Microstructure and hardness studies of electron beam welded Inconel 625 and stainless steel 304L

[1]  N. Tariq,et al.  Electron beam brazing of Zr62Al13Ni7Cu18 bulk metallic glass with Ti metal , 2014 .

[2]  J. I. Akhter,et al.  Novel microstructural growth in the surface of Inconel 625 by the addition of SiC under electron beam melting , 2011 .

[3]  Mashkoor Ahmad,et al.  Microstructure and hardness of electron beam molten surface of DSX40M alloy , 2008 .

[4]  J. I. Akhter,et al.  Cracking during solidification of diffusion bonded Inconel 625 in the presence of Zircaloy-4 interlayer , 2008 .

[5]  J. Mayer,et al.  Effects of Nb on the microstructure and corrosive property in the Alloy 690–SUS 304L weldment , 2005 .

[6]  Hwa-Teng Lee,et al.  Dissimilar welding of nickel-based Alloy 690 to SUS 304L with Ti addition , 2004 .

[7]  A. Inoue,et al.  Electron-beam welding of Zr50Cu30Ni10Al10 bulk glassy alloys , 2004 .

[8]  S. Kou.  Solidification and liquation cracking issues in welding , 2003 .

[9]  Hwa-Teng Lee,et al.  Evaluation of effects of niobium and manganese addition on nickel base weldments , 2003 .

[10]  Hwa-Teng Lee,et al.  The microstructure and fracture behavior of the dissimilar alloy 690-SUS 304L joint with various Nb addition , 2003 .

[11]  Hwa-Teng Lee,et al.  Effects of filler metal composition on joining properties of alloy 690 weldments , 2002 .

[12]  H.T. Lee,et al.  Characteristics of dissimilar welding of alloy 690 to 304L stainless steel , 2001 .

[13]  S. L. Mannan,et al.  Microstructure and mechanical properties of Inconel 625 superalloy , 2001 .

[14]  Roger C. Reed,et al.  A process model for the distortion induced by the electron-beam welding of a nickel-based superalloy , 2000 .

[15]  Joung-Soo Kim,et al.  Effects of sensitization treatment on the evolution of Cr carbides in rapidly solidified Ni-base Alloy 600 by a CO2 laser beam , 2000 .

[16]  Hwa-Teng Lee,et al.  Analysis of microstructure and mechanical properties in alloy 690 weldments using filler metals I-82 and I-52 , 1999 .

[17]  R. L. Cowan,et al.  Experience and assessment of stress corrosion cracking in L-grade stainless steel BWR internals , 1997 .

[18]  R. Karppi,et al.  The application of electron beam welding for the joining of dissimilar metals: an overview , 1996 .

[19]  K. Stiller,et al.  Structure, chemistry, and stress corrosion cracking of grain boundaries in alloys 600 and 690 , 1996 .

[20]  R. E. Avery,et al.  Pay attention to dissimilar-metal welds , 1991 .

[21]  T. Ishihara.  Corrosion failure and its prevention in light water reactor power plants , 1989 .

[22]  J. M. Vitek,et al.  Correlation between solidification parameters and weld microstructures , 1989 .

[23]  A F TAYLOR,et al.  ELECTRON BEAM WELDING. , 1964, The Annals of occupational hygiene.