Residence time distribution and heat transfer in circular pipe fitted with longitudinal rectangular wings

Numerical simulations are used to analyze the heat and mass transfer in a circular pipe fitted with longitudinal rectangular vortex generators for Reynolds number between 7500 and 15,000 based on the pipe diameter. The aim of the present study is to test and quantify the mixing efficiency of a new solution able to avoid the bypass region that exists in the center of the high efficiency vortex static mixer (HEV), and also to enhance the heat transfer without increasing the pressure losses. The rectangular wings used here generate each a streamwise counter-rotating vortex pair sweeping the volume of the mixer and act as internal agitator on the flow. The particle dispersion is investigated by analyzing Poincare sections and by studying the residence time distribution (RTD). The two approaches show much better mass transfer performance and better mixing homogeneity for the new wings arrangement. The heat transfer is also investigated and it is shown that the thermal enhancement factor in the new arrangement is much greater than that of the conventional systems used in the industry. When compared to the HEV heat exchangers it is shown that the thermal enhancement in the present configuration reaches about 40% relative to the classic HEV and 15% relative to the reversed HEV.

[1]  Jinfang Chen,et al.  Numerical study on a slit fin-and-tube heat exchanger with longitudinal vortex generators , 2011 .

[2]  M. Fiebig.  Vortices, Generators and Heat Transfer , 1998 .

[3]  P. Promvonge,et al.  Thermal performance assessment of turbulent channel flows over different shaped ribs , 2008 .

[4]  R. F. Warming,et al.  Upwind Second-Order Difference Schemes and Applications in Aerodynamic Flows , 1976 .

[5]  A. Bahadori.  Prediction of Axial Dispersion in Plug-Flow Reactors Using a Simple Method , 2012 .

[6]  H. Peerhossaini,et al.  Liquid/liquid dispersion in a chaotic advection flow , 2009 .

[7]  S. Hirschberg,et al.  An improvement of the Sulzer SMX™ static mixer significantly reducing the pressure drop , 2009 .

[8]  V. Gnielinski.  New equations for heat and mass transfer in turbulent pipe and channel flow , 1976 .

[9]  Review of Literature on Heat Transfer Enhancement in Compact Heat Exchangers , 1996 .

[10]  Michel Cabassud,et al.  Heat exchanger/reactors (HEX reactors) : Concepts, technologies: State-of-the-art , 2008 .

[11]  S. Eiamsa-ard,et al.  Thermal characteristics in a heat exchanger tube fitted with dual twisted tape elements in tandem , 2010 .

[12]  Dominique Della Valle,et al.  Enhancing heat transfer in vortex generator-type multifunctional heat exchangers , 2012 .

[13]  E. Saatdjian,et al.  On chaotic advection in a static mixer , 2012 .

[14]  Jiin-Yuh Jang,et al.  3D numerical and experimental analysis for thermal–hydraulic characteristics of air flow inside a circular tube with different tube inserts , 2009 .

[15]  Dominique Della Valle,et al.  Flow structure and heat transfer induced by embedded vorticity , 2010 .

[16]  Fernando J. Muzzio,et al.  Optimization of a static mixer using dynamical systems techniques , 1998 .

[17]  Michele Ciofalo,et al.  A study of turbulent heat transfer in curved pipes by numerical simulation , 2013 .

[18]  Henk Huisseune,et al.  Influence of the louver and delta winglet geometry on the thermal hydraulic performance of a compound heat exchanger , 2013 .

[19]  J. Ottino.  Mixing, chaotic advection, and turbulence , 1990 .

[20]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[21]  Pongjet Promvonge,et al.  Experimental investigation of heat transfer and friction characteristics in a circular tube fitted with V-nozzle turbulators☆ , 2006 .

[22]  Hassan Peerhossaini,et al.  Energy efficiency in process industry – High-efficiency vortex (HEV) multifunctional heat exchanger , 2013 .

[23]  E. Bruce Nauman,et al.  The Kenics static mixer : new data and proposed correlations , 1995 .

[24]  R. Shah,et al.  Handbook of single-phase convective heat transfer , 1987 .

[25]  Y. L. Moullec,et al.  Flow field and residence time distribution simulation of a cross-flow gas–liquid wastewater treatment reactor using CFD , 2008 .

[26]  Hassan Peerhossaini,et al.  Mass transfer and mixing by pulsatile three-dimensional chaotic flow in alternating curved pipes , 2011 .

[27]  V. C. Patel,et al.  Near-wall turbulence models for complex flows including separation , 1988 .

[28]  M. Fiebig.  Embedded vortices in internal flow: heat transfer and pressure loss enhancement , 1995 .

[29]  H. Peerhossaini,et al.  Turbulence behavior of artificially generated vorticity , 2010 .

[30]  E. B. Nauman,et al.  Static Mixers in the Process Industries—A Review , 2003 .

[31]  Masoud Rahimi,et al.  Experimental and CFD studies on heat transfer and friction factor characteristics of a tube equipped with modified twisted tape inserts , 2009 .

[32]  Philippe Carrière.  On a three-dimensional implementation of the baker’s transformation , 2007 .

[33]  Mahmoud Khaled,et al.  Spatial optimization of an underhood cooling module - Towards an innovative control approach , 2011 .

[34]  Olivier Le Corre,et al.  Entropy production and field synergy principle in turbulent vortical flows , 2011 .

[35]  Weeratunge Malalasekera,et al.  An introduction to computational fluid dynamics - the finite volume method , 2007 .

[36]  Henk Huisseune,et al.  Performance enhancement of a louvered fin heat exchanger by using delta winglet vortex generators , 2013 .

[37]  Antonie A. C. M. Beenackers,et al.  Three-dimensional numerical simulation of flow and heat transfer in the Sulzer SMX static mixer , 1999 .

[38]  Lionel Choplin,et al.  Pressure Drop of Newtonian and Non-Newtonian Fluids Across a Sulzer SMX Static Mixer , 1997 .

[39]  S. Orszag,et al.  Renormalization group analysis of turbulence. I. Basic theory , 1986 .

[40]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[41]  Dominique Della Valle,et al.  Turbulent mixing and residence time distribution in novel multifunctional heat exchangers–reactors , 2010 .

[42]  F. J. Neugebauer,et al.  A Generalized Prediction of Heat Transfer Surfaces , 1974 .

[43]  M. Wolfshtein.  The velocity and temperature distribution in one-dimensional flow with turbulence augmentation and pressure gradient , 1969 .

[44]  H. Peerhossaini,et al.  Droplets formation in turbulent mixing of two immiscible fluids in a new type of static mixer , 2003 .

[45]  Suchuan Dong,et al.  Flow past a trapezoidal tab , 2004, Journal of Fluid Mechanics.

[46]  Pongjet Promvonge,et al.  Heat transfer augmentation in a wedge-ribbed channel using winglet vortex generators , 2010 .

[47]  Takehiko Inaba,et al.  Chaotic analysis of mixing enhancement in steady laminar flows through multiple pipe bends , 2007 .