Hot compaction and mechanical properties of ramie fabric/epoxy composite fabricated using vacuum assisted resin infusion molding

Abstract Recently, natural fiber has been a focus for environmental and recyclable polymer composite, because of its excellent properties, such as low cost, low density, high specific strength and modulus. Vacuum assisted resin infusion (VARI) molding is an attractive manufacturing technique for natural fiber reinforced polymer composites with high quality and low cost. Because of low applied pressure of VARI and special compacting property of natural fiber fabric, how to increase natural fiber content of composite is a critical issue for improving the mechanical performances of composite fabricated by VARI. In this paper, ramie fabric/epoxy resin composite laminate was prepared using VARI. In order to increase ramie fiber content, pre-compaction operation on dry ramie fabric stack was carried out before injecting epoxy resin into the fiber fabric. Vacuum pressure compaction and hot compaction with high pressure and temperature were respectively used to compress the fiber stack, and the compaction responses of fabric stack under different vacuum pressure loading cycle and hot compaction conditions were studied. The morphology, structure and tensile property of ramie fiber before and after pre-compaction procedure were investigated and the compaction mechanism under different conditions was discussed. Moreover, the composite laminates using compacted ramie fabric were manufactured using VARI, and tensile, flexural and interlaminar shear properties were measured. It is found that hot compaction can significantly increase ramie fiber content and the mechanical properties of composites. However, when the temperature and pressure of hot compaction are beyond certain values, the mechanical properties of ramie fiber and its composite obviously decrease, indicating that hot compaction conditions have optimizing scope.

[1]  J. Jog,et al.  Natural fiber polymer composites: A review , 1999 .

[2]  Bo Madsen,et al.  Hemp yarn reinforced composites – II. Tensile properties , 2007 .

[3]  A. V. R. Prasad,et al.  Mechanical, thermophysical and fire properties of sansevieria fiber-reinforced polyester composites , 2013 .

[4]  Zhao Yan,et al.  Compression Responses of Preform in Vacuum Infusion Process , 2008 .

[5]  K. M. M. Rao,et al.  Fabrication and testing of natural fibre composites: Vakka, sisal, bamboo and banana , 2010 .

[6]  G. Francucci,et al.  Modeling of the compaction response of jute fabrics in liquid composite molding processes , 2011 .

[7]  R. Parnas.  Liquid Composite Molding , 2000 .

[8]  Tsu-Wei Chou,et al.  Experimental and theoretical studies of fabric compaction behavior in resin transfer molding , 2001 .

[9]  S. Kalia,et al.  Pretreatments of Natural Fibers and their Application as Reinforcing Material in Polymer Composites—A Review , 2009 .

[10]  Anil N. Netravali,et al.  Interfacial and mechanical properties of environment-friendly “green” composites made from pineapple fibers and poly(hydroxybutyrate-co-valerate) resin , 1999 .

[11]  Abdullah Al Mamun,et al.  Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites , 2007 .

[12]  Mike Clifford,et al.  Determining the minimum, critical and maximum fibre content for twisted yarn reinforced plant fibre composites , 2012 .

[13]  A. Vázquez,et al.  Experimental study of the compaction response of jute fabrics in liquid composite molding processes , 2012 .

[14]  Piaras Kelly,et al.  Viscoelastic response of dry and wet fibrous materials during infusion processes , 2006 .

[15]  Kestur Gundappa Satyanarayana,et al.  Studies on lignocellulosic fibers of Brazil. Part I: Source, production, morphology, properties and applications , 2007 .

[16]  A. Hammami,et al.  Analysis of the vacuum infusion molding process , 2000 .

[17]  A. Gupta,et al.  Experimental Investigation of Mechanical Properties of Golden Cane Fiber–Reinforced Polyester Composites , 2013 .

[18]  D. Bhattacharyya,et al.  An Experimental Investigation of Non-Elastic Deformation of Fibrous Reinforcements in Composites Manufacturing , 2006 .

[19]  Leif A. Carlsson,et al.  Experimental characterization of advanced composite materials , 1987 .

[20]  Anil N. Netravali,et al.  Green composites. I. physical properties of ramie fibers for environment-friendly green composites , 2006 .

[21]  D. Shah.  Developing plant fibre composites for structural applications by optimising composite parameters: a critical review , 2013, Journal of Materials Science.

[22]  Nilza G. Justiz-Smith,et al.  Potential of Jamaican banana, coconut coir and bagasse fibres as composite materials , 2008 .

[23]  B. F. Yousif,et al.  In State of Art: Mechanical and tribological behaviour of polymeric composites based on natural fibres , 2013 .

[24]  Lei Xie,et al.  Effect of Compaction and Preforming Parameters on the Compaction Behavior of Bindered Textile Preforms for Automated Composite Manufacturing , 2013, Applied Composite Materials.