Study on practical application of a new seismic damper using a Zn–Al alloy with a nanocrystalline microstructure

Abstract Superplastic Zn–Al alloy has some excellent properties needed for a seismic damper, such as high ductility, low work hardening and no harmful metal to human health. In addition, superplastic materials with ultra-fined grains exhibit the high-strain-rate superplasticity and/or low-temperature superplasticity. Some investigations were carried out for nano-sized Zn–Al alloy in order to develop a high-performance seismic damper capable of replacing conventional dampers, such as low-yield-point steel. First, the design for appropriate structure as a damping device using superplastic Zn–Al alloy was discussed by FEM analysis. Secondly, a bulk Zn–Al alloy with nanocrystalline microstructure was manufactured by thermo-mechanical controlling process (TMCP) technology, and the tensile properties of this alloy were compared with that of low-yield-point steel. Then, the full-size cyclic testing of the damping device was carried out in order to evaluate the response for earthquake. As a result, an ecological and high performance seismic damper, the so-called “maintenance-free seismic damper”, has been successfully developed and put into actual use in a high-rise building.

[1]  S. Tanimura,et al.  Positive exponent strain-rate superplasticity in mechanically alloyed aluminum in9021 , 1991 .

[2]  Tsutomu Tanaka,et al.  Room Temperature Deformation Behavior of Zn-22 mass%Al Alloy with Nanocrystalline Structure , 2002 .

[3]  R. Pearce,et al.  Microstructural-mechanism relationship in the zinc/ aluminium eutectoid superplastic alloy , 1975 .

[4]  O. Izumi,et al.  The Influence of Mg on the Superplasticity of the Zn-22 wt%Al Alloy , 1971 .

[5]  T. Nieh,et al.  Superplasticity in Very Fine Grained Al-Based Alloys Produced by Mechanical Alloying , 1995 .

[6]  Tsutomu Tanaka,et al.  Microstructure in Zn-Al Alloys after Equal-Channel-Angular Extrusion , 2001 .

[7]  T. Langdon,et al.  Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing , 1998 .

[8]  Jeffrey Wadsworth,et al.  Superplasticity—Recent advances and future directions , 1989 .

[9]  N. P. Plakhtienko.  On Loads Acting on a Structure with a Seismic Damper , 2001 .

[10]  A. Inoue,et al.  High strain rate superplasticity in an AlNi-misch metal alloy produced from its amorphous powders , 1992 .

[11]  R. Valiev,et al.  The observation of tensile superplasticity in nanocrystalline materials , 1997 .

[12]  Tsutomu Tanaka,et al.  Capability of superplastic forming in the seismic device using Zn–22Al eutectoid alloy , 2003 .

[13]  C. Tsai,et al.  TPEA Device as Seismic Damper for High-Rise Buildings , 1995 .

[14]  R. Valiev,et al.  Bulk nanostructured materials from severe plastic deformation , 2000 .

[15]  Terence G. Langdon,et al.  Factors influencing ductility in the superplastic Zn-22 Pct Al eutectoid , 1977 .

[16]  M. Mabuchi,et al.  High strength and high strain rate superplasticity in a Mg-Mg2Si composite , 1995 .

[17]  M. Miyagawa,et al.  Effects of Microstructure Changes by Aging on the Mechanical Behaviour of Eutectoid Zn-22%Al Alloy at Room Temperature , 1974 .

[18]  M. Mabuchi,et al.  High-strain-rate superplasticity at low temperature in a ZK61 magnesium alloy produced by powder metallurgy , 1999 .

[19]  R. Valiev,et al.  Microstructural characteristics and superplastic ductility in a Zn-22% Al alloy with submicrometer grain size , 1998 .

[20]  T. Langdon,et al.  High Strain Rate Superplasticity in a Zn - 22% Al Alloy after Equal-Channel Angular Pressing , 2001 .

[21]  A. Vinogradov,et al.  Cyclic Stress-Strain Response of Pb-Sn and Zn-Al Eutectic Alloys Fine-Grained by Equal Channel Angular Pressing , 2000 .

[22]  R. Wright,et al.  The Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM4) , 2001 .

[23]  A. Ball,et al.  Superplasticity in the Aluminium–Zinc Eutectoid , 1969 .

[24]  Tsutomu Tanaka,et al.  Deformation Behavior of Nanocrystalline Zn-22wt%Al Alloy Using Thermomechanical Controlling Process , 2002 .

[25]  R. Valiev,et al.  Peculiarities of Dislocation Slip During Superplastic Deformation of Zn-Al Alloys , 1978 .

[26]  T. Langdon.  The mechanical properties of superplastic materials , 1982 .

[27]  T. Mukai,et al.  Low temperature superplasticity of a fine-grained ZK60 magnesium alloy processed by equal-channel-angular extrusion , 2002 .