Correlation between microstructure and toughness of hot pressed Si3N4 ceramics seeded with β-Si3N4 particles

[1]  Hua-Tay Lin,et al.  Microstructural Design of Silicon Nitride with Improved Fracture Toughness: I, Effects of Grain Shape and Size , 2005 .

[2]  R. Oberacker,et al.  Preparation of β‐Silicon Nitride Seeds for Self‐Reinforced Silicon Nitride Ceramics , 2004 .

[3]  S. Kanzaki,et al.  Further Improvement in Mechanical Properties of Highly Anisotropic Silicon Nitride Ceramics , 2004 .

[4]  Seong‐Hyeon Hong,et al.  Effect of Liquid Content on the Abnormal Grain Growth of Alumina , 2004 .

[5]  P. Miranzo,et al.  Effect of Microstructure on the Thermal Conductivity of Hot-Pressed Silicon Nitride Materials , 2004 .

[6]  K. Watari,et al.  High Thermal Conductivity Silicon Nitride Ceramic , 2001 .

[7]  M. I. Osendi,et al.  Microstructure and Mechanical Properties of Silicon Nitride Materials Fabricated from SHS Powders , 2001 .

[8]  Rui F. Silva,et al.  Effect of α-/β Si3N4-phase ratio and microstructure on the tribological behaviour up to 700°C , 2000 .

[9]  Dong-Soo Park,et al.  Orientation-dependent properties of silicon nitride with aligned reinforcing grains , 2000 .

[10]  Y. Akimune,et al.  Effect of seeding on the thermal conductivity of self-reinforced silicon nitride , 1999 .

[11]  Jow-Lay Huang,et al.  Microstructure in silicon nitride containing β-phase seeding: Part I , 1999 .

[12]  H. Kleebe,et al.  Microstructure and Fracture Toughness of Si3N4 Ceramics: Combined Roles of Grain Morphology and Secondary Phase Chemistry , 1999 .

[13]  M. Mitomo,et al.  Control and characterization of abnormally grown grains in silicon nitride ceramics , 1997 .

[14]  Michael J. Hoffmann,et al.  Model experiments concerning abnormal grain growth in silicon nitride , 1996 .

[15]  M. Belmonte,et al.  Bimodal sintering of Al2O3/Al2O3 platelet ceramic composites , 1995 .

[16]  Chun-Hway Hsueh,et al.  Using Microstructure to Attack the Brittle Nature of Silicon Nitride Ceramics , 1995 .

[17]  N. Hirosaki,et al.  Microstructural Design and Control of Silicon Nitride Ceramics , 1995 .

[18]  Chien-Wei Li,et al.  Relation between Strength, Microstructure, and Grain‐Bridging Characteristics in In Situ Reinforced Silicon Nitride , 1995 .

[19]  Kiyoshi Hirao,et al.  Microstructure Control of Silicon Nitride by Seeding with Rodlike β‐Silicon Nitride Particles , 1994 .

[20]  Y. Akimune,et al.  Microstructure Characterization of Gas‐Pressure‐Sintered β‐Silicon Nitride Containing Large β‐Silicon Nitride Seeds , 1994 .

[21]  T. Tien,et al.  Kinetics of β-Si3N4 Grain Growth in Si3N4 Ceramics Sintered under High Nitrogen Pressure , 1993 .

[22]  M. Mitomo,et al.  Microstructural Development During Gas‐Pressure Sintering of α‐Silicon Nitride , 1992 .

[23]  P. Becher.  Microstructural design of toughened ceramics , 1991 .

[24]  J. Moya,et al.  Elastic/plastic indentation in ceramics: a fracture toughness determination method , 1984 .

[25]  B. Lawn,et al.  A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: II, Strength Method , 1981 .