Genesis: A 5 MA programmable pulsed power driver for Isentropic Compression Experiments

Enabling technologies are being developed at Sandia National Laboratories to improve the performance and flexibility of compact pulsed power drivers for magnetically driven dynamic materials properties research. We have designed a modular system capable of precision current pulse shaping through the selective triggering of pulse forming components into a disk transmission line feeding a strip line load. The system is comprised of two hundred and forty 200 kV, 60 kA modules in a low inductance configuration capable of producing 250–350 kbar of magnetic pressure in a 1.75 nH, 20 mm wide strip line load. The system, called Genesis, measures approximately 5 meters in diameter and is capable of producing shaped currents greater than 5 MA. This performance is enabled through the use of a serviceable solid dielectric insulator system which minimizes the system inductance and reduces the stored energy and operating voltage requirements. Genesis can be programmed by the user to generate precision pulse shapes with rise times of 220–500 ns, allowing characterization of a range of materials from tungsten to polypropylene. This paper provides an overview of the Genesis design including the use of genetic optimization to shape currents through selective module triggering.

[1]  Joseph Ray Woodworth,et al.  New low inductance gas switches for linear transformer drivers , 2009 .

[2]  S. Macgregor,et al.  Evaluation of spark gap switches operated at low percents of self-break voltage. , 2009 .

[3]  M. Cich,et al.  Pulsed and DC charged PCSS based trigger generators , 2009, 2009 IEEE Pulsed Power Conference.

[4]  J. Porter,et al.  High current, 0.5-MA, fast, 100-ns, linear transformer driver experiments , 2009 .

[5]  K.W. Reed,et al.  Genetic Optimization for Pulsed-Power System Configuration , 2009, IEEE Transactions on Plasma Science.

[6]  M. Baer,et al.  A compact strip-line pulsed power generator for isentropic compression experiments. , 2008, The Review of scientific instruments.

[7]  T.G. Engel,et al.  Performance and Scalability of MJ Sequentially Fired Pulse Forming Networks for Linear and Nonlinear Loads , 2007, IEEE Transactions on Plasma Science.

[8]  D. Bliss,et al.  Magnetically driven isentropic compression to multimegabar pressures using shaped current pulses on the Z accelerator , 2004 .

[9]  E.V. Kumpjak,et al.  Multi gap switch for Marx generators , 2001, PPPS-2001 Pulsed Power Plasma Science 2001. 28th IEEE International Conference on Plasma Science and 13th IEEE International Pulsed Power Conference. Digest of Papers (Cat. No.01CH37251).

[10]  Clint Allen Hall,et al.  Isentropic compression experiments on the Sandia Z accelerator , 2000 .

[11]  B.E. Fridman,et al.  The programmed discharge of a capacitive energy store. The synthesis of a given current pulse , 1997, Digest of Technical Papers. 11th IEEE International Pulsed Power Conference (Cat. No.97CH36127).

[12]  P. Rutberg,et al.  Programmed discharge of the capacity energy storage , 1993, Ninth IEEE International Pulsed Power Conference.

[13]  M. M. Holland,et al.  The Kirkcudbright Electromagnetic Launch Facility , 1993, Ninth IEEE International Pulsed Power Conference.

[14]  A. H. Guenther,et al.  J. C. Martin on pulsed power , 1996 .

[15]  P. G. Rutberg,et al.  Application of programmable discharge of capacitive energy store for current pulse forming in railgun and electrodischarge launcher , 1995 .