论文信息 - Mixed Lubrication of Strip Rolling

Mixed Lubrication of Strip Rolling

An analytical model for strip rolling operating in the mixed regime is developed. The model combines analysis for the influence of bulk plastic deformation on the effective hardness of the strip asperities with an approach to allow for the influence of roughness on lubricant flow. An approximate correction for thermal effects is also included. The predictions of the model are compared with experimental measurements of film thickness and slip. Presented as a Society of Tribologists and Lubrication Engineers paper at the STLE/ASME Tribology Conference in New Orleans, Louisiana, October 24–27, 1993

William R. D. Wilson | W. Wilson | Shen Sheu | S. Sheu

[2] J. Tripp. Surface Roughness Effects in Hydrodynamic Lubrication: The Flow Factor Method , 1983 .

[3] G. Taylor,et al. The Heat Developed during Plastic Extension of Metals , 1925 .

[4] C. Chang,et al. Interface temperatures in cold rolling , 1988 .

[5] J. Schey,et al. Full Fluid Film Lubrication in Aluminum Strip Rolling , 1978 .

[6] H. Elrod. A Review of Theories for the Fluid Dynamic Effects of Roughness on Laminar Lubricating Films. , 1977 .

[7] Mpf Sutcliffe,et al. Surface asperity deformation in metal forming processes , 1988 .

[8] Mpf Sutcliffe,et al. Lubrication in Cold Strip Rolling in the ‘Mixed’ Regime , 1990 .

[9] W. Wilson,et al. Full Film Lubrication of Strip Rolling , 1994 .

[10] G. Rowe,et al. Surface roughness changes during rolling , 1975 .

[11] William R. D. Wilson,et al. Real area of contact and boundary friction in metal forming , 1988 .

[12] H. Cheng,et al. Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces , 1979 .

[13] H. Cheng,et al. An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication , 1978 .

[14] W. R. D. Wilson,et al. Friction and lubrication in bulk metal-forming processes , 1978 .

[15] William R. D. Wilson,et al. Surface asperity deformation during sheet forming , 1992 .