Prototype design and realization of an innovative energy efficient transfemoral prosthesis

In this paper, we present the prototype realization of the conceptual design of a fully-passive transfemoral prosthesis. The working principle has been inspired by the power flow in human gait so to achieve an energy efficient device. The main goal of this paper is to validate the concept by implementing in a real prototype. The prototype, in scale 1 ∶ 2 with respect to the average dimensions of an adult human, is based on two storage elements, which are responsible for the energetic coupling between the knee and ankle joints during the swing phase and for the energy storage during the stance phase. The design parameters of the prototype are determined according to the human body and the energetic characteristics of the gait. The construction of the prototype is explained in details together with a test setup that has been built to evaluate the prototype.

[1]  T.G. Sugar,et al.  SPARKy 3: Design of an active robotic ankle prosthesis with two actuated degrees of freedom using regenerative kinetics , 2008, 2008 2nd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics.

[2]  Jun-Ho Oh,et al.  Development of an above knee prosthesis using MR damper and leg simulator , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[3]  Alberto Rovetta,et al.  Innovatory bio-robotic system for the accumulation of the energy of step in a limb prosthesis , 2003 .

[4]  Hugh Herr,et al.  User-adaptive control of a magnetorheological prosthetic knee , 2003, Ind. Robot.

[5]  A. J. van den Bogert.  Exotendons for assistance of human locomotion , 2003, Biomedical engineering online.

[6]  D. Herring,et al.  Adjustable Robotic Tendon using a ‘ Jack Spring ’ TM , 2005 .

[7]  A. Rovetta,et al.  Biorobotic Criteria in the Design of a New Limb Prosthesis , 2001 .

[8]  Alberto Rovetta,et al.  Development of a Simple and Effcient Above Knee Prosthesis , 2003 .

[9]  K.W. Hollander,et al.  Adjustable robotic tendon using a 'Jack Spring'/spl trade/ , 2005, 9th International Conference on Rehabilitation Robotics, 2005. ICORR 2005..

[10]  Richard A. Brand,et al.  The biomechanics and motor control of human gait: Normal, elderly, and pathological , 1992 .

[11]  Giovanni Campa,et al.  Biorobotic design criteria for Innovative Limb Prosthesis , 2002 .

[12]  David A. Winter,et al.  Biomechanics and Motor Control of Human Movement , 1990 .

[13]  R. Waters,et al.  Energy cost of walking of amputees: the influence of level of amputation. , 1976, The Journal of bone and joint surgery. American volume.

[14]  Woodie Claude Flowers.  A man-interactive simulator system for above-knee prosthetics studies. , 1973 .

[15]  J A Hoffer,et al.  Biomechanical Energy Harvesting: Generating Electricity During Walking with Minimal User Effort , 2008, Science.

[16]  Antonie J. van den Bogert,et al.  Exotendons for assistance of human locomotion , 2003 .

[17]  Shumei S. Guo,et al.  2000 CDC Growth Charts for the United States: methods and development. , 2002, Vital and health statistics. Series 11, Data from the National Health Survey.

[18]  H.A. Varol,et al.  Design and control of an active electrical knee and ankle prosthesis , 2008, 2008 2nd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics.

[19]  Michael Goldfarb,et al.  Design and Control of a Powered Transfemoral Prosthesis , 2008, Int. J. Robotics Res..

[20]  R. Brand,et al.  The biomechanics and motor control of human gait: Normal, elderly, and pathological , 1992 .

[21]  Stefano Stramigioli,et al.  Conceptual design of an energy efficient transfemoral prosthesis , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[22]  스테판 베다드,et al.  Actuated Leg Prosthesis for Above-knee Amputees , 2003 .