Modeling thin layers of analytes on substrates for spectral analysis: use of solid/liquid n and k values to model reflectance spectra

Abstract. Since solids are only sometimes seen en masse in a pure bulk form, and for liquids other than water almost never, a capability to model reflectance spectra from analytes deposited on various substrates would be highly advantageous. If available, the real, n  (  ν  )  , and imaginary, k  (  ν  )  , components of the complex refractive index,   n∼    =  n  +  ik, can be used to simulate infrared spectra, accounting for reflection, refraction, and absorption phenomena as a function of wavelength. We focus on using the Pacific Northwest National Laboratory (PNNL) derived n  /  k vectors for solid and liquid analytes deposited as thin layers on different types of substrates including conductors, such as aluminum, and inorganic dielectrics, such as glass. The model is an adaptation of the Monte Carlo ray trace modeling program, TracePro, extended through the use of its macrolanguage. The model is tested using thin films of organic liquids including silicone oil and no. 2 diesel fuel, as well as organic solids such as caffeine and acetaminophen on aluminum and glass. The predicted spectra for the solid films were compared to experimental hemispherical reflectance data measured using a Fourier transform spectrometer with an integrating sphere. The thickness of the calculated layer is a parameter for predicting the (transflectance) spectra and is obtained using the areal density measured from gravimetric methods to generate the thin-layer samples. Comparison of the calculated spectra with experimental hemispherical reflectance data shows excellent agreement, indicating promise for the use of measured n  /  k data to synthesize reference spectral data. In particular, accounting for the inhomogeneity of the deposits greatly improved the match with experimental data. Finally, the theoretical modeling shows that for thicker layers (ca. 20 to 100  μm) of typical organics possessing moderately strong k values, the longwave infrared features are often saturated and better spectral contrast is obtained from the overtone/combination bands in the shortwave infrared.

[1]  Tanya L. Myers,et al.  Measurement of the infrared optical constants for spectral modeling: n and k values for (NH4)2SO4 via single-angle reflectance and ellipsometric methods , 2017, Defense + Security.

[2]  Thomas A Blake,et al.  Passive standoff detection of RDX residues on metal surfaces via infrared hyperspectral imaging , 2009, Analytical and bioanalytical chemistry.

[3]  T. L. Myers,et al.  Real-time trace gas sensing of fluorocarbons using a swept-wavelength external cavity quantum cascade laser. , 2014, The Analyst.

[4]  A. Rakić,et al.  Algorithm for the determination of intrinsic optical constants of metal films: application to aluminum. , 1995, Applied optics.

[5]  R. K. Prasanth,et al.  Novel trace chemical detection algorithms: a comparative study , 2017, Defense + Security.

[6]  T. L. Myers,et al.  Single-angle reflectance spectroscopy to determine the optical constants n and k: considerations in the far-infrared domain. , 2018, Applied optics.

[7]  I. R. Burling,et al.  Quantitative IR spectrum and vibrational assignments for glycolaldehyde vapor: glycolaldehyde measurements in biomass burning plumes. , 2013, The journal of physical chemistry. A.

[8]  Tanya L. Myers,et al.  Modeling liquid organic thin films on substrates , 2018, Defense + Security.

[9]  Tom Burr,et al.  Overview of Physical Models and Statistical Approaches for Weak Gaseous Plume Detection using Passive Infrared Hyperspectral Imagery , 2006 .

[10]  John E. Bertie,et al.  Infrared Intensities of Liquids XI: Infrared Refractive Indices from 8000 to 2 cm−1, Absolute Integrated Intensities, and Dipole Moment Derivatives of Methanol at 25°C , 1993 .

[11]  Yin-Fong Su,et al.  Quantitative reflectance spectra of solid powders as a function of particle size. , 2015, Applied optics.

[12]  T. L. Myers,et al.  Accurate Measurement of the Optical Constants n and k for a Series of 57 Inorganic and Organic Liquids for Optical Modeling and Detection , 2017, Applied spectroscopy.

[13]  Jeffrey Edward Moersch,et al.  Thermal emission from particulate surfaces : a comparison of scattering models with measured spectra , 1995 .

[14]  Thomas A Blake,et al.  Absolute integrated intensities of vapor-phase hydrogen peroxide (H2O2) in the mid-infrared at atmospheric pressure , 2009, Analytical and bioanalytical chemistry.

[15]  Kristin DeWitt,et al.  Advances in active infrared spectroscopy for trace chemical detection , 2019, Defense + Commercial Sensing.

[16]  John E. Bertie,et al.  Quantitative Infrared Intensities of Neat Liquids: Their Measurement and Use , 1997 .

[17]  O. Heavens Thin-film Optical Filters , 1986 .

[18]  H. Fujiwara,et al.  Spectroscopic Ellipsometry: Principles and Applications , 2007 .

[19]  Tanya L. Myers,et al.  Accurate optical constants for liquids in the near-infrared:Improved methods for obtaining the n and k constants from 1 to 4 μm , 2019, Defense + Commercial Sensing.

[20]  J. Theiler,et al.  Spectral Variability of Remotely Sensed Target Materials: Causes, Models, and Strategies for Mitigation and Robust Exploitation , 2019, IEEE Geoscience and Remote Sensing Magazine.

[21]  Toya N. Beiswenger,et al.  Hyperspectral imaging of minerals in the longwave infrared: the use of laboratory directional-hemispherical reference measurements for field exploration data , 2019, Journal of Applied Remote Sensing.

[22]  Michael DiLiberto,et al.  Active infrared multispectral imaging of chemicals on surfaces , 2011, Defense + Commercial Sensing.

[23]  Christopher J. Breshike,et al.  Infrared backscatter imaging spectroscopy of trace analytes at standoff , 2019, Journal of Applied Physics.

[24]  Yin-Fong Su,et al.  Methods for quantitative infrared directional-hemispherical and diffuse reflectance measurements using an FTIR and a commercial integrating sphere. , 2018, Applied optics.

[25]  Tanya L. Myers,et al.  Obtaining the complex optical constants n and k via quantitative absorption measurements in KBr pellets , 2019, Defense + Commercial Sensing.

[26]  Tanya L. Myers,et al.  Complex refractive index measurements for BaF 2 and CaF 2 via single-angle infrared reflectance spectroscopy , 2017 .

[27]  R. Clark,et al.  Reflectance spectroscopy: Quantitative analysis techniques for remote sensing applications , 1984 .

[28]  T. L. Myers,et al.  Optical and Chemical Characterization of Uranium Dioxide (UO2) and Uraninite Mineral: Calculation of the Fundamental Optical Constants. , 2018, The journal of physical chemistry. A.

[29]  Toya N. Beiswenger,et al.  Identification of Uranium Minerals in Natural U-Bearing Rocks Using Infrared Reflectance Spectroscopy , 2018, Applied spectroscopy.