Highly sensitive H2S sensor based on template-synthesized CuO nanowires

A sensor device featuring massive aligned CuO nanowires has been fabricated for H2S detection. Metallic copper (Cu) nanowires were first synthesized by a template-assisted electrodeposition method. Dielectrophoresis (DEP) and thermal oxidation were then used to assemble and functionalize/oxidize the nanowires. Topology of the CuO nanowires showed rugged surfaces on the nanowires. H2S sensing properties were characterized by conducting experiments with varying influential factors, including concentration levels from 10 to 1000 ppb and working temperatures from 25 to 420 °C. The CuO nanowire sensor showed good response and repeatability upon H2S exposure with a detection limit of 2.5 ppb and a linear response ranging from 10 ppb to 100 ppb. In addition, the study of temperature influence revealed that the highest response was achieved at 180 °C. Furthermore, with increased working temperature, the CuO nanowire sensor had shorter response and recovery times. An interesting two-stage response was discovered for this CuO nanowire sensor responding to H2S exposure, indicating that two competing reactions existed on the CuO surface.

[1]  A. Pelton,et al.  Assessing corrosion in oil refining and petrochemical processing , 2004 .

[2]  D. Richardson.  Respiratory effects of chronic hydrogen sulfide exposure. , 1995, American journal of industrial medicine.

[3]  S. Ghosh,et al.  Nanocrystalline In2O3-based H2S sensors operable at low temperatures. , 2008, Talanta.

[4]  S S Gautam,et al.  Occupational environment of paper mill workers in South India. , 1979, The Annals of occupational hygiene.

[5]  Zhifu Liu,et al.  Fabrication of WO3 Nanoflakes by a Dealloying-based Approach , 2008 .

[6]  S. Hwang,et al.  Non-enzymatic electrochemical CuO nanoflowers sensor for hydrogen peroxide detection. , 2010, Talanta.

[7]  Baikun Li,et al.  Ammonia Gas Sensor Using Polypyrrole‐Coated TiO2/ZnO Nanofibers , 2009 .

[8]  V. V. Malyshev,et al.  SnO2-based thick-film-resistive sensor for H2S detection in the concentration range of 1–10 mg m−3 , 1998 .

[9]  Feng Zhang,et al.  CuO Nanosheets for Sensitive and Selective Determination of H2S with High Recovery Ability , 2010 .

[10]  Ziqiang Zhu,et al.  Room-temperature high-sensitivity H2S gas sensor based on dendritic ZnO nanostructures with macroscale in appearance , 2008 .

[11]  C. N. R. Rao,et al.  H2S sensors based on tungsten oxide nanostructures , 2008 .

[12]  Yadong Li,et al.  High sensitivity of CuO modified SnO2 nanoribbons to H2S at room temperature , 2005 .

[13]  G. P. Pollack,et al.  PHOTOELECTRIC PROPERTIES OF CUPROUS OXIDE. , 1975 .

[14]  Dongxiang Zhou,et al.  Properties and mechanism study of SnO2 nanocrystals for H2S thick-film sensors , 2009 .

[15]  T. Guidotti.  Hydrogen Sulfide , 2010, International journal of toxicology.

[16]  Kai Wang,et al.  H2S Detection by Vertically Aligned CuO Nanowire Array Sensors , 2008 .

[17]  S. Gangwal,et al.  Testing of novel sorbents for H2S removal from coal gas , 1989 .

[18]  M. Costigan.  Hydrogen sulfide: UK occupational exposure limits , 2003, Occupational and environmental medicine.

[19]  Imtiaz S. Mulla,et al.  Fe-doped SnO2 nanomaterial : A low temperature hydrogen sulfide gas sensor , 2008 .

[20]  D C Glass,et al.  A review of the health effects of hydrogen sulphide exposure. , 1990, The Annals of occupational hygiene.

[21]  K. Sreenivas,et al.  Fast response H2S gas sensing characteristics with ultra-thin CuO islands on sputtered SnO2 , 2003 .

[22]  Jiaqiang Xu,et al.  Hydrothermal synthesis of In2O3 for detecting H2S in air , 2006 .

[23]  Hongwei Sun,et al.  Fabrication and integration of metal oxide nanowire sensors using dielectrophoretic assembly and improved post-assembly processing , 2010 .