, Engineering Structures.

[13]  Henry G. Russell,et al.  OPTIMIZED SECTIONS FOR PRECAST, PRESTRESSED BRIDGE GIRDERS , 1982 .

[14]  Antonio Hospitaler,et al.  A parametric study of optimum tall piers for railway bridgeviaducts , 2013 .

[15]  M. Shahria Alam,et al.  Multi-criteria optimization of lateral load-drift response of posttensioned steel beam-column connections , 2017 .

[16]  K. Ramanjaneyulu,et al.  An integrated approach for optimum design of bridge decks using genetic algorithms and artificial neural networks , 2007, Adv. Eng. Softw..

[17]  M Z Cohn,et al.  OPTIMIZATION OF PRECAST PRESTRESSED CONCRETE BRIDGE GIRDER SYSTEM , 1993 .

[18]  Jörg Schlaich,et al.  The Art of Structural Engineering: The Work of Jörg Schlaich and his Team (Holgate, A.) , 1998 .

[19]  M. Cid Montoya,et al.  Shape optimization of streamlined decks of cable-stayed bridges considering aeroelastic and structural constraints , 2018, Journal of Wind Engineering and Industrial Aerodynamics.

[20]  Solomon Tesfamariam,et al.  A survey of non-gradient optimization methods in structural engineering , 2013, Adv. Eng. Softw..

[21]  DebK.,et al.  A fast and elitist multiobjective genetic algorithm , 2002 .

[22]  Mahmoud Hassan,et al.  Optimization of stay cables in cable-stayed bridges using finite element, genetic algorithm, and B-spline combined technique , 2013 .

[23]  N. C. Das Gupta,et al.  OPTIMIZATION OF PRESTRESSED CONCRETE BRIDGE GIRDERS , 1986 .

[24]  Fernando Fraternali,et al.  Optimal prestress design of composite cable-stayed bridges , 2017 .

[25]  Subhash C. Sarin,et al.  PROCEDURE FOR STRUCTURAL OPTIMIZATION , 1989 .

[26]  P.K.K. Lee,et al.  Determination of initial cable forces in prestressed concrete cable-stayed bridges for given design deck profiles using the force equilibrium method , 2000 .