Cutting performance of micro-textured polycrystalline diamond tool in dry cutting
暂无分享,去创建一个
Gang Wang | Liang Li | Yongsheng Su | Jianbin Wang | G. Wang | Yongsheng Su | Liang Li | Hong Gao | Zhen Li | Hong Gao | Zhen Li | Jianbin Wang
[1] Jianfeng Ma,et al. FEM assessment of performance of microhole textured cutting tool in dry machining of Ti-6Al-4V , 2016 .
[2] D. Arulkirubakaran,et al. Effect of micro-textured tools on machining of Ti–6Al–4V alloy: An experimental and numerical approach , 2016 .
[3] Jianfeng Ma,et al. 3D numerical investigation of the performance of microgroove textured cutting tool in dry machining of Ti-6Al-4V , 2015 .
[4] Volker Schulze,et al. Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation , 2015 .
[5] Jianxin Deng,et al. Fabrication and tribological properties of Al2O3/TiC ceramic with nano-textures and WS2/Zr soft-coatings , 2014 .
[6] Dan Xia,et al. Performance of the micro-texture self-lubricating and pulsating heat pipe self-cooling tools in dry cutting process , 2014 .
[7] Yucheng Ding,et al. Fabrication of well-defined mushroom-shaped structures for biomimetic dry adhesive by conventional photolithography and molding. , 2014, ACS applied materials & interfaces.
[8] Toshiyuki Enomoto,et al. Crater and flank wear resistance of cutting tools having micro textured surfaces , 2013 .
[9] Wei Tang,et al. The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact , 2013 .
[10] Ze Wu,et al. Performance of femtosecond laser-textured cutting tools deposited with WS2 solid lubricant coatings , 2013 .
[11] Jiliang Mo,et al. The effect of groove-textured surface on friction and wear and friction-induced vibration and noise , 2013 .
[12] Wei Huang,et al. Dimple patterns design for different circumstances , 2013 .
[13] Jianfu Zhang,et al. A Simulation Study on the Effect of Micro-Textured Tools during Orthogonal Cutting of Titanium Alloy Ti-6Al-4V , 2013 .
[14] Toshiyuki Enomoto,et al. Improving anti-adhesion in aluminum alloy cutting by micro stripe texture , 2012 .
[15] Qi Ting,et al. Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes , 2012 .
[16] Wang Zhen. Experimental Study on Orthogonal Cutting of Ti6Al4V with Micro-textured Tool , 2011 .
[17] T. Enomoto,et al. Improvement of Anti-Adhesive Properties of Cutting Tool by Nano/Micro Textures and Its Mechanism , 2011 .
[18] S. Lei,et al. A study of micropool lubricated cutting tool in machining of mild steel , 2009 .
[19] Song Wenlong,et al. Design, fabrication and properties of a self-lubricated tool in dry cutting , 2009 .
[20] Jin Tong,et al. Researches and developments of biomimetics in tribology , 2006 .
[21] W. Barnes,et al. Wet but not slippery: boundary friction in tree frog adhesive toe pads , 2006, Journal of The Royal Society Interface.
[22] Lu Yongxiang,et al. Significance and Progress of Bionics , 2004 .
[23] I. Etsion. State of the art in Laser Surface Texturing , 2004 .
[24] Mahmudur Rahman,et al. Machinability of titanium alloys , 2003 .
[25] E. Ezugwu,et al. An overview of the machinability of aeroengine alloys , 2003 .
[26] D. W. Bechert,et al. Fluid Mechanics of Biological Surfaces and their Technological Application , 2000, Naturwissenschaften.
[27] Z. M. Wang,et al. Titanium alloys and their machinability—a review , 1997 .
[28] M. C. Shaw. Metal Cutting Principles , 1960 .